SolarEdge · manufacturer profile

SolarEdge battery review

The Home Battery and the Home Battery 48V

Inverter manufacturer

Updated 5 November 2026 · Checked against SolarEdge's Australian datasheets and Home Battery warranty, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth

In short

SolarEdge sells the inverter and the battery as separate boxes. Its two home batteries run on its own inverters. The Home Battery holds 9.7 kWh usable and goes on the single-phase inverters, up to three on one inverter. The Home Battery 48V holds 4.85 kWh usable and goes on one three-phase inverter, up to five modules. Both carry a 10-year Australian warranty. The Home Battery's puts no cycle limit on standard solar use. SolarEdge's own Australian company in Melbourne is the importer named on that warranty. SolarEdge is ending its direct sales in Australia, as reported on 5 November 2026. Weigh support before a new install. Existing systems keep working. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, SolarEdge's listings for the WA Battery Scheme are the SINGLE PHASE INVERTER series and 5 of the 14 models in the THREE PHASE INVERTER series. In our inverter library, each model Synergy lists for the scheme carries the "Listed for battery storage on Synergy's list" badge.

Specifications and pricing change. Confirm them with the manufacturer.

  • 27Products on the CEC list today
On this page

The company

About SolarEdge

SolarEdge (often typed Solar Edge) says it was incorporated in Delaware, in the US, in 2006. It also says its shares trade on the NASDAQ as SEDG. No SolarEdge document we read gives a founding year. The Clean Energy Council (CEC) register shows the shape of the company instead. It is an inverter maker, and its batteries are listed as pre-assembled battery systems: batteries sold without an inverter of their own.

Two home batteries sit on that register, the 9.7 kWh Home Battery and the 4.85 kWh Home Battery 48V. SolarEdge's single-phase inverters are listed for solar and battery. On three-phase supply, four -AUB models and the SE10K-RWB48 take a battery. The larger SE15K and up are listed for solar only. SolarEdge's commercial-scale systems are outside this page.

In Australia, SolarEdge Technologies (Australia) Pty Ltd in Melbourne is the importer named on the Home Battery warranty. The warranty itself is given by SolarEdge Technologies Ltd. A fault is reported to SolarEdge by email. As reported in November 2026, support now runs through SolarEdge's international call centre and online self-help.

Support in Australia

A Home Battery fault is reported to SolarEdge by email. The Australian warranty names SolarEdge's Melbourne company as the importer behind it. As reported on 5 November 2026, warranty and technical support now run through SolarEdge's international call centre and online self-help.

From SolarEdge's Australian Home Battery warranty, revised December 2024, read 2 November 2026.

What's different about SolarEdge?

SolarEdge is an inverter company first, and the battery is built around the inverter. The Home Battery datasheet names three inverter families it runs on, all SolarEdge.

The SolarEdge range

Two batteries and the inverters they run on make up this page. The Home Battery (BAT-10K1P) and the Home Battery 48V (BAT-05K48) are both on the CEC register to December 2027. The single-phase inverters are listed to January 2027, and their -MM versions to May 2027. The four -AUB models are listed to 17 December 2026. The SE10K-RWB48 runs to November 2028. The SE15K and larger are on the register for solar only.

  • Home Battery (BAT-10K1P)

    9.7 kWh usable, all of its capacity; chemistry recorded as lithium-ion on the register; listed for outdoor use

    CEC approved

  • Home Battery 48V (BAT-05K48)

    4.85 kWh usable from 5.12 kWh; LFP (lithium iron phosphate) cells; listed for outdoor use

    CEC approved

  • Single-phase inverters

    SE3000H, SE5000H, SE6000H, SE8250H and SE10000H, plus their -MM versions, listed for solar and battery

    CEC approved

  • Three-phase battery inverters

    SE5K-AUB, SE7K-AUB, SE8.25K-AUB and SE10K-AUB, and the SE10K-RWB48

    CEC approved

What does SolarEdge's direct exit from Australia mean?

SolarEdge is ending its direct sales in Australia, by its notice to approved installers as reported in the trade press on 5 November 2026. The notice covers inverters, solar panels, batteries and EV chargers.

What is the SolarEdge Home Battery?

The Home Battery is SolarEdge's 9.7 kWh unit, filed on the register as BAT-10K1P. Its Australian datasheet gives 9,700 Wh usable at 100% depth of discharge.

How does the Home Battery 48V work?

The Home Battery 48V is the smaller, three-phase unit. Each module holds 5.12 kWh in total and 4.85 kWh usable at 100% depth of discharge.

Which inverter does each SolarEdge battery pair with?

The Home Battery datasheet names three inverter families: Home Genesis, Home Hub and the three-phase SExK-AUB. The Home Genesis datasheet maps that family to five codes: SE3000H, SE5000H, SE6000H, SE8250H and SE10000H.

How safe is a SolarEdge Home Battery?

The Home Battery 48V uses LFP cells. For the Home Battery, the register records lithium-ion and nothing more exact. No SolarEdge document we read names its cell chemistry. Both batteries are listed for outdoor use.

What does the SolarEdge warranty cover in Australia?

The Home Battery carries 10 years in Australia. The term starts when SolarEdge's monitoring portal records the install, or 12 months after shipping if that is earlier.

Does a SolarEdge battery qualify for the WA battery rebate?

Showing: Western Australia, Synergy network. Other states: not covered yet

A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, SolarEdge's listings for the WA Battery Scheme are the SINGLE PHASE INVERTER series and 5 of the 14 models in the THREE PHASE INVERTER series. In our inverter library, each model Synergy lists for the scheme carries the "Listed for battery storage on Synergy's list" badge.

Synergy's list names inverters, not batteries. A SolarEdge battery counts through the inverter it is paired with, so the inverter code on the quote is the line to check.

Where SolarEdge fits in WA

A SolarEdge battery is bought with a SolarEdge inverter, so the inverter line on the quote settles the battery line. On single-phase supply the battery is the 9.7 kWh Home Battery, up to three on one inverter. On three-phase supply it is one Home Battery on an SE5K-AUB to SE10K-AUB. Or it is the 4.85 kWh Home Battery 48V on an SE10K-RWB48, up to five modules. Both batteries are listed for outdoor use. The Home Battery needs its link to SolarEdge monitoring for the warranty to hold. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, SolarEdge's listings for the WA Battery Scheme are the SINGLE PHASE INVERTER series and 5 of the 14 models in the THREE PHASE INVERTER series. In our inverter library, each model Synergy lists for the scheme carries the "Listed for battery storage on Synergy's list" badge.

A good fit if

  • Your quote pairs the battery with a SolarEdge Home Genesis, Home Hub or -AUB inverter, by code
  • Your home is single-phase and you may want up to three batteries on one inverter
  • Your home is three-phase and the quote names an SE10K-RWB48 with the Home Battery 48V

Might not suit you if

  • Your three-phase quote names an SE15K or larger (the register lists them for solar only)
  • You want more than one battery on an SE5K-AUB to SE10K-AUB (SolarEdge allows one per home)
  • The battery would sit on another maker's inverter, or offline from SolarEdge monitoring

Ask for the battery and inverter codes in writing. If the quote names an -AUB inverter, its CEC listing runs to 17 December 2026. If it names a Home Hub code, ask for the current datasheet behind it. SolarEdge is ending its direct sales in Australia, as reported on 5 November 2026. Support continues through its international call centre, so weigh that before a new install.

Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.

For checking

Key facts

Warranty10 years on both home batteriesSolarEdge's Australian Home Battery warranty and datasheets
BatteriesLFP (lithium iron phosphate), Lithium-ion, 4.9-9.7 kWh usable
Approved now2 batteries and 25 inverters on the CEC (Clean Energy Council) register
Support in AustraliaOffice. Contact details
CEC listings27 approved right now · 10 delistedApproved
Documents

Everything on the CEC register

SolarEdge by product type

Each product type at a glance. The full lists, grouped by series, are below.

Inverters31 listed

Approved models
25
Power range
3-100 kW
Hybrid models
15 of 25
Phases
10 single phase · 15 three phase
Inverter types
15 hybrid · 9 standard · 1 battery inverter

Panels4 listed

Approved models
All expired
Power range
370-415 W

We haven't reviewed SolarEdge panels in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare panels from other brands

SolarEdge full lists, by product type

Pick a type to open its full list, grouped by series.

Market timeline

What has happened to SolarEdge on the CEC register.

Approved right now
272 batteries · 25 inverters
Delisted
10Of 37 ever listed
Safety notices
0None on our record

Events on the register, by year

  • Approval or launch
  • Safety
  • Other

Each block is one register event. Tap a year to see its events in the list below.

Key moments

2 of 17 events
  1. 2020

    Home Battery 48V Launch

    Integrated battery solution for SolarEdge inverters

    Approval
  2. 2025

    ⚡ 20 Inverter Models Listed

    Inverter range expanded to 20 CEC-approved models.

    Approval

Questions about SolarEdge

About SolarEdge

How many SolarEdge batteries can go on one inverter?

Up to three Home Batteries on a single-phase Home Genesis or Home Hub inverter, by the battery's datasheet. On the three-phase SE5K-AUB to SE10K-AUB it is one battery and one inverter per home. The Home Battery 48V runs on the SE10K-RWB48, with up to five modules in parallel.

Does a SolarEdge battery need an internet connection?

The Home Battery does, for its warranty. The Australian warranty holds only while the battery stays linked to SolarEdge monitoring for the whole 10 years. The term itself starts when that portal records the install. For the Home Battery 48V, the Australian retention terms are in a document we did not read.

Which SolarEdge inverters take a battery?

On the CEC register, five single-phase codes are listed for solar and battery: SE3000H, SE5000H, SE6000H, SE8250H and SE10000H, plus their -MM versions. On three-phase supply it is the SE5K-AUB, SE7K-AUB, SE8.25K-AUB and SE10K-AUB, and the SE10K-RWB48. The SE15K and larger are listed for solar only.

Who handles a SolarEdge warranty claim in Perth?

Email SolarEdge. The Home Battery warranty says a fault is reported to SolarEdge by email, during the warranty period. The importer it names is SolarEdge Technologies (Australia) Pty Ltd, in Melbourne. As reported on 5 November 2026, support now runs through SolarEdge's international call centre and online self-help. The email address is in the Support in Australia section above.

Is SolarEdge still sold in Australia?

As reported in the trade press on 5 November 2026, SolarEdge's notice to installers ends its direct sales in Australia. Orders close after about a fortnight, for delivery by 18 December 2026. Existing systems keep working, and support continues through SolarEdge's international call centre. Weigh that support before a new install.

Which SolarEdge battery suits a three-phase home in Perth?

On three-phase supply it is one Home Battery on an SE5K-AUB to SE10K-AUB, and SolarEdge allows one battery and one inverter per home on them. Or it is the 4.85 kWh Home Battery 48V on an SE10K-RWB48, up to five modules. The SE15K and larger are listed for solar only.

Where is SolarEdge based?

SolarEdge is headquartered in Herzliya, Israel. Its products are sold in Australia through SAA-accredited installers.

Batteries

What battery chemistry does SolarEdge use?

SolarEdge's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.

Sources

Are you SolarEdge?

Help us keep this profile up to date.

Get in touch

Where next

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.