Hybrid inverter · iStore · CEC approved May 2026
CEC listing: IS-HYB-5000HC-1PH (AS4777-2 2020)
A 5 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the iStore IS-HYB-5000HC-1PH, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Efficiency | |
| Max efficiency | 98.4% |
| European efficiency | 97.8% |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 500 mm |
| Side clearance | 500 mm |
| AC breaker | 50 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.istore.net.auThe iStore IS-HYB-5000HC-1PH against the closest-power inverters from other brands.
| Specification | iStore IS-HYB-5000HC-1PHiStore | Cornick Genius IA5Cornick | Hinen A5000SHinen |
|---|---|---|---|
| Rated power? | 4.999 kW | 4.999 kW | 4.999 kW |
| Max efficiency? | 98.4% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Solar | Hybrid |
| Battery ready | Yes | No | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers parts and labor for 10 years, with a 2-year free extension. Warranty voids if improperly installed or modified. Claims can be made through support channels.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.
2001criticalCall your installerHigh string input voltage
2002criticalCall your installerDC Arc Fault
2003criticalCall your installerDC arc fault
2011criticalCall your installerString reverse connection
2021criticalCall your installerAFCI self-check failure
2031criticalCall your installerPhase wire short-circuited to PE
2032criticalGrid loss
2033criticalCall your installerGrid undervoltage
2034criticalCall your installerGrid overvoltage
2036criticalCall your installerGrid Overfrequency
2037criticalCall your installerGrid Underfrequency
2064criticalCall your installerDevice Fault
2012warningString current backfeed
IS-HYB-5000-1PH (AS4777-2 2020)
5 kW · 1φ
IS-HYB-6000-1PH (AS4777-2 2020)
6 kW · 1φ
IS-HYB-8000-1PH (AS4777-2 2020)
8 kW · 1φ
IS-HYB-10000-1PH (AS4777-2 2020)
9.999 kW · 1φ
IS-HYB-5000-3PH (AS4777-2 2020)
5 kW · 3φ
IS-HYB-6000-3PH (AS4777-2 2020)
6 kW · 3φ
Other CEC-approved products from iStore available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.