Batteries1 listed
- Approved models
- 1
- Usable capacity
- 3.3 kWh
- Chemistry
- LFP
SMA · manufacturer profile
SMA Home Storage and the Sunny Boy Smart Energy hybrid it runs on
Inverter manufacturer
Updated 3 November 2026 · Checked against SMA Australia's Home Storage datasheet and warranty, and its inverter datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
On the Australian register, SMA has solar inverters and one home battery, SMA Home Storage. The register lists it as one module, the HS-BM-3.28-10, with 3.28 kWh of usable LFP storage (lithium iron phosphate). SMA's Australian datasheet names the Sunny Boy Smart Energy hybrid as the SMA product it works with. The Australian warranty runs 10 years and promises 70% of the usable capacity. It holds only while the system stays registered in Sunny Portal and online each week. SMA Solar Technology AG in Germany gives the warranty. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The Sunny Boy Smart Energy SBSE3.6-50, SBSE4.0-50, SBSE5.0-50 and SBSE6.0-50 were on Synergy's list dated 30 October 2026. A Home Storage on one of them pairs with an inverter listed for battery storage on Synergy's list.
Specifications and pricing change. Confirm them with the manufacturer.
The company
SMA Solar Technology AG gives the Home Storage warranty. Its letterhead is in Niestetal, Germany. On the Australian register, SMA's inverters are listed under SMA Australia Pty Ltd.
The battery's current listing was approved on 31 July 2025 and runs until 31 December 2027. The current listings of the Sunny Boy Smart Energy hybrids it pairs with were approved on 14 February 2025 and run until February 2028. SMA's solar and battery inverters fill the rest of its listings.
A Home Storage claim goes to SMA Service online, at my.sma-service.com. Have the serial number, the inverter model and the start-up report ready. The warranty names no Australian phone line or office. Ask your installer who handles a service visit.
Most of SMA's register listings are inverters. The Clean Energy Council (CEC) register lists SMA inverters in several lines, and one SMA battery, SMA Home Storage. Its current listing was approved on 31 July 2025.
The warranty asks for a working internet link. The battery and its SMA inverter must stay registered in Sunny Portal and online for at least 10 hours in a row each week. Automatic updates must stay on for the software SMA counts as critical.
SMA has one battery on the Clean Energy Council (CEC) register, SMA Home Storage, and several lines of inverters. The Sunny Boy Smart Energy is the hybrid SMA's datasheet names for the battery. The Sunny Boy and Sunny Tripower are solar inverters, and the Sunny Island lines are battery inverters for on-grid and off-grid systems.
One registered module, 3.28 kWh usable. LFP (lithium iron phosphate) cells, 38 kg. IP65 (dust-tight and protected against water jets). Floor, wall or back to back
CEC approved
Single-phase hybrid with a fixed rating that pairs with a separate battery. 3 solar inputs, secure power supply, optional backup
CEC approved
Solar inverters: single-phase 3.0 to 6.0, three-phase 3.0 to 10.0, and three-phase 12 to 25 for large homes
On the CEC register, listing dates vary by model
Battery inverters for on-grid and off-grid systems. SMA's datasheet says the Sunny Island 4.4M is not approved for on-grid use in Australia and New Zealand
On the CEC register, listing dates vary by model
The register lists one Home Storage battery, the HS-BM-3.28-10 module, with 3.28 kWh of usable LFP storage. It lists no larger size. SMA's Australian datasheet and warranty list one to five modules, from 3.28 to 16.40 kWh. Its manual marks the Sunny Boy Smart Energy compatible with one to five, and its Australian product page says one to four. So ask the installer to confirm the module count in writing.
The module is 610 mm wide, 483 mm tall and 214.6 mm deep, and weighs 38 kg. It can stand on the floor, hang on a wall or go back to back. The cables come fitted, and the system sets itself up when it starts.
SMA prints a battery efficiency of 94.5%. With an SMA hybrid inverter, the battery can also black start, which means it can restart a backup supply when the grid is down.
SMA's Australian datasheet names one: the Sunny Boy Smart Energy. It is a standard single-phase hybrid, with a fixed inverter rating, that runs solar panels and pairs with a separate battery. Its own datasheet says it works with SMA Home Storage. The CEC register lists four sizes, the SBSE3.6-50, SBSE4.0-50, SBSE5.0-50 and SBSE6.0-50, approved on 14 February 2025.
Those four sizes have three solar inputs, each with its own tracker, so panels on different roof faces can each have their own input. The hybrid has a built-in secure power supply, which needs wiring made for Australia and New Zealand. Backup for the home is an option, through the SMA Backup 1P box. The hybrid is rated IP65 (dust-tight and protected against water jets) and weighs 17.5 kg.
The warranty excludes defects caused by an inverter SMA has not confirmed. For a three-phase home, SMA's operating manual lists the Sunny Tripower Smart Energy and the Sunny Tripower Hybrid X. SMA Australia's product page names the Smart Energy too. Neither is on the CEC register dated 16 November 2026 or Synergy's list dated 30 October 2026. So a three-phase pairing is SMA's to confirm in writing.
Home Storage uses LFP cells, and the module is rated IP65, dust-tight and protected against water jets. SMA says it can go outdoors. The datasheet lists the battery safety standard IEC 62619, the transport test UN38.3 and the German battery standard VDE 2510-50.
The warranty sets the site rules. The battery must stay out of direct sunlight, in a ventilated spot, away from fire and from heat sources above 60 °C. It charges between 0 and 50 °C and discharges between -10 and 50 °C.
SMA's Home Storage warranty for Australia and New Zealand covers purchases made after 14 July 2025. It runs 10 years from the day the battery is commissioned. It starts no later than a year after the module was made, or 180 days after SMA cycles a stored module, whichever is later. So a battery that sat in a warehouse can arrive with less than the full term. Ten years is also the term the federal energy department says many battery makers offer.
SMA promises at least 70% of the usable capacity for 120 months. That promise is tied to energy use. It holds up to an energy throughput of 4.6 MWh (megawatt-hours) for each kWh of usable capacity. The air around the battery must stay between -10 °C and 50 °C, at no more than 2,000 m above sea level.
Keeping the 10 years takes some effort. The system stays registered in Sunny Portal and online at least 10 hours in a row each week, with critical updates switched on. A qualified electrician installs it. A battery that stops running for six months must be charged in full and then run down to 30% at least once every six months.
Report a fault straight away. The warranty asks for a claim within 10 business days, and in other places it says 10 working days and 10 days. Only the original buyer who put the battery into service can claim, so the warranty does not pass to the next owner of the house. Australian consumer law rights sit beside it.
The warranty answer is 70% of the usable capacity for 120 months, within the energy limit above. Neither the datasheet nor the warranty prints a cycle count.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The Sunny Boy Smart Energy SBSE3.6-50, SBSE4.0-50, SBSE5.0-50 and SBSE6.0-50 were on Synergy's list dated 30 October 2026. A Home Storage on one of them pairs with an inverter listed for battery storage on Synergy's list.
Synergy's list names inverters, not batteries. A Home Storage battery counts through the Sunny Boy Smart Energy beside it, so the hybrid's code on the quote is the one that counts, and the list goes model by model. Our inverter library badges each model Synergy lists for the scheme.
SMA's inverters on Synergy's list are not yet marked activation-ready for a Synergy VPP program (list dated 30 October 2026). The WA scheme also asks the household to join a virtual power plant (VPP). A VPP lets a retailer draw on a group of home batteries at once. Synergy runs one called Battery Rewards, and a battery supplier can run its own. No SMA document we read names a VPP in WA, so ask the installer which one the system can join.
The other scheme rules are on our WA battery rebate page. Our Synergy approved products guide explains what the list covers.
SMA Home Storage is one 3.28 kWh LFP module (lithium iron phosphate) on the Clean Energy Council (CEC) register, beside an SMA Sunny Boy Smart Energy hybrid. It goes on the floor or a shaded wall, out of direct sun. The warranty holds only while the system stays online and registered in Sunny Portal. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The Sunny Boy Smart Energy SBSE3.6-50, SBSE4.0-50, SBSE5.0-50 and SBSE6.0-50 were on Synergy's list dated 30 October 2026. A Home Storage on one of them pairs with an inverter listed for battery storage on Synergy's list.
Ask for the Home Storage module count and the Sunny Boy Smart Energy hybrid, each by model code, and ask in writing what SMA supports. Plan for a steady internet link, and report any fault to SMA straight away.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 10 years, with 70% of usable capacity for 120 months up to an energy limit, while the system stays online in Sunny PortalSMA's Home Storage warranty for Australia and New Zealand (FW-Home-Storage-en-au-nz-12) |
|---|---|
| Batteries | LFP (lithium iron phosphate), 3.3 kWh usable |
| Approved now | 1 battery and 28 inverters on the CEC (Clean Energy Council) register |
| Local support | Yes, support handled through Australian channelsSource: Australian warranty, checked 14 Oct 2026Confirmed |
| Local warranty claims | Claims can be processed through Australian channelsConfirmed |
| CEC listings | 29 approved right now · 5 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
1 CEC-approved batteries
Grouped by series. Open a series for each variant, or a model for full specs.
28 CEC-approved inverters, 5 not currently listed · grouped into 21 series
STP 12-50 (AS4777-2 2020)
STP 125-70 (AS4777-2 2020)
STP 15-50 (AS4777-2 2020)
STP 20-50 (AS4777-2 2020)
STP 25-50 (AS4777-2 2020)
STP 110-60 (AS4777-2 2020)
STP 125-70 (AS4777-2 2020)
STP 50-41 (AS4777-2 2020)
Compatible batteries: BYD HVS 5.1, BYD HVS 7.7, BYD HVS 10.2, BYD HVS 12.8, BYD LVS 4.0-24.0, Dyness BX Tower
| Battery Model | BYD HVS 5.1 | BYD HVS 7.7 | BYD LVS 4.0-24.0 | Dyness BX Tower |
|---|---|---|---|---|
| Charge/Discharge (kW) | 3.7/3.7 | 3.7/3.7 | 3.7/3.7 | 3.7/3.7 |
| Battery Model | BYD HVS 5.1 | BYD HVS 7.7 | BYD LVS 4.0-24.0 | Dyness BX Tower |
|---|---|---|---|---|
| Charge/Discharge (kW) | 4.51/4.51 | 5/5 | 5/5 | 5/5 |
| Battery Model | BYD HVS 5.1 | BYD HVS 7.7 | BYD HVS 10.2 | BYD HVS 12.8 | BYD LVS 4.0-24.0 | Dyness BX Tower |
|---|---|---|---|---|---|---|
| Charge/Discharge (kW) | 4.51/4.51 | 6/6 | 6/6 | 6/6 | 6/6 | 6/6 |
Understanding Power Ratings:
* DC charge/discharge power varies from AC power due to inverter efficiency. Always consult with your installer for specific system design.
What has happened to SMA on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
⚡ 5 Inverter Models Listed
Inverter range expanded to 5 CEC-approved models.
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
SMA's Australian datasheet names the Sunny Boy Smart Energy, a single-phase hybrid. The CEC register lists the SBSE3.6-50, SBSE4.0-50, SBSE5.0-50 and SBSE6.0-50. The warranty excludes an inverter SMA has not confirmed, so ask for that in writing for any other pairing. The manual also lists three-phase models that are on neither the CEC register dated 16 November 2026 nor Synergy's list dated 30 October 2026.
The warranty promises at least 70% of the usable capacity for 120 months, up to 4.6 MWh of throughput for each kWh. The Australian warranty and datasheet print no cycle count.
Yes. The battery and its SMA inverter must stay registered in Sunny Portal and online at least 10 hours in a row each week, with critical updates switched on.
SMA says it can, and the module is rated IP65. The warranty rules out direct sunlight, and the battery charges only between 0 and 50 °C. So a shaded wall or a garage is the place for it.
The CEC register lists one module, the HS-BM-3.28-10, at 3.28 kWh usable. SMA's own documents allow up to five on the Sunny Boy Smart Energy, while its product page says four. Get the count for your system in writing.
SMA's home batteries use Compatible with BYD LFP, LG NMC cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 1 CEC-approved SMA battery model with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
SMA has 28 CEC-approved inverter models from 3-125 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.
Are you SMA?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.