Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Star Charge
  4. AD20074EU1923

Solar inverter · Star Charge · CEC approved March 2026

Star Charge AD20074EU1923

CEC listing: AD20074EU1923 (AS4777-2 2020)

A 7.4 kW single-phase solar inverter.

Rated power
7.4kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

AD20074EU1923: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
7.4kW
How much solar it can turn into usable power at once
Max efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
Type
Solar
Runs solar only
Warranty
Not on file: we don't have this figure from the manufacturer's documents yet
How long Wanbang Digital Energy Co Ltd stands behind it

Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the Star Charge AD20074EU1923, by section.

Full datasheet, by section
SpecificationValue
Installation requirements
Top clearance152 mm
Side clearance152 mm
AC breaker60 A
Cable gauge10 mm²
Earthing methodTN-S
DNSP pre-approvalYes
Estimated install time8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
25 Mar 2026
Approval expiry
25 Mar 2029
Status
Active
Listed for STCs
Yes

About Star Charge

Years on the CEC list
1 years
Australian office
Not verified
Category
Budget
CEC-approved inverters
6
CEC-approved batteries
5
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
31.4 kWh
Annual yield
11,479 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years on the CEC list

How it compares

The Star Charge AD20074EU1923 against the closest-power inverters from other brands.

Specification
Star Charge AD20074EU1923Star Charge
Delta H8EDelta
GoodWe GW7.5K-MS-G40GoodWe
Rated power?7.4 kW7.36 kW7.5 kW✓highest
Max efficiency?Not on fileNot on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeSolarHybridSolar
Battery readyNoYesNo
WarrantyNot on fileNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetOpens in a new tab
  • Warranty termsOpens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab
  • Compliance certificateOpens in a new tab

Inverter warranty

Star Charge AD20074EU1923

Plain-English warranty summary not yet extracted for this product. The official warranty document is the authoritative source.

Read the official warranty document (PDF)

Fault & error codes — Star Charge AD20074EU1923

From the install manual

6 documented

Showing 6 of 6. The official install manual is the authoritative source — always confirm before acting.

  • EV4018criticalCall your installer
    Manual (PDF)

    Inverter (BDI) is unavailable - SYSTEM FAULT

    Likely cause
    Communication failure between the Inverter and the Hub
    What to do
    Ensure all connections are secure and check the system status in the app. If the issue persists, contact support.
  • EV4299criticalCall your installer
    Manual (PDF)

    Charger configuration error

    Likely cause
    DIP switch not set correctly
    What to do
    Check the DIP switch settings and ensure they match the required settings for the installation.
  • EV5016criticalCall your installer
    Manual (PDF)

    Master CSU and AC charger communication failure

    Likely cause
    Failure in communication between the charger and the main control unit
    What to do
    Restart the Charger and check for any loose connections. If the issue persists, contact support.
  • EV4280warningCall your installer
    Manual (PDF)

    AC charging connector: AC drop

    Likely cause
    Insufficient AC power being supplied to the Charger
    What to do
    Inspect the power source and ensure it meets the required specifications for charging.
  • EV5006warningCall your installer
    Manual (PDF)

    Communication failure

    Likely cause
    Loss of communication with ACSU or AC charger
    What to do
    Check all communication cables and connection integrity.
  • EV500ewarningCall your installer
    Manual (PDF)

    Master CSU and OCPP Communication failure

    Likely cause
    Network communication issues between devices
    What to do
    Check network connectivity and ensure all devices are powered on. Restart the affected devices if necessary.

More Wanbang Digital Energy Co Ltd inverters

SI803SENA00 (AS4777-2 2020)

8 kW · 1φ

SI603SENA00 (AS4777-2 2020)

6 kW · 1φ

SI503SENA00 (AS4777-2 2020)

5 kW · 1φ

AD20110EU1993 (AS4777-2 2020)

11 kW · 3φ

SI105TENT05 (AS4777-2 2020)

100 kW · 3φ

View all Wanbang Digital Energy Co Ltd inverters

More from Star Charge

Other CEC-approved products from Star Charge available in Australia.

Star Charge Batteries

vBox-10

9.3 kWh · LFP

vBox-14

12.4 kWh · LFP

vBox-17

15.6 kWh · LFP

vBox-20

18.6 kWh · LFP

vBox-7

6.2 kWh · LFP

View all Star Charge batteries
View full Star Charge manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?