Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: Nov 2025Report outdated info

SolarEdge BAT-05K48

Name: SolarEdge BAT-05K48
Brand: SolarEdge

SolarEdge Home Battery 48V series

CEC Approved

View datasheet (PDF)

Part of SolarEdge Home Battery 48V — see all configurations

Usable capacity: 4.85 kWh
Round-trip efficiency: 92%
Warranty: 10 yr
Chemistry: LFP

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: LFP

Capacity & power

Nominal capacity: 5.12 kWh
Usable capacity: 4.85 kWh

Lifespan & degradation

Capacity retained at year 10: 80%
Warranted throughput: 4600 MWh

Physical

IP rating: IP65

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The SolarEdge Home Battery has a 10-year warranty covering defects and performance. It's void if not installed by accredited professionals or misused. Claims can be made via SolarEdge's support.

Duration

years

Throughput

4600

MWh

Max Temp

45°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Australian Office15 years in AU market

SolarEdge Australia

Direct manufacturer warranty. Australian consumer law applies.

Perth climate suitability

Suitable with precautions

Rated to 45°C. Plan for a shaded or garage install through Perth summers.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 92% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 45°C

✗ Non-transferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

AC-coupled system: needs a gateway device on the Synergy SSL (e.g. SMA, Redback) for full eligibility, or a same-brand inverter + battery pair (Sungrow or Fronius) for shared compliance. Without one, export is limited to 1.5kW and VPP/DEBS/rebate/loan are unavailable. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About SolarEdge

View Full Profile →

Years in AU Market15+ years

Local SupportNot verified

CEC-Listed Products2 models

15yr AU

CEC-approved products since 2011

15 years in the Australian market

Fault & error codes — SolarEdge SolarEdge Home Battery 48V

Extracted from the installation manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

Battery Cell malfunctioncriticalCall your installer
Manual (PDF)
One of the battery cells is not functioning correctly.
Likely cause
Internal cell damage or manufacturing defect.
What to do
Stop using the battery and contact installer.
Cell over voltagecriticalCall your installer
Manual (PDF)
One or more cells in the battery are over voltage.
Likely cause
Charging issues or faulty cells.
What to do
Stop charging immediately and check.
Module over voltagecriticalCall your installer
Manual (PDF)
The voltage of the module is too high.
Likely cause
External factors causing excessive voltage.
What to do
Check the voltage input and disconnect immediately.
Cell sampling faultwarning
Manual (PDF)
Failed to read cell status.
Likely cause
Communication or hardware failure.
What to do
Recheck connections.
Cell under voltagewarning
Manual (PDF)
One or more cells in the battery are under voltage.
Likely cause
Cells may be failing or deeply discharged.
What to do
Charge the battery and monitor.
Charging Over Currentwarning
Manual (PDF)
The current while charging exceeds the limit.
Likely cause
Incorrect settings or malfunctioning charger.
What to do
Check the charger settings and disconnect if necessary.
Communication failurewarning
Manual (PDF)
The battery is unable to communicate with the inverter.
Likely cause
Connection issues or faulty inverter.
What to do
Check communication cables and connections.
Discharge Over Currentwarning
Manual (PDF)
The current during discharge exceeds the limit.
Likely cause
Load is too high for the battery capacity.
What to do
Reduce connected load and check connections.
Module Under voltagewarning
Manual (PDF)
The voltage of the module is too low.
Likely cause
Battery may be deeply discharged.
What to do
Charge the battery and check the connections.
Temperature sensor malfunctionwarning
Manual (PDF)
The temperature sensor is not functioning properly.
Likely cause
Faulty sensor or connection issue.
What to do
Check the sensor connections.

Perth pricing

Typical installed price

$5,500

WA State RebateSubject to eligibility

Federal STCs-$0

After Rebates~$5,500

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the SolarEdge SolarEdge Home Battery 48V

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The SolarEdge BAT-05K48 against the closest-sized batteries from other brands.

Specification	SolarEdge BAT-05K48SolarEdge	CD Power CD-LP51100CD Power	Pylontech Pelio-L-5.12Pylontech

Usable capacity?	4.85 kWh	4.86 kWhbest value	4.86 kWhbest value
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	92%	92%	92%
Warranty	10 years	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

SolarEdge BAT-05K48

SolarEdge Home Battery 48V series

CEC Approved

View datasheet (PDF)

Part of SolarEdge Home Battery 48V — see all configurations

Usable capacity: 4.85 kWh
Round-trip efficiency: 92%
Warranty: 10 yr
Chemistry: LFP

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Cell & chemistry

Chemistry: LFP

Capacity & power

Nominal capacity: 5.12 kWh
Usable capacity: 4.85 kWh

Lifespan & degradation

Capacity retained at year 10: 80%
Warranted throughput: 4600 MWh

Physical

IP rating: IP65

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The SolarEdge Home Battery has a 10-year warranty covering defects and performance. It's void if not installed by accredited professionals or misused. Claims can be made via SolarEdge's support.

Duration

years

Throughput

4600

MWh

Max Temp

45°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Australian Office15 years in AU market

SolarEdge Australia

Direct manufacturer warranty. Australian consumer law applies.

Perth climate suitability

Suitable with precautions

Rated to 45°C. Plan for a shaded or garage install through Perth summers.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 92% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 45°C

✗ Non-transferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About SolarEdge

View Full Profile →

Years in AU Market15+ years

Local SupportNot verified

CEC-Listed Products2 models

15yr AU

CEC-approved products since 2011

15 years in the Australian market

Fault & error codes — SolarEdge SolarEdge Home Battery 48V

Extracted from the installation manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

Battery Cell malfunctioncriticalCall your installer
Manual (PDF)
One of the battery cells is not functioning correctly.
Likely cause
Internal cell damage or manufacturing defect.
What to do
Stop using the battery and contact installer.
Cell over voltagecriticalCall your installer
Manual (PDF)
One or more cells in the battery are over voltage.
Likely cause
Charging issues or faulty cells.
What to do
Stop charging immediately and check.
Module over voltagecriticalCall your installer
Manual (PDF)
The voltage of the module is too high.
Likely cause
External factors causing excessive voltage.
What to do
Check the voltage input and disconnect immediately.
Cell sampling faultwarning
Manual (PDF)
Failed to read cell status.
Likely cause
Communication or hardware failure.
What to do
Recheck connections.
Cell under voltagewarning
Manual (PDF)
One or more cells in the battery are under voltage.
Likely cause
Cells may be failing or deeply discharged.
What to do
Charge the battery and monitor.
Charging Over Currentwarning
Manual (PDF)
The current while charging exceeds the limit.
Likely cause
Incorrect settings or malfunctioning charger.
What to do
Check the charger settings and disconnect if necessary.
Communication failurewarning
Manual (PDF)
The battery is unable to communicate with the inverter.
Likely cause
Connection issues or faulty inverter.
What to do
Check communication cables and connections.
Discharge Over Currentwarning
Manual (PDF)
The current during discharge exceeds the limit.
Likely cause
Load is too high for the battery capacity.
What to do
Reduce connected load and check connections.
Module Under voltagewarning
Manual (PDF)
The voltage of the module is too low.
Likely cause
Battery may be deeply discharged.
What to do
Charge the battery and check the connections.
Temperature sensor malfunctionwarning
Manual (PDF)
The temperature sensor is not functioning properly.
Likely cause
Faulty sensor or connection issue.
What to do
Check the sensor connections.

Perth pricing

Typical installed price

$5,500

WA State RebateSubject to eligibility

Federal STCs-$0

After Rebates~$5,500

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the SolarEdge SolarEdge Home Battery 48V

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The SolarEdge BAT-05K48 against the closest-sized batteries from other brands.

Specification	SolarEdge BAT-05K48SolarEdge	CD Power CD-LP51100CD Power	Pylontech Pelio-L-5.12Pylontech

Usable capacity?	4.85 kWh	4.86 kWhbest value	4.86 kWhbest value
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	92%	92%	92%
Warranty	10 years	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

SolarEdge BAT-05K48

Full specifications

Cell & chemistry

Capacity & power

Lifespan & degradation

Physical

Australian support structure

Perth climate suitability

Key warranty terms

Fault & error codes — SolarEdge SolarEdge Home Battery 48V

How it compares

More from SolarEdge

SolarEdge Inverters

SolarEdge Solar Panels

Want to take the next step?

SolarEdge BAT-05K48

Full specifications

Cell & chemistry

Capacity & power

Lifespan & degradation

Physical

Australian support structure

Perth climate suitability

Key warranty terms

Fault & error codes — SolarEdge SolarEdge Home Battery 48V

How it compares

More from SolarEdge

SolarEdge Inverters

SolarEdge Solar Panels

Want to take the next step?