Solar inverter · Star Charge · CEC approved April 2026
CEC listing: AD20110EU1993 (AS4777-2 2020)
An 11 kW three-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us
Every figure on file for the Star Charge AD20110EU1993, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 152 mm |
| Side clearance | 152 mm |
| AC breaker | 60 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Star Charge AD20110EU1993 against the closest-power inverters from other brands.
| Specification | Star Charge AD20110EU1993Star Charge | Ningbo Sunways Technologies STS-11KTLNingbo Sunways Technologies | GivEnergy GIV-3HY-11.0-HVGivEnergy |
|---|---|---|---|
| Rated power? | 11 kW | 11 kW | 11 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Plain-English warranty summary not yet extracted for this product. The official warranty document is the authoritative source.
From the install manual
Showing 6 of 6. The official install manual is the authoritative source — always confirm before acting.
EV4018criticalCall your installerInverter (BDI) is unavailable - SYSTEM FAULT
EV4299criticalCall your installerCharger configuration error
EV5016criticalCall your installerMaster CSU and AC charger communication failure
EV4280warningCall your installerAC charging connector: AC drop
EV5006warningCall your installerCommunication failure
EV500ewarningCall your installerMaster CSU and OCPP Communication failure
SI105TENT05 (AS4777-2 2020)
100 kW · 3φ
SI803SENA00 (AS4777-2 2020)
8 kW · 1φ
AD20074EU1923 (AS4777-2 2020)
7.4 kW · 1φ
SI603SENA00 (AS4777-2 2020)
6 kW · 1φ
SI503SENA00 (AS4777-2 2020)
5 kW · 1φ
Other CEC-approved products from Star Charge available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.