Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · SMA · Sunny Tripower series · CEC approval expired
CEC listing: STP 110-60 (AS4777-2 2020)
A 110 kW single-phase solar inverter.
Commercial-scale inverter
At 110 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar only
Every figure on file for the SMA STP 110-60, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Maximum power | 5 kW |
| Apparent power | 5 kVA |
| Phases | 3 |
| Efficiency | |
| Max efficiency | 98.6% |
| European efficiency | 98.4% |
| CEC-weighted efficiency | 98.3% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 1000 V |
| MPPT voltage min | 80 V |
| MPPT voltage max | 800 V |
| Max input current | 60 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | No |
| Continuous backup | 5 kW |
| Physical | |
| Dimensions (H×W×D) | 450 × 500 × 215 mm |
| Weight | 96 kg |
| IP rating | IP65 |
| Cooling | Forced ventilation |
| Operating temperature | 25°C to 60°C |
| Installation requirements | |
| Top clearance | 0 mm |
| Side clearance | 0 mm |
| Earthing method | / |
| DNSP pre-approval | No |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
No
Backup capable
No
CEC approved
22 July 2022
Approval expiry
22 Jan 2026
Status
Not listed
Eligible for rebates
No (not listed)
Years in AU Market
20 years
Australian Office
Yes
CEC-Approved Batteries
1
CEC-Approved Panels
0
Category
Mid-Tier
Typical installed, inverter only
$24,200–$48,400
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Australian office
Has local presence
Website
www.sma-australia.com.auThe SMA STP 110-60 against the closest-power inverters from other brands.
| Specification | Solplanet ASW110K-LTSolplanet | Solis S5-GC110K-AUSolis | |
|---|---|---|---|
| Rated power? | 110 kW | 110 kW | 110 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Three-phase | Three-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | Not verified | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Warranty summary
The Sunny Tripower 125 comes with a 5-year warranty covering defects. It can be extended, but non-accredited installations void the warranty. To claim, contact customer service.
The Sunny Tripower 125 comes with a 5-year warranty covering defects. It can be extended, but non-accredited installations void the warranty. To claim, contact customer service.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 3 of 3. The official install manual is the authoritative source — always confirm before acting.
E001criticalCall your installerEarth fault detected
E002warningCommunication failure
E003warningOver temperature warning
Part of the SMA Sunny Tripower series
Compare every SMA Sunny Tripower variant side by side →
SB1.5-1VL-40 (AS4777-2 2020)
1.5 kW · 1φ
SB2.5-1VL-40 (AS4777-2 2020)
2.5 kW · 1φ
SB3.0-1AV-41 (AS4777-2 2020)
3 kW · 1φ
SB4.0-1AV-41 (AS4777-2 2020)
4 kW · 1φ
SB5.0-1AV-41 (AS4777-2 2020)
5 kW · 1φ
SB6.0-1AV-41 (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from SMA available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.