Solar inverter · SMA · CEC approved August 2026
CEC listing: STP 15-50 (AS4777-2 2020)
A 15 kW three-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the SMA STP 15-50, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| European efficiency | 98.2% |
| Physical | |
| Weight | 35 kg |
| IP rating | IP65 |
| Installation requirements | |
| Cable gauge | 10 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.sma-australia.com.auThe SMA STP 15-50 against the closest-power inverters from other brands.
| Specification | Energizer Force 15.0HT+Energizer | Afore AF15K-THAfore | |
|---|---|---|---|
| Rated power? | 15 kW | 15 kW | 15 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 20 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers the Sunny Tripower X solar inverters for five years, ensuring they function correctly. Exclusions include non-accredited installations and modifications; to claim, contact the installer directly.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.
1001criticalCall your installerL/N swapped - Installation fault.
101criticalCall your installerGrid incident - Voltage too high.
102criticalCall your installerGrid incident - Voltage too high.
103criticalCall your installerGrid incident - Voltage too high.
105criticalCall your installerGrid incident - Voltage too high.
1101criticalCall your installerInstallation fault - Check connection.
301criticalCall your installerVoltage too high.
401criticalCall your installerGrid incident - Disconnected.
404criticalCall your installerGrid incident - Disconnected.
501criticalCall your installerGrid frequency not permitted.
302warningCall your installerTemperature AC voltage - Reduced power.
507warningCall your installerToo high grid frequency - Reduced power.
6001warningCall your installerExcess direct current detected.
STP 12-50 (AS4777-2 2020)
12 kW · 3φ
STP10.0-3AV-40 (AS4777-2 2020)
10 kW · 3φ
STP 20-50 (AS4777-2 2020)
20 kW · 3φ
STP8.0-3AV-40 (AS4777-2 2020)
8 kW · 3φ
STP6.0-3AV-40 (AS4777-2 2020)
6 kW · 3φ
STP5.0-3AV-40 (AS4777-2 2020)
5 kW · 3φ
Other CEC-approved products from SMA available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.