Loading Solar Battery Perth...

Hybrid inverter · Energizer · Force HT+ Series series · CEC approved February 2026

Energizer Force 15.0HT+

CEC listing: Force 15.0HT+ (AS4777-2 2020)

A 15 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$7,125; Estimate for the inverter alone — your quote will vary
Rated power: 15kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Force HT+ Series series

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 15kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long 8 Star Energy Pty Ltd stands behind it: 3yr

Full datasheet

Every figure on file for the Energizer Force 15.0HT+, by section.

Full datasheet, by section
Specification	Value
Installation requirements
Top clearance	0 mm
Side clearance	0 mm
Earthing method	.
DNSP pre-approval	Yes

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

25 Feb 2026

Approval expiry

25 Feb 2029

Status

Active

Eligible for rebates

Yes

About 8 Star Energy Pty Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$5,250–$9,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 63.8 kWh
Annual yield: 23,269 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Energizer Force 15.0HT+ against the closest-power inverters from other brands.

Specification	Energizer Force 15.0HT+Energizer	Afore New Energy Technology AF15K-THAfore New Energy Technology	Solplanet ASW15K-LT-G2-ASolplanet

Rated power?	15 kW	15 kW	15 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Three-phase	Three-phase
Type	Hybrid	Hybrid	Solar
Battery ready	Yes	Yes	No
Warranty	3 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

3-year inverter warranty

Energizer Force 15.0HT+

This warranty covers 3 years for defective parts, excluding modifications or non-accredited installs. To claim, contact support for assistance.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Non-accredited installation, modification, or tampering will void warranty.
Environment limits: None specified

Read the official warranty document (PDF)

Fault & error codes — Energizer Force 15.0HT+

From the install manual

18 documented

Showing 18 of 18. The official install manual is the authoritative source — always confirm before acting.

E0criticalCall your installer
Manual (PDF)
PV overvoltage protection
Likely cause
Mismatch between PV input and device parameters
What to do
Please make sure that the input parameters of PV meet the requirements of equipment parameters.
E3criticalCall your installer
Manual (PDF)
AC overvoltage/undervoltage protection
Likely cause
Wrong choice of grid standards
What to do
Ensure that the power grid standard is correct.
E4criticalCall your installer
Manual (PDF)
AC over-frequency and under-frequency protection
Likely cause
Wrong choice of grid standards
What to do
Ensure that the grid standard is selected correctly.
F3criticalCall your installer
Manual (PDF)
Unrecoverable System Failures
Likely cause
False alarm or abnormal self-test
What to do
Restart and reconfirm and contact the manufacturer for confirmation if the fault cannot be solved.
F4criticalCall your installer
Manual (PDF)
Unrecoverable Critical Failures
Likely cause
The battery is damaged or the battery type is wrong or the installation connection is unreliable.
What to do
Please contact the manufacturer for confirmation.
E1warning
Manual (PDF)
Battery voltage overrun
Likely cause
The number of batteries exceeds the upper limit of equipment support.
What to do
Confirm the equipment specifications and the maximum number of batteries to be connected, and reasonably configure the number of batteries.
E2warningCall your installer
Manual (PDF)
Battery not connected
Likely cause
Battery not installed in energy storage system
What to do
The whole energy storage system must be used together with batteries, otherwise the system itself does not meet the IP rating.
FEwarning
Manual (PDF)
Prolonged network failure
Likely cause
FH3X energy storage system needs to be connected to the network, if the network is disconnected for a long time or not connected to the network, the system will not be able to be used.
What to do
Perform network operation to maintain stable network usage.
FFwarning
Manual (PDF)
WIFI collector communication failure
Likely cause
Abnormal communication between storage system and collector
What to do
Restart and reconfirm, and contact the manufacturer for confirmation if the fault cannot be solved.
L0warning
Manual (PDF)
Overheating
Likely cause
The system charges and discharges the battery with high power for a long time
What to do
Reduce the load or stop charging and discharging the battery, and use the energy storage system reasonably.
L1warning
Manual (PDF)
Under-temperature
Likely cause
System ambient temperature is too low
What to do
External physical heating of the energy storage system
L2warning
Manual (PDF)
Overvoltage
Likely cause
Battery system false alarm
What to do
Restart the system to reconfirm
L3warning
Manual (PDF)
Undervoltage
Likely cause
Off-grid operation, excessive standby time
What to do
Set the cut-off SOC reasonably, and recharge the battery in time
L4warningCall your installer
Manual (PDF)
Sleep
Likely cause
Grid-connected operation, battery failure resulting in severe battery undervoltage
What to do
Contact the manufacturer for any unrecoverable faults in the system operation
L5warning
Manual (PDF)
Charge overcurrent
Likely cause
Battery system false alarm
What to do
Restart the system to reconfirm
L6warning
Manual (PDF)
Discharge overcurrent
Likely cause
Load overrun
What to do
Set the load appropriately.
E5info
Manual (PDF)
Abnormal heat dissipation of the system
Likely cause
Ensure that there is room for heat dissipation in the controller heat sink,and the installation environment is well ventilated as much as possible.
What to do
Avoid direct sunlight on the installation location of the energy storage system.
F2info
Manual (PDF)
Other routine failures that can be recovered
Likely cause
False alarms or communication abnormalities
What to do
Wait for recovery or restart and contact the manufacturer for confirmation if the fault cannot be solved.

Part of the Energizer Force HT+ Series series

Compare every Energizer Force HT+ Series variant side by side →

More 8 Star Energy Pty Ltd Inverters

Force 10.0HS+ (AS4777-2 2020)

10 kW · 1φ

Force 10.0HT+ (AS4777-2 2020)

10 kW · 3φ

Force 10.0S (AS4777-2 2020)

10 kW · 1φ

Force 10.5HS+ (AS4777-2 2020)

10.5 kW · 1φ

Force 10.5S (AS4777-2 2020)

10.5 kW · 1φ

Force 12.0HT+ (AS4777-2 2020)

12 kW · 3φ

View all 8 Star Energy Pty Ltd inverters

More from 8 Star Energy Pty Ltd

Other CEC-approved products from 8 Star Energy Pty Ltd available in Australia.

8 Star Energy Pty Ltd Batteries

PS2900H-2

5.76 kWh · LFP

PS2900H-3

8.64 kWh · LFP

PS2900H-4

11.52 kWh · LFP

PS2900H-5

14.4 kWh · LFP

PS2900H-6

17.28 kWh · LFP

PS2900H-7

20.16 kWh · LFP

View all 8 Star Energy Pty Ltd batteries

8 Star Energy Pty Ltd Solar Panels

ENSP48NDG3440BF (IEC 61215-2021)

440W · 22.5% · Mono PERC

ENSP48NDG3440BL (IEC 61215-2021)

440W · 22.5% · Mono PERC

ENSP48NDG3445BF (IEC 61215-2021)

445W · 22.8% · Mono PERC

ENSP48NDG3445BL (IEC 61215-2021)

445W · 22.8% · Mono PERC

ENSP48NDG3450BF (IEC 61215-2021)

450W · 23.0% · Mono PERC

ENSP48NDG3450BL (IEC 61215-2021)

450W · 23.0% · Mono PERC

View all 8 Star Energy Pty Ltd panels

View full 8 Star Energy Pty Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Energizer · Force HT+ Series series · CEC approved February 2026

Energizer Force 15.0HT+

CEC listing: Force 15.0HT+ (AS4777-2 2020)

A 15 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$7,125; Estimate for the inverter alone — your quote will vary
Rated power: 15kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Force HT+ Series series

Spotted something outdated?

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 15kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long 8 Star Energy Pty Ltd stands behind it: 3yr

Full datasheet

Every figure on file for the Energizer Force 15.0HT+, by section.

Full datasheet, by section
Specification	Value
Installation requirements
Top clearance	0 mm
Side clearance	0 mm
Earthing method	.
DNSP pre-approval	Yes

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

25 Feb 2026

Approval expiry

25 Feb 2029

Status

Active

Eligible for rebates

Yes

About 8 Star Energy Pty Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$5,250–$9,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 63.8 kWh
Annual yield: 23,269 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Energizer Force 15.0HT+ against the closest-power inverters from other brands.

Specification	Energizer Force 15.0HT+Energizer	Afore New Energy Technology AF15K-THAfore New Energy Technology	Solplanet ASW15K-LT-G2-ASolplanet

Rated power?	15 kW	15 kW	15 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Three-phase	Three-phase
Type	Hybrid	Hybrid	Solar
Battery ready	Yes	Yes	No
Warranty	3 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

3-year inverter warranty

Energizer Force 15.0HT+

This warranty covers 3 years for defective parts, excluding modifications or non-accredited installs. To claim, contact support for assistance.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Non-accredited installation, modification, or tampering will void warranty.
Environment limits: None specified

Read the official warranty document (PDF)

Fault & error codes — Energizer Force 15.0HT+

From the install manual

18 documented

Showing 18 of 18. The official install manual is the authoritative source — always confirm before acting.

E0criticalCall your installer
Manual (PDF)
PV overvoltage protection
Likely cause
Mismatch between PV input and device parameters
What to do
Please make sure that the input parameters of PV meet the requirements of equipment parameters.
E3criticalCall your installer
Manual (PDF)
AC overvoltage/undervoltage protection
Likely cause
Wrong choice of grid standards
What to do
Ensure that the power grid standard is correct.
E4criticalCall your installer
Manual (PDF)
AC over-frequency and under-frequency protection
Likely cause
Wrong choice of grid standards
What to do
Ensure that the grid standard is selected correctly.
F3criticalCall your installer
Manual (PDF)
Unrecoverable System Failures
Likely cause
False alarm or abnormal self-test
What to do
Restart and reconfirm and contact the manufacturer for confirmation if the fault cannot be solved.
F4criticalCall your installer
Manual (PDF)
Unrecoverable Critical Failures
Likely cause
The battery is damaged or the battery type is wrong or the installation connection is unreliable.
What to do
Please contact the manufacturer for confirmation.
E1warning
Manual (PDF)
Battery voltage overrun
Likely cause
The number of batteries exceeds the upper limit of equipment support.
What to do
Confirm the equipment specifications and the maximum number of batteries to be connected, and reasonably configure the number of batteries.
E2warningCall your installer
Manual (PDF)
Battery not connected
Likely cause
Battery not installed in energy storage system
What to do
The whole energy storage system must be used together with batteries, otherwise the system itself does not meet the IP rating.
FEwarning
Manual (PDF)
Prolonged network failure
Likely cause
FH3X energy storage system needs to be connected to the network, if the network is disconnected for a long time or not connected to the network, the system will not be able to be used.
What to do
Perform network operation to maintain stable network usage.
FFwarning
Manual (PDF)
WIFI collector communication failure
Likely cause
Abnormal communication between storage system and collector
What to do
Restart and reconfirm, and contact the manufacturer for confirmation if the fault cannot be solved.
L0warning
Manual (PDF)
Overheating
Likely cause
The system charges and discharges the battery with high power for a long time
What to do
Reduce the load or stop charging and discharging the battery, and use the energy storage system reasonably.
L1warning
Manual (PDF)
Under-temperature
Likely cause
System ambient temperature is too low
What to do
External physical heating of the energy storage system
L2warning
Manual (PDF)
Overvoltage
Likely cause
Battery system false alarm
What to do
Restart the system to reconfirm
L3warning
Manual (PDF)
Undervoltage
Likely cause
Off-grid operation, excessive standby time
What to do
Set the cut-off SOC reasonably, and recharge the battery in time
L4warningCall your installer
Manual (PDF)
Sleep
Likely cause
Grid-connected operation, battery failure resulting in severe battery undervoltage
What to do
Contact the manufacturer for any unrecoverable faults in the system operation
L5warning
Manual (PDF)
Charge overcurrent
Likely cause
Battery system false alarm
What to do
Restart the system to reconfirm
L6warning
Manual (PDF)
Discharge overcurrent
Likely cause
Load overrun
What to do
Set the load appropriately.
E5info
Manual (PDF)
Abnormal heat dissipation of the system
Likely cause
Ensure that there is room for heat dissipation in the controller heat sink,and the installation environment is well ventilated as much as possible.
What to do
Avoid direct sunlight on the installation location of the energy storage system.
F2info
Manual (PDF)
Other routine failures that can be recovered
Likely cause
False alarms or communication abnormalities
What to do
Wait for recovery or restart and contact the manufacturer for confirmation if the fault cannot be solved.

Part of the Energizer Force HT+ Series series

Compare every Energizer Force HT+ Series variant side by side →

More 8 Star Energy Pty Ltd Inverters

Force 10.0HS+ (AS4777-2 2020)

10 kW · 1φ

Force 10.0HT+ (AS4777-2 2020)

10 kW · 3φ

Force 10.0S (AS4777-2 2020)

10 kW · 1φ

Force 10.5HS+ (AS4777-2 2020)

10.5 kW · 1φ

Force 10.5S (AS4777-2 2020)

10.5 kW · 1φ

Force 12.0HT+ (AS4777-2 2020)

12 kW · 3φ

View all 8 Star Energy Pty Ltd inverters