Solar inverter · Star Charge · CEC approved October 2025
CEC listing: SI105TENT05 (AS4777-2 2020)
A 100 kW three-phase solar inverter.
Commercial-scale inverter
At 100 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us
Every figure on file for the Star Charge SI105TENT05, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP20 |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
The Star Charge SI105TENT05 against the closest-power inverters from other brands.
| Specification | Star Charge SI105TENT05Star Charge | Solplanet ASW100K-LTSolplanet | Delta PCS100Delta |
|---|---|---|---|
| Rated power? | 100 kW | 100 kW | 100 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Single-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
This warranty covers defects in materials and workmanship for a specified period. It is important to avoid non-accredited installations and modifications to keep the warranty valid.
This warranty covers defects in materials and workmanship for a specified period. It is important to avoid non-accredited installations and modifications to keep the warranty valid.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 6 of 6. The official install manual is the authoritative source — always confirm before acting.
D8P-B-FAULTcriticalCall your installerRestart inverter or contact installer
DCInj-FAUXTcriticalCall your installerRestart Inverter or connected bus terminal
OV-G-V01criticalOver grid voltage
Haley016-FALLwarningCheck inserter inclusion connection
OV-G-F01warningOver grid frequency
UN-G-V01warningUnder grid voltage
AD20110EU1993 (AS4777-2 2020)
11 kW · 3φ
SI803SENA00 (AS4777-2 2020)
8 kW · 1φ
AD20074EU1923 (AS4777-2 2020)
7.4 kW · 1φ
SI603SENA00 (AS4777-2 2020)
6 kW · 1φ
SI503SENA00 (AS4777-2 2020)
5 kW · 1φ
Other CEC-approved products from Star Charge available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.