Hybrid inverter · Ningbo Sunways Technologies · CEC approved July 2026
CEC listing: STH-10KTL-HT-P (AS4777-2 2020)
A 10 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Ningbo Sunways Technologies STH-10KTL-HT-P, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.6% |
| European efficiency | 97% |
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 0 mm |
| Side clearance | 0 mm |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Ningbo Sunways Technologies STH-10KTL-HT-P against the closest-power inverters from other brands.
| Specification | Ningbo Sunways Technologies STH-10KTL-HT-PNingbo Sunways Technologies | Energizer Force 10.0HS+Energizer | Energizer Force 10.0HT+Energizer |
|---|---|---|---|
| Rated power? | 10 kW | 10 kW | 10 kW |
| Max efficiency? | 97.6% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in the solar inverter for up to 10 years. Warranty void if not installed by an accredited installer. Claims can be made through the provided support details.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 16 of 16. The official install manual is the authoritative source — always confirm before acting.
AC Transducer FaultwarningCall your installerFault with AC transducer detected.
Bus Voltage FaultwarningCall your installerBus voltage exceeds allowed levels.
DCI FaultwarningCall your installerDC injection fault detected.
E2 FaultwarningCall your installerError code E2 indicating a fault.
Flash FaultwarningCall your installerSoftware flash corruption fault.
GFCI Device FaultwarningCall your installerFault detected in GFCI device.
GFCI FaultwarningCall your installerGround Fault Circuit Interrupter fault.
Grid Frequency FaultwarningGrid frequency is out of allowed range.
Grid Voltage FaultwarningGrid voltage is out of allowed range.
Inverter Over TemperaturewarningCall your installerInverter is overheated.
ISO Over LimitationwarningCall your installerIsolation measurement exceeds limits.
Mains LostwarningPower supply is lost.
PV Over VoltagewarningVoltage from PV input exceeds limits.
Relay Check FailwarningCall your installerRelay status check failed.
SCI FaultwarningCall your installerSerial Communication Interface fault.
SPI FaultwarningCall your installerSignal Processing Interface fault.
STH-8KTL-HT-P (AS4777-2 2020)
8 kW · 3φ
STH-12KTL-HT-P (AS4777-2 2020)
12 kW · 3φ
STT-5KTL (AS4777-2 2020)
5 kW · 3φ
STT-5KTL-P (AS4777-2 2020)
5 kW · 3φ
STT-15KTL-P (AS4777-2 2020)
15 kW · 3φ
STT-17KTL-P (AS4777-2 2020)
17 kW · 3φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.