Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Ningbo Sunways Technologies
  4. STT-5KTL-P

Solar inverter · Ningbo Sunways Technologies · CEC approved March 2026

Ningbo Sunways Technologies STT-5KTL-P

CEC listing: STT-5KTL-P (AS4777-2 2020)

A 5 kW three-phase solar inverter.

Rated power
5kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

STT-5KTL-P: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It needs a three-phase supply, so check your switchboard or ask your installer.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
5kW
How much solar it can turn into usable power at once
Max efficiency
98.1%
How much of the solar you make reaches the house
Phases
3-phase
Needs a three-phase supply, so check your switchboard
Type
Solar
Runs solar only
Warranty
5yr
How long Ningbo Sunways Technologies Co Ltd stands behind it

Full datasheet

Every figure on file for the Ningbo Sunways Technologies STT-5KTL-P, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency98.1%
European efficiency98.2%
Physical
IP ratingIP65
Installation requirements
Top clearance100 mm
Side clearance100 mm
AC breaker20 A
Cable gauge4 mm²
Earthing methodTN-S
DNSP pre-approvalYes
Estimated install time4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
4 Mar 2026
Approval expiry
20 July 2027
Status
Active
Listed for STCs
Yes

About Ningbo Sunways Technologies

Years on the CEC list
4 years
Australian office
Not verified
Category
Budget
CEC-approved inverters
42
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • Browse CEC-approved panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
21.3 kWh
Annual yield
7,756 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

4 years on the CEC list

How it compares

The Ningbo Sunways Technologies STT-5KTL-P against the closest-power inverters from other brands.

Specification
Ningbo Sunways Technologies STT-5KTL-PNingbo Sunways Technologies
Energizer FORCE 5.0HSEnergizer
Energizer Force 5.0HT+Energizer
Rated power?5 kW5 kW5 kW
Max efficiency?98.1%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesThree-phaseSingle-phaseThree-phase
TypeSolarHybridHybrid
Battery readyNoYesYes
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsOpens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manual and compliance certificatePDF, opens in a new tab

5-year inverter warranty

Ningbo Sunways Technologies STT-5KTL-P

This warranty covers defects for 5 years with exclusions for improper installation. Claim by contacting support.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Does not transfer with the home
What voids it
non-accredited installation, modification, tampering
Environment limits
/
Read the official warranty document (PDF)

Fault & error codes — Ningbo Sunways Technologies STT-5KTL-P

From the install manual

16 documented

Showing 16 of 16. The official install manual is the authoritative source — always confirm before acting.

  • Bus Voltage FaultcriticalCall your installer
    Manual (PDF)

    Input voltage exceeds inverter specifications.

    Likely cause
    Possible over-voltage from PV input.
    What to do
    Check the input voltage and disconnect if too high.
  • Inverter Over TemperaturecriticalCall your installer
    Manual (PDF)

    Inverter is overheating.

    Likely cause
    High input voltage or insufficient cooling.
    What to do
    Check input voltage, improve ventilation, and allow cooling.
  • ISO Over LimitationcriticalCall your installer
    Manual (PDF)

    Insulation resistance is below acceptable limits.

    Likely cause
    Possible insulation failure.
    What to do
    Restart the inverter and check for insulation issues.
  • PV Over VoltagecriticalCall your installer
    Manual (PDF)

    Input voltage from the PV panels is too high.

    Likely cause
    Too many PV panels connected in series.
    What to do
    Reduce the number of PV panels to ensure voltage is within limits.
  • AC Transducer FaultwarningCall your installer
    Manual (PDF)

    Issue detected with the AC measurement transducer.

    Likely cause
    Possible malfunction of AC measurement components.
    What to do
    Restart the inverter.
  • DCI FaultwarningCall your installer
    Manual (PDF)

    DC input issue detected.

    Likely cause
    Possible malfunction with the inverter's DC circuit.
    What to do
    Restart the inverter.
  • E2 FaultwarningCall your installer
    Manual (PDF)

    Unknown error code detected.

    Likely cause
    Possible internal failure or disturbance in functionality.
    What to do
    Restart the inverter.
  • Flash FaultwarningCall your installer
    Manual (PDF)

    Firmware error detected.

    Likely cause
    Possible issue during firmware execution.
    What to do
    Restart the inverter.
  • GFCI Device FaultwarningCall your installer
    Manual (PDF)

    Ground Fault Circuit Interrupter device issue.

    Likely cause
    Device malfunction or ground fault.
    What to do
    Restart the inverter and check GFCI device.
  • GFCI FaultwarningCall your installer
    Manual (PDF)

    Ground Fault Circuit Interrupter issue detected.

    Likely cause
    Possible ground fault.
    What to do
    Restart the inverter and inspect for possible grounding issues.
  • Grid Frequency Faultwarning
    Manual (PDF)

    Frequency level is outside the acceptable range.

    Likely cause
    Incorrect or poor AC cable connection.
    What to do
    Check the AC cable connection and consult local electricity standards.
  • Grid Voltage Faultwarning
    Manual (PDF)

    Voltage level is outside the acceptable range.

    Likely cause
    Cable impedance may be too high or voltage protection range not extended.
    What to do
    Investigate cabling and consult the electricity company about extending the voltage protection range.
  • Mains Lostwarning
    Manual (PDF)

    Power supply has been lost.

    Likely cause
    Check whether the mains supply is interrupted.
    What to do
    Verify mains connection, check AC breaker and terminal are well connected.
  • Relay Check FailwarningCall your installer
    Manual (PDF)

    Relay status check has failed.

    Likely cause
    Possible malfunction with internal relay components.
    What to do
    Restart the inverter.
  • SCI FaultwarningCall your installer
    Manual (PDF)

    System control issue detected.

    Likely cause
    Possible internal failure of the control system.
    What to do
    Restart the inverter.
  • SPI FaultwarningCall your installer
    Manual (PDF)

    Serial peripheral interface issue detected.

    Likely cause
    Possible communication failure.
    What to do
    Restart the inverter.

More Ningbo Sunways Technologies Co Ltd inverters

STT-5KTL (AS4777-2 2020)

5 kW · 3φ

STH-8KTL-HT-P (AS4777-2 2020)

8 kW · 3φ

STH-10KTL-HT-P (AS4777-2 2020)

10 kW · 3φ

STH-12KTL-HT-P (AS4777-2 2020)

12 kW · 3φ

STT-15KTL-P (AS4777-2 2020)

15 kW · 3φ

STT-17KTL-P (AS4777-2 2020)

17 kW · 3φ

View all Ningbo Sunways Technologies Co Ltd inverters

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?