Solar inverter · Tbb Power · CEC approval expired
A 6 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Tbb Power CK6.0S, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 94% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| Weight | 33 kg |
| IP rating | IP20 |
| Operating temperature | 20°C to 25°C |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Tbb Power CK6.0S against the closest-power inverters from other brands.
| Specification | Tbb Power CK6.0STbb Power | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | 94.0% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 2 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for two years. It excludes damage caused by improper installation or use in life-retaining equipment, and claims can be made by providing proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.
CoolSys_ErrcriticalCooling system is abnormal
EPOcriticalCall your installerEmergency stop
Instant_OC_SoftcriticalInstantaneous over current
Output_ShortCutcriticalOutput short circuit
PSU_FaultcriticalCall your installerAuxiliary power supply is abnormal
Rly_ErrcriticalCall your installerRelay is abnormal
Sam_HD_FaultcriticalCall your installerSampling is abnormal
T_HS_OTcriticalHeat sink's temperature is too high
U_BAT_Low_DepcriticalCall your installerBattery is severe under voltage
U_Bus_HW_ProcriticalHardware protection against DC bus over voltage
U_Bus_LVcriticalDC bus is under voltage
U_Bus_OVcriticalDC bus is over voltage
EEPROM_FailwarningCall your installerROM is abnormal
Output_OverLoadwarningOutput over load
T_TX_OTwarningTransformer's temperature is too high
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.