Hybrid inverter · Sunsynk · CEC approved October 2025
CEC listing: SUNSYNK-25K-SG01HP3-AU-AM2 (AS4777-2 2020)
A 25 kW three-phase hybrid inverter that is battery-ready.
Sunsynk hybrid inverters carry a broad feature set, and they can also run off-grid. The brand started in South Africa and now sells in Australia.
In Perth, the ECCO series can serve a grid-connected hybrid or an off-grid set-up.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Sunsynk SUNSYNK-25K-SG01HP3-AU-AM2, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.6% |
| Physical | |
| Dimensions (H×W×D) | 638 × 408 × 237 mm |
| Weight | 30.5 kg |
| IP rating | IP65 |
| Installation requirements | |
| AC breaker | 100 A |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Website
www.sunsynk.comThe Sunsynk SUNSYNK-25K-SG01HP3-AU-AM2 against the closest-power inverters from other brands.
| Specification | Afore AF25K-THAfore | Solplanet ASW025K-THSolplanet | |
|---|---|---|---|
| Rated power? | 25 kW | 25 kW | 25 kW |
| Max efficiency? | 97.6% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for 10 years. It does not cover issues resulting from improper installation, modifications, or environmental damage. To make a claim, customers should contact the manufacturer with proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 12 of 12. The official install manual is the authoritative source — always confirm before acting.
F01criticalCall your installerDC Inversed Failure
F01criticalCall your installerDC Inversed failure
F02criticalCall your installerDC Insulation failure
F03criticalCall your installerGFDI failure
F04criticalCall your installerGFDI Ground failure
F07criticalCall your installerDC START Failure
F16criticalCall your installerGFCI Failure
F13warningWorking Mode Change
F15warningAC OverCurr SW Failure
F56warningDC Volt Low Fault
W02warningFan input warning
W03warningGrid phase warning
SUNSYNK-29.9K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
29.9 kW · 3φ
SUNSYNK-20K-SG01HP3-AU-AM2 (AS4777-2 2020)
20 kW · 3φ
SUNSYNK-30K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
30 kW · 3φ
SUNSYNK-30K-SG01HP3-AU-BM3 (AS4777-2 2020)
30 kW · 3φ
SUNSYNK-15K-SG01HP3-AU-AM2 (AS4777-2 2020)
15 kW · 3φ
SUNSYNK-35K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)
35 kW · 3φ
Other CEC-approved products from Sunsynk available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.