Solar inverter · SMA · CEC approved July 2024
CEC listing: STP10.0-3AV-40 (AS4777-2 2020)
A 10 kW three-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the SMA STP10.0-3AV-40, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 10 kW |
| Maximum power | 10 kW |
| Apparent power | 10 kVA |
| Phases | 3 |
| Efficiency | |
| Max efficiency | 98.3% |
| European efficiency | 98.4% |
| CEC-weighted efficiency | 98.3% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 1000 V |
| MPPT voltage min | 320 V |
| MPPT voltage max | 800 V |
| Max input current | 14.5 A |
| Battery & backup | |
| Battery compatible | No |
| Backup capable | No |
| Continuous backup | 10 kW |
| Physical | |
| Dimensions (H×W×D) | 497 × 460 × 176 mm |
| Weight | 96 kg |
| IP rating | IP65 |
| Cooling | convection |
| Operating temperature | 25°C to 60°C |
| Installation requirements | |
| Top clearance | 0 mm |
| Side clearance | 0 mm |
| Earthing method | / |
| DNSP pre-approval | No |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.sma-australia.com.auThe SMA STP10.0-3AV-40 against the closest-power inverters from other brands.
| Specification | Energizer Force 10.0HS+Energizer | Energizer Force 10.0HT+Energizer | |
|---|---|---|---|
| Rated power? | 10 kW | 10 kW | 10 kW |
| Max efficiency? | 98.3% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The Sunny Tripower 125 comes with a 5-year warranty covering defects. It can be extended, but non-accredited installations void the warranty. To claim, contact customer service.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 3 of 3. The official install manual is the authoritative source — always confirm before acting.
E001criticalCall your installerEarth fault detected
E002warningCommunication failure
E003warningOver temperature warning
STP8.0-3AV-40 (AS4777-2 2020)
8 kW · 3φ
STP 12-50 (AS4777-2 2020)
12 kW · 3φ
STP6.0-3AV-40 (AS4777-2 2020)
6 kW · 3φ
STP5.0-3AV-40 (AS4777-2 2020)
5 kW · 3φ
STP 15-50 (AS4777-2 2020)
15 kW · 3φ
STP4.0-3AV-40 (AS4777-2 2020)
4 kW · 3φ
Other CEC-approved products from SMA available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.