Batteries6 listed
- Approved models
- 6
- Usable capacity
- 5-20.7 kWh
- Chemistry
- LFP
iStore · manufacturer profile
The IS-BATT stacks and the IS-HYB hybrids they run on
Inverter manufacturer
Updated 2 November 2026 · Checked against iStore's Australian warranty, manuals and datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
iStore's home battery is the IS-BATT, one power module with one to three LFP (lithium iron phosphate) battery modules, and it runs on iStore's own IS-HYB hybrid inverter. The earlier S0 stacks one to three 5 kWh modules and the newer S1 one to three 6.9 kWh modules, so the six sizes run from 5 to 20.7 kWh. Every kilowatt-hour on the label is usable. The warranty gives the S1 15 years and the S0 10 years, and a claim goes to iStore (QLD) Pty Ltd at its head office in Malaga, a Perth suburb. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The IS-HYB-5000, 6000 and 10000-1PH and the IS-HYB-5000, 6000, 10000, 15000 and 25000-3PH hybrids were on Synergy's list dated 30 October 2026. An IS-BATT on one of them pairs with an inverter listed for battery storage on Synergy's list.
Specifications and pricing change. Confirm them with the manufacturer.
The company
iStore (QLD) Pty Ltd is the company behind the IS-BATT. The warranty puts its head office in Malaga, a Perth suburb. The S0 battery's safety data sheet names it as the Australian importer at that address. The S1 sheet names it as the maker there. For a Perth home, the company a warranty claim ends up with is in the same city.
iStore says it is Australian-owned and family-run, that it started with a heat pump, and that it grew from there into hybrid inverters, batteries and monitoring. It also says it has more than 30 local support staff. Its pages give two different lengths for how long it has been going, so this page prints no years figure.
The S1 battery modules are made in Guangdong, China, and the S0 module in Guangdong.
A warranty claim starts with your installer and goes to iStore through its online returns form. The help desk takes questions by email. Proof of purchase is needed to validate a claim.
From iStore's warranty, as at March 2026.
iStore is in Perth. The warranty's head office, the importer on the safety data sheet and the letterhead on the S1 compatibility statement all give Malaga. So the company a claim ends up with has its head office in the same city as the home.
The battery and the hybrid are a matched pair. An IS-BATT runs on iStore's own IS-HYB hybrids, named in a dated compatibility statement for each range, and no iStore document we read pairs it with another brand's inverter. One hybrid handles both the panels and the battery.
The S1 is the newer stack, and it changes two things. The modules grew from 5 to 6.9 kWh and the warranty from 10 to 15 years. Every kilowatt-hour of either range is usable. The S1 datasheet rates it at 100% depth of discharge (the share of the battery the system lets you use). The register lists usable equal to nominal for all six sizes. iStore says the S1 modules connect without cables.
Six IS-BATT sizes are on the Clean Energy Council (CEC) register in our 20 October 2026 snapshot, all LFP and all listed for outdoor use. The S0 sizes are listed to 19 April 2027 and the S1 sizes to 31 December 2027. Ten IS-HYB hybrids are on the inverter register as solar-and-battery inverters, five single-phase and five three-phase. The IS-INV-3PH models are on it as solar-only inverters. No iStore product was on the CEC's de-listing or suspension tables when we read them on 29 October 2026.
One to three 6.9 kWh LFP modules under one power module, 6.9, 13.8 or 20.7 kWh, 3.5 kW per module, IP66
CEC approved
One to three 5 kWh LFP modules under one power control module, 5, 10 or 15 kWh, IP66, power control module fixed to the wall
CEC approved
Five models on the register, from the IS-HYB-5000-1PH to the IS-HYB-10000-1PH
CEC approved
Five models on the register, from the IS-HYB-5000-3PH to the IS-HYB-25000-3PH
CEC approved
Single- or three-phase, moves the home or chosen circuits onto the battery within 3 seconds, IP65
From iStore's May 2025 spec sheet
The S1 is one IS-BATT-7000-BMS power module with one, two or three IS-BATT-7000-ES battery modules under it, 6.9 kWh each. Each module brings 3.5 kW of charge and discharge power, so one module gives 3.5 kW, two give 7 kW and three give 10.5 kW. The module count on the quote sets how much the battery can run at once.
It is rated IP66 (dust-tight and protected against powerful water jets) and listed for outdoor use, with the siting rules in the safety chapter. It runs from -20 to 55 °C, cools without a fan, and is quieter than 29 decibels at a metre. A built-in heater warms the battery in cold weather, which costs some efficiency.
A full three-module stack is 1,230 mm tall and 590 mm wide, and weighs 216 kg on its floor stand. Each battery module is 68 kg. The floor stand is standard and a wall mount is an option. How many stacks one inverter takes depends on the model. The IS-HYB-5000 and 6000-1PH take one. The 10000 and 5000HC-1PH and the 5000 and 6000-3PH take two. The 10000, 15000 and 25000-3PH take four, which is 82.8 kWh, with the DTSU666 meter.
The S0 is the same idea with 5 kWh modules: one IS-BATT-5000-BMS power control module with up to three IS-BATT-5000-ES battery modules, for 5, 10 or 15 kWh. Two power control modules can be joined in parallel, and up to three inverters can be cascaded. Both modules are IP66 and cool without a fan.
The battery module runs from -20 to 55 °C, and the manual derates (cuts back) charge and discharge power above 45 °C or below -10 °C. Each module is 670 mm wide. The battery module weighs 50 kg and the power control module 12 kg, and the S0 manual says the power control module must be fixed on the wall. The cells are LFP: the safety data sheet lists a lithium iron phosphate cathode, and the register says the same.
Each range has its own dated statement. The S0 statement to the CEC, from October 2023, pairs it with the IS-HYB-5000 and 6000, single-phase and three-phase. iStore's newer hybrid datasheets cover the larger models. The June 2026 sheet for the IS-HYB-10000, 15000 and 25000-3PH lists the S0 as its battery. iStore's IS-HYB-1PH datasheet (v2.7, April 2026) lists iStore ESS batteries from 5 kWh to 30 kWh as compatible, with up to two battery stacks.
The S1 statement, issued 14 September 2026, names nine IS-HYB models: the 5000, 5000HC, 6000 and 10000 single-phase, and the 5000, 6000, 10000, 15000 and 25000 three-phase. Each needs a minimum firmware version to run the S1, and the installer checks that at commissioning. No dated iStore statement we read pairs the S1 with the IS-HYB-8000-1PH. A quote naming that pair needs iStore's written confirmation first.
No iStore document we read pairs the IS-BATT with another brand's inverter. For backup, the hybrid needs iStore's Back-up Box. It moves the home, or the circuits the installer chooses, onto the battery within 3 seconds, through a 63 A main switch with up to 40 A of output. It is IP65, comes in single- and three-phase versions, and works with eight IS-HYB models from the 5000-1PH to the 25000-3PH.
No iStore product was on the CEC's de-listing or suspension tables when we read them on 29 October 2026.
Both ranges use LFP cells. iStore says the S1 has five layers of protection, from the cell up to emergency protection. It says the S0 has four, with eight temperature sensors and an automatic fire extinguisher in each battery module. No test report we read backs those, so they stay iStore's word. The S1 datasheet also lists IEC 62619 (a safety standard for lithium battery cells and packs) among the standards it meets, and no certificate we read backs that either.
The manuals are strict about where the battery goes. Both say a sheltered spot or under an awning, out of direct sun and rain. Not within 500 m of the coast, anywhere prone to sea breeze, or in salty air. Away from daily living areas such as bedrooms, living rooms and kitchens. Each manual also lists 14 rooms to keep it out of, from toilets and bathrooms to laundries and attics, and says that list is not complete. In Australia it goes on a non-combustible base to AS/NZS 5139 (the standard for home battery installs). Installing to the manual is a warranty condition, so these rules decide the spot before the installer does.
iStore's warranty, as at March 2026, gives the S1 models 15 years and the S0 models 10 years. Either term ends sooner once a set amount of energy has gone through the battery. That applies as long as the remaining capacity still meets the warranty's end-of-life figure. The power module carries the period only. The battery and the power module are warranted independently.
The warranty prints one energy figure for each range without saying whether it is per module or per stack. Until iStore confirms which, this page does not read it either way.
Five conditions matter most. The battery must stay connected to iStore's monitoring platform. It must be installed within 31 days of purchase, and any fault reported to iStore within two weeks. It must be installed to the manual, and the recommended working temperature is 15 to 30 °C. Every install and every replacement must be done by a CEC-accredited installer who has completed iStore's service training. And a battery left uncharged or uncycled for long periods loses cover for cell damage.
On a claim, iStore ships a replacement battery within 20 days of confirming the return. The warranty prints that as calendar days in one place and business days in another. The replacement is of the same age and condition as the original and is covered for the rest of the original term. The faulty unit goes back within 15 business days at iStore's postage cost. On-site labour is not promised. iStore may pay a fixed rebate per incident to a verified installer, at its discretion, and travel time sits outside the service times.
The warranty excludes surges and lightning, vermin, transit damage, a site outside the manual's rules, poor ventilation, skipped software updates, and any opening of the cover. The warranty carries the Australian Consumer Law guarantee statement. It also gives a free trial of iStore's premium Envision monitoring at commissioning. Once the standard warranty ends, a subscription may be payable. The IS-HYB hybrids carry 10 years, the smart meter five and the Back-up Box two.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The IS-HYB-5000, 6000 and 10000-1PH and the IS-HYB-5000, 6000, 10000, 15000 and 25000-3PH hybrids were on Synergy's list dated 30 October 2026. An IS-BATT on one of them pairs with an inverter listed for battery storage on Synergy's list.
Synergy's list names inverters, not batteries, so an IS-BATT counts through the IS-HYB hybrid on the quote. The exact model code is the one that counts. Our inverter library badges each model Synergy lists for the scheme.
iStore's inverters on Synergy's list are marked activation-ready for a Synergy VPP program (list dated 30 October 2026). The scheme has a second condition: the household joins a virtual power plant (VPP), which lets a retailer draw on many home batteries at once. Synergy's VPP is Battery Rewards. A VPP offered by the battery supplier can count instead, under the scheme's own rules.
Our WA battery rebate page carries the scheme's other conditions, and our guide to Synergy's approved products explains the list.
iStore's website lists four distributors, and the one in WA shares iStore's Malaga head office address. That page carries no date, so no iStore document we read confirms current stock in Perth. A quote from a listed Perth installer should name the IS-BATT size, the module count and the IS-HYB model it runs on.
An iStore system is an IS-BATT stack on an iStore IS-HYB hybrid, with the company behind the warranty in Malaga. The S1 gives 6.9 to 20.7 kWh with 15 years of warranty, and the S0 5 to 15 kWh with 10. The manuals rule out a spot within 500 m of the coast or anywhere prone to sea breeze, and the battery has to stay connected to iStore's monitoring. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The IS-HYB-5000, 6000 and 10000-1PH and the IS-HYB-5000, 6000, 10000, 15000 and 25000-3PH hybrids were on Synergy's list dated 30 October 2026. An IS-BATT on one of them pairs with an inverter listed for battery storage on Synergy's list.
Ask for the IS-BATT model, the module count and the IS-HYB model, each by code. In our 20 October 2026 CEC snapshot all six IS-BATT sizes are listed, the S0 to 19 April 2027 and the S1 to 31 December 2027. All ten IS-HYB hybrids are listed as solar-and-battery inverters, the earliest to 9 May 2027. On Synergy's list dated 30 October 2026, the IS-HYB-5000, 6000 and 10000-1PH and the IS-HYB-5000, 6000, 10000, 15000 and 25000-3PH hybrids carry the WA scheme flag. If the quote pairs the S1 with the IS-HYB-8000-1PH, ask your installer for iStore's written confirmation first.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 15 years on the IS-BATT S1 and 10 years on the S0iStore's warranty, as at March 2026 |
|---|---|
| Batteries | LFP (lithium iron phosphate), 5-20.7 kWh usable |
| Approved now | 6 batteries and 12 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office. Contact details |
| Local support | Yes, support handled through Australian channelsSource: maker's Australian document, checked 2 Nov 2026Confirmed |
| CEC listings | 18 approved right now · 0 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
6 CEC-approved batteries
IS-BATT-10000-S0
IS-BATT-14000-S1
IS-BATT-15000-S0
IS-BATT-21000-S1
IS-BATT-5000-S0
IS-BATT-7000-S1
Grouped by series. Open a series for each variant, or a model for full specs.
12 CEC-approved inverters · grouped into 2 series
IS-HYB-10000-1PH (AS4777-2 2020)
IS-HYB-10000-3PH (AS4777-2 2020)
IS-HYB-15000-3PH (AS4777-2 2020)
IS-HYB-25000-3PH (AS4777-2 2020)
IS-HYB-5000-1PH (AS4777-2 2020)
IS-HYB-5000-3PH (AS4777-2 2020)
IS-HYB-5000HC-1PH (AS4777-2 2020)
IS-HYB-6000-1PH (AS4777-2 2020)
IS-HYB-6000-3PH (AS4777-2 2020)
IS-HYB-8000-1PH (AS4777-2 2020)
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 6 kW | Max Discharge 6 kW | Max Backup 5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 6 kW | Max Discharge 6 kW | Max Backup 5 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 5.75 kW | Max Discharge 5.75 kW | Max Backup 7.5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 5.1 kW | Max Discharge 5.1 kW | Max Backup 10 kW |
* The iStore 10kW 1P has a maximum charge rate of 5kWh
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 3.3 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 3.3 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 3.3 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 3.3 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 6 kW | Max Discharge 6 kW | Max Backup 3.3 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 6 kW | Max Discharge 6 kW | Max Backup 3.3 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 7.5 kW | Max Discharge 7.5 kW | Max Backup 7.5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 5kWh + 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 5kWh + 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 7.5 kW | Max Discharge 7.5 kW | Max Backup 7.5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 5kWh + 10/15kWh | Max Charge 12.5 kW | Max Discharge 12.5 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 5kWh + 10/15kWh | Max Charge 15 kW | Max Discharge 15 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 10/15kWh | Max Charge 15 kW | Max Discharge 15 kW | Max Backup 8.3 kW |
| Configuration | Capacity | Max Charge | Max Discharge | Max Backup |
|---|---|---|---|---|
| 1x stack | Capacity 5kWh | Max Charge 2.5 kW | Max Discharge 2.5 kW | Max Backup 2.5 kW |
| 1x stack | Capacity 10/15kWh | Max Charge 5 kW | Max Discharge 5 kW | Max Backup 5 kW |
| 2x stacks | Capacity 5kWh + 10/15kWh | Max Charge 7.5 kW | Max Discharge 7.5 kW | Max Backup 7.5 kW |
| 2x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 5kWh + 10/15kWh | Max Charge 12.5 kW | Max Discharge 12.5 kW | Max Backup 8.3 kW |
| 3x stacks | Capacity 10/15kWh | Max Charge 10 kW | Max Discharge 10 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 5kWh + 10/15kWh | Max Charge 17.5 kW | Max Discharge 17.5 kW | Max Backup 8.3 kW |
| 4x stacks | Capacity 10/15kWh | Max Charge 20 kW | Max Discharge 20 kW | Max Backup 8.3 kW |
Understanding Power Ratings:
* DC charge/discharge power varies from AC power due to inverter efficiency. Always consult with your installer for specific system design.
What has happened to iStore on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
⚡ 5 Inverter Models Listed
Inverter range expanded to 5 CEC-approved models.
iStore says it is Australian-owned and family-run. The company behind the warranty is iStore (QLD) Pty Ltd, with its head office in Malaga, a Perth suburb. The S1 battery modules are made in Guangdong, China, and the S0 module in Guangdong.
iStore's own IS-HYB hybrids. The S0 statement pairs it with the IS-HYB-5000 and 6000, single-phase and three-phase. The S1 statement from September 2026 names nine IS-HYB models, from the 5000-1PH to the 25000-3PH. No iStore document we read pairs the IS-BATT with another brand's inverter.
Your installer first, with the claim lodged through iStore's online returns form and proof of purchase. It goes to iStore (QLD) Pty Ltd in Malaga. iStore ships a replacement battery within 20 days of confirming the return, which the warranty prints as calendar days in one place and business days in another. The help desk email is in the Support in Australia section above.
Yes, with conditions. Both ranges are IP66 and the register lists them for outdoor use, and the manuals ask for an awning or a sheltered spot out of direct sun and rain. They rule out a site within 500 m of the coast or anywhere prone to sea breeze. They keep it away from daily living areas such as bedrooms, living rooms and kitchens, and each lists 14 rooms to keep it out of, from toilets and bathrooms to laundries and attics, a list it says is not complete.
iStore is headquartered in Malaga, WA, Australia. Its products are sold in Australia through SAA-accredited installers.
iStore's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 6 CEC-approved iStore battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
iStore has 12 CEC-approved inverter models from 5-40 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.
Are you iStore?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.