Hybrid inverter · Star Charge · CEC approved August 2025
CEC listing: SI803SENA00 (AS4777-2 2020)
An 8 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Star Charge SI803SENA00, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Star Charge SI803SENA00 against the closest-power inverters from other brands.
| Specification | Star Charge SI803SENA00Star Charge | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 1 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in material or workmanship for one year if installed and maintained correctly. Exclusions include improper installation, modifications, and misuse. Claims must be submitted within 60 days of discovering a defect.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 22 of 22. The official install manual is the authoritative source — always confirm before acting.
F-104criticalCall your installerInverter grid-connected relay fault
F-110criticalCall your installerLeakage current detection unit fault
F-111criticalCall your installerLeakage current fault
F-112criticalCall your installerDC insulation fault
F-113criticalCall your installerLeakage current detection consistency error (Major)
F-114criticalCall your installerFrequency detection consistency error (Major)
F-115criticalCall your installerPower grid voltage detection consistency error (Major)
F-123criticalCall your installerSecondary memory failure
F-124criticalCall your installerClock failure
F-125criticalCall your installerInternal communication failure
F-129criticalCall your installerMain memory failure
F-100warningOver temperature
F-101warningCall your installerHigh DC input voltage
F-103warningCall your installerUnconnected grid
F-105warningCall your installerGrid frequency fault
F-106warningCall your installerGrid voltage fault
F-107warningCall your installerDC component over range
F-108warningCall your installerCurrent sensor fault
F-109warningCall your installerFail safe
F-116infoCall your installerLeakage current detection consistency error (Minor)
F-117infoCall your installerFrequency detection consistency error (Minor)
F-118infoCall your installerPower grid voltage detection consistency error (Minor)
AD20074EU1923 (AS4777-2 2020)
7.4 kW · 1φ
SI603SENA00 (AS4777-2 2020)
6 kW · 1φ
SI503SENA00 (AS4777-2 2020)
5 kW · 1φ
AD20110EU1993 (AS4777-2 2020)
11 kW · 3φ
SI105TENT05 (AS4777-2 2020)
100 kW · 3φ
Other CEC-approved products from Star Charge available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.