Loading Solar Battery Perth...
Loading Solar Battery Perth...
SUNSYNK AUSTRALIA PTY LTD
Sunsynk has grown its Australian installer base on competitive pricing and a broad feature set. The brand has its roots in the South African market and has since expanded into Australia. For Perth installs, Sunsynk offers a feature-heavy hybrid at competitive pricing, with installer adoption still building locally.
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Rated Power
35 kW
Max Efficiency
97.6%
Phases
Three Phase
Max Input Voltage
—
Min Input Voltage
—
Max Input Current
—
Output Voltage
—
Max Output Current
—
Country of Origin
Unknown
Series
THREE-PHASE HYBRID INVERTER
Warranty
10 years
Dimensions
0 x 0 x 0 mm
IP Rating
IP65
Operating Temp
-25°C to 60°C
Cooling
Natural
Battery Compatible
No
Backup Capable
Yes
ESM Compliant
No
Black Start
No
Grid Forming
No
Export Limiting
No
Remote Monitoring
No
CEC Approved
20 Aug 2025
Approval Expiry
20 Aug 2028
Status
Active
Eligible for Rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
11
CEC-Approved Panels
0
Category
Budget
$7,000–$14,000
Perth installed price estimate · medium confidence
Prices vary by installer, configuration, and site complexity. Get exact quotes via our installer matching.
From May 1, 2026, all new battery installations in WA require CSIP-AUS compliant inverters. Verify ESM status with your installer.
Perth's high ambient temperatures (regularly 35°C+) can reduce inverter efficiency and trigger thermal throttling. For installations in direct sun or non-ventilated garages, consider inverters with active cooling and wide operating temperature ranges. All grid-connected installations require Western Power approval. Systems above 5kVA require ESM compliance under WA regulations.
Compare this inverter with batteries for a complete system analysis
Website
www.sunsynk.comThe SUNSYNK AUSTRALIA PTY LTD SUNSYNK-35K-SG01HP3-AU-BM3-C2 (AS4777-2 2020) against the closest-power inverters from other brands.
| Specification | SUNSYNK AUSTRALIA PTY LTD SUNSYNK-35K-SG01HP3-AU-BM3-C2 (AS4777-2 2020)SUNSYNK AUSTRALIA PTY LTD | ||
|---|---|---|---|
| Rated power? | 35 kW | 35 kW | 35 kW |
| Max efficiency? | 97.6%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for 10 years. It does not cover issues resulting from improper installation, modifications, or environmental damage. To make a claim, customers should contact the manufacturer with proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 6 of 6. The official install manual is the authoritative source — always confirm before acting.
F01criticalCall your installerDC Inversed Failure
F07criticalCall your installerDC START Failure
F16criticalCall your installerGFCI Failure
F13warningWorking Mode Change
F15warningAC OverCurr SW Failure
F56warningDC Volt Low Fault
Part of the SUNSYNK AUSTRALIA PTY LTD THREE-PHASE HYBRID INVERTER series
Compare every SUNSYNK AUSTRALIA PTY LTD THREE-PHASE HYBRID INVERTER variant side by side →
SUNSYNK-10K-SG04LP3 (AS4777-2 2020)
10 kW · 3φ
SUNSYNK-12K-SG01HP3-AU-AM2 (AS4777-2 2020)
12 kW · 3φ
SUNSYNK-12K-SG01LP1 (AS4777-2 2020)
12 kW · 1φ
SUNSYNK-12K-SG04LP3 (AS4777-2 2020)
12 kW · 3φ
SUNSYNK-14K-SG01LP1 (AS4777-2 2020)
14 kW · 1φ
SUNSYNK-15K-SG01HP3-AU-AM2 (AS4777-2 2020)
15 kW · 3φ
Other CEC-approved products from SUNSYNK AUSTRALIA PTY LTD available in Australia.
Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.