Battery inverter · SolarEdge · CEC approved September 2026
CEC listing: PCS050BA (AS4777-2 2020)
A 49.9 kW three-phase battery inverter.
Commercial-scale inverter
At 49.9 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the SolarEdge PCS050BA, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 0 mm |
| Side clearance | 0 mm |
| AC breaker | 80 A |
| Cable gauge | 25 mm² |
| DNSP pre-approval | No |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Website
www.solaredge.com/ausThe SolarEdge PCS050BA against the closest-power inverters from other brands.
| Specification | SolarEdge PCS050BASolarEdge | KSTAR KAC49.9DP2KSTAR | SolaX Power X3-AELIO-49.9KSolaX Power |
|---|---|---|---|
| Rated power? | 49.9 kW | 49.9 kW | 49.9 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Battery | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in workmanship and materials for 10 years. Exclusions include misuse and improper maintenance. To claim, report the defect via email within 10 days.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
SE50K (AS4777-2 2020)
50 kW · 3φ
SE33.3K (AS4777-2 2020)
33.3 kW · 3φ
SE66.6K (AS4777-2 2020)
66.6 kW · 3φ
SE30K (AS4777-2 2020)
30 kW · 3φ
SE25K (AS4777-2 2020)
25 kW · 3φ
SE17K (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from SolarEdge available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.