Hybrid inverter · Redback Technologies · Smart Inverter series · CEC approval expired
CEC listing: SI6000 (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Redback Technologies SI6000, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.3% |
| European efficiency | 96.5% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| Weight | 8.5 kg |
| IP rating | IP65 |
| Operating temperature | 25°C to 60°C |
| Installation requirements | |
| Top clearance | 50 mm |
| Side clearance | 40 mm |
| AC breaker | 40 A |
| Cable gauge | 16 mm² |
| Earthing method | Ground connection required for all grids |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
redbacktech.comThe Redback Technologies SI6000 against the closest-power inverters from other brands.
| Specification | Redback Technologies SI6000Redback Technologies | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
Exeltech warrants its inverters for one year against defects. Coverage is voided by improper installation. To claim, complete the warranty registration card.
Exeltech warrants its inverters for one year against defects. Coverage is voided by improper installation. To claim, complete the warranty registration card.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.
11, 16, 19-25criticalCall your installerSystem Fault
106warningCall your installerGrounding Cable Fault
12warningCall your installerExcess Leakage Current
2, 3, 14, 15warningCall your installerGrid Overvoltage
39warningCall your installerLow System Insulation Resistance
4, 5warningCall your installerGrid Undervoltage
8warningCall your installerGrid Overfrequency
88warningCall your installerElectric Arc Fault
9, 10warningCall your installerGrid Underfrequency / Power Outage
RED-H3-S06HV (AS4777-2 2020)
6 kW · 1φ
RED-H4-S06HV (AS4777-2 2020)
6 kW · 1φ
SH6000-G3 (AS4777-2 2020)
6 kW · 1φ
SH6000-G3 (AS4777-2 2020)
6 kW · 1φ
SH6000-G3V2 (AS4777-2 2020)
6 kW · 1φ
SI6000 (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from Redback Technologies available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.