Batteries9 listed
- Approved models
- 9
- Usable capacity
- 4.8-46.1 kWh
- Chemistry
- LFP
Sunsynk · manufacturer profile
The G15 to G60 stack, the L5.3 and the hybrids, profile in progress
Inverter manufacturer
Updated 3 November 2026 · Checked against the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
Sunsynk makes home batteries and hybrid inverters. The Clean Energy Council (CEC) register lists a high-voltage stack, the G15 to G60, a smaller 5.3 kWh battery, and single-phase and three-phase hybrids. We have read only Sunsynk's L5.3 manual so far, so for the rest this page prints what the register shows. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Sunsynk inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Specifications and pricing change. Confirm them with the manufacturer.
The company
The CEC register names Sunsynk Limited as the maker of every Sunsynk battery. Its hybrid inverters are registered under two names, Sunsynk Australia Pty Ltd and Sunsynk Ltd. We have not read a Sunsynk company page, so this page says nothing yet about the company's history or where it is based.
The G15 to G60 stack was approved on 8 July 2024 and the L5.3 on 5 January 2026. The hybrid inverters were approved between August 2025 and April 2026. Their listings run until 2027 or 2028.
Sunsynk's L5.3 manual lists a contact address in Wellington Street, West Perth. Before you buy, ask your installer who handles a claim or a service visit. Get the answer in writing.
The high-voltage battery is one stack, the Sunsynk G15 to G60. By the CEC register's figures it runs from 13.82 to 55.29 kWh usable, in 5.12 kWh (nominal) modules. The register lists each size separately, from the SUNSYNK-G15 to the SUNSYNK-G60, all approved on 8 July 2024 and listed until 8 July 2027. The SUNSYNK-L5.3 is a separate battery with a single listing, 4.79 kWh usable. It was approved on 5 January 2026 and is listed until 31 December 2027.
The register also lists 24 hybrid inverters, which run both solar panels and a battery. The single-phase models run from 3.6 to 16 kW, and the three-phase models from 5 to 50 kW. This page does not describe the products further.
The CEC register lists every Sunsynk battery as LFP (lithium iron phosphate), and its outdoor-use field reads no for each one. So plan for an indoor or sheltered spot, and ask the installer where the battery can go. Sunsynk's L5.3 manual rates its enclosure IP65 (dust-tight and protected against water jets) and still says to install indoors or in a sheltered enclosure. This page prints no rating for the G stack.
We have not found a Sunsynk warranty written for Australia. So this page cannot give a term, a capacity promise or a claims process. The federal energy department says many battery makers offer 10 years. That is a general figure, not a Sunsynk promise.
So the quote is where the warranty gets settled. Ask for Sunsynk's terms as they apply in Australia, the name of the company here that takes a claim, and the capacity the battery keeps at the end.
The register lists usable capacity, nothing about wear. Sunsynk's L5.3 manual gives 6,000 cycles at 90% depth of discharge, to 70% at end of life, as a laboratory figure. This page prints no such figure for the G stack.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Sunsynk inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Synergy's list names inverters, not batteries. A Sunsynk battery counts through the hybrid inverter on the quote, so that inverter's exact code is the one that counts. Our inverter library badges each model Synergy lists for the scheme. Sunsynk's L5.3 manual says to confirm a non-Sunsynk inverter with that inverter's maker. Ask the installer to put the battery and inverter pair in writing.
The WA scheme also asks the household to join a virtual power plant (VPP), a program that lets a retailer call on a group of home batteries. Synergy's own is Battery Rewards, and a battery supplier can run one too. No Sunsynk document we read names one, so ask which VPP the system can join.
The other scheme rules are on our WA battery rebate page. Our Synergy approved products guide explains what the list covers.
For now, Sunsynk is a set of listings on the Clean Energy Council (CEC) register: the G15 to G60 high-voltage stack, the smaller L5.3, and single-phase and three-phase hybrids. By the register's figures, the stack runs from 13.82 to 55.29 kWh usable in 5.12 kWh (nominal) modules. The register marks none of the batteries for outdoor use. This page prints no G stack figure beyond the register's, and we have not read a Sunsynk warranty written for Australia. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Sunsynk inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Get the G or L5.3 battery and the Sunsynk hybrid named on the quote by model code. Ask where the battery goes, since the register marks it not for outdoor use. Ask for the warranty terms that apply in Australia.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Batteries | LFP (lithium iron phosphate), 4.8-46.1 kWh usable |
|---|---|
| Approved now | 9 batteries and 24 inverters on the CEC (Clean Energy Council) register |
| Where to buy in Perth | We have not found a Perth supplier or a price yet. |
| Local support | Yes, support handled through Australian channelsSource: maker's Australian site, checked 10 May 2026Confirmed |
| Local warranty claims | Australian contact on record. Confirm the claim process with your installerListed |
| CEC listings | 33 approved right now · 0 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
9 CEC-approved batteries · grouped into 2 series
SUNSYNK-G15
SUNSYNK-G20
SUNSYNK-G25
SUNSYNK-G30
SUNSYNK-G35
SUNSYNK-G40
SUNSYNK-G45
SUNSYNK-G50
Grouped by series. Open a series for each variant, or a model for full specs.
24 CEC-approved inverters
SUNSYNK-10K-SG04LP3 (AS4777-2 2020)
SUNSYNK-12K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-12K-SG01LP1 (AS4777-2 2020)
SUNSYNK-12K-SG04LP3 (AS4777-2 2020)
SUNSYNK-14K-SG01LP1 (AS4777-2 2020)
SUNSYNK-15K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-16K-SG01LP1 (AS4777-2 2020)
SUNSYNK-20K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-25K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-29.9K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
SUNSYNK-3.6K-SG04LP1 (AS4777-2 2020)
SUNSYNK-30K-SG01HP3-AU-BM3 (AS4777-2 2020)
SUNSYNK-30K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
SUNSYNK-35K-SG01HP3-AU-BM3 (AS4777-2 2020)
SUNSYNK-35K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
SUNSYNK-40K-SG01HP3-AU-BM4 (AS4777-2 2020)
SUNSYNK-40K-SG01HP3-AU-BM4-C2 (AS4777-2 2020)
SUNSYNK-50K-SG01HP3-AU-BM4 (AS4777-2 2020)
SUNSYNK-50K-SG01HP3-AU-BM4-C2 (AS4777-2 2020)
SUNSYNK-5K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-5K-SG04LP1 (AS4777-2 2020)
SUNSYNK-6K-SG01HP3-AU-AM2 (AS4777-2 2020)
SUNSYNK-8K-SG04LP3 (AS4777-2 2020)
SUNSYNK-8K-SG05LP1 (AS4777-2 2020)
What has happened to Sunsynk on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
🔋 5 Battery Listings
Battery range expanded to 5 CEC-approved listings.
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
The CEC register names Sunsynk Limited as the maker of the G and L5.3 batteries. The hybrid inverters are registered under Sunsynk Australia Pty Ltd and Sunsynk Ltd.
By the CEC register's figures, the G15 to G60 stack runs from 13.82 to 55.29 kWh usable, in 5.12 kWh (nominal) modules. The SUNSYNK-L5.3 is a separate, single battery with 4.79 kWh usable.
This page gives no term yet. The Sunsynk terms we found are global ones. Ask the installer for the terms that apply here, in writing.
Sunsynk's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 9 CEC-approved Sunsynk battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
Sunsynk has 24 CEC-approved inverter models from 3.6-50 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.
24 of Sunsynk's 24 inverter models are hybrid inverters, which connect a home battery directly. Confirm which batteries each model supports with your installer.
Are you Sunsynk?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.