Loading Solar Battery Perth...

Hybrid inverter · HopeTrek Innovations Co Ltd · TH-A series · CEC approved September 2026

HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

An 8 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole TH-A series

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long HopeTrek Innovations Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020), by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP66
Installation requirements
Top clearance	500 mm
Side clearance	250 mm
AC breaker	10 A
Cable gauge	1.5 mm²
Earthing method	Permanent grounded wiring system
DNSP pre-approval	No
Estimated install time	2 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

15 Sept 2026

Approval expiry

15 Sept 2029

Status

Active

Eligible for rebates

Yes

About HopeTrek Innovations Co Ltd

Years in AU Market

—

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

0 years in Australian market

How it compares

The HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020) against the closest-power inverters from other brands.

Specification	HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)HopeTrek Innovations Co Ltd	Energizer Force 8.0HS+ (AS4777-2 2020)Energizer	Energizer Force 8.0HT+ (AS4777-2 2020)Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

This warranty covers defects for 10 years, allowing 80% capacity at year 10. Warranty void if installation is non-accredited. Claims can be made via phone or email.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Pro-rata — value reduces with age
If you sell the home: Transfers to the next homeowner
What voids it: Non-accredited installations, modifications, tampering void warranty
Environment limits: None specified

Read the official warranty document (PDF)

Fault & error codes — HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

From the install manual

9 documented

Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.

05criticalCall your installer
Manual (PDF)
Output short circuited or over temperature detected
Likely cause
Temperature of internal converter components is over load or wiring issue.
What to do
Check wiring and remove abnormal loads.
06criticalCall your installer
Manual (PDF)
Output voltage is abnormal
Likely cause
Inverter voltage is below 190Vac or above 260Vac.
What to do
Reduce the connected load and check for faults.
07critical
Manual (PDF)
Overload timeout
Likely cause
The inverter is overloaded (105% load and time is up).
What to do
Reduce the connected load by switching off some equipment.
08criticalCall your installer
Manual (PDF)
Bus voltage is too high
Likely cause
Internal components may have failed.
What to do
Return to repair center.
09criticalCall your installer
Manual (PDF)
Bus soft start failed
Likely cause
Internal components may have failed.
What to do
Return to repair center.
02warning
Manual (PDF)
Over temperature
Likely cause
Temperature of inverter inside is high.
What to do
Remove the loads and reduce the operation environment temperature.
03warningCall your installer
Manual (PDF)
Battery voltage is too high
Likely cause
The battery voltage is too high.
What to do
Check if spec and quantity of batteries meet requirements.
04warningCall your installer
Manual (PDF)
Battery voltage is too low
Likely cause
Battery voltage is too low (<1.91V/Cell).
What to do
Recharge battery or replace battery.
12warningCall your installer
Manual (PDF)
NTC temperature sensor failure
Likely cause
NTC temperature sensor on the heatsink is failed.
What to do
Return to repair center.

Part of the HopeTrek Innovations Co Ltd TH-A series

Compare every HopeTrek Innovations Co Ltd TH-A variant side by side →

More HopeTrek Innovations Co Ltd Inverters

SUN-SL-HP5K-A2 (AS4777-2 2020)

5 kW · 1φ

SUN-SL-HP6K-A2 (AS4777-2 2020)

6 kW · 1φ

SUN-TH-HP10K-A2 (AS4777-2 2020)

10 kW · 3φ

SUN-TH-HP12K-A2 (AS4777-2 2020)

12 kW · 3φ

View all HopeTrek Innovations Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area — you choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · HopeTrek Innovations Co Ltd · TH-A series · CEC approved September 2026

HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

An 8 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole TH-A series

Spotted something outdated?

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long HopeTrek Innovations Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020), by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP66
Installation requirements
Top clearance	500 mm
Side clearance	250 mm
AC breaker	10 A
Cable gauge	1.5 mm²
Earthing method	Permanent grounded wiring system
DNSP pre-approval	No
Estimated install time	2 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

15 Sept 2026

Approval expiry

15 Sept 2029

Status

Active

Eligible for rebates

Yes

About HopeTrek Innovations Co Ltd

Years in AU Market

—

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

0 years in Australian market

How it compares

The HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020) against the closest-power inverters from other brands.

Specification	HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)HopeTrek Innovations Co Ltd	Energizer Force 8.0HS+ (AS4777-2 2020)Energizer	Energizer Force 8.0HT+ (AS4777-2 2020)Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

This warranty covers defects for 10 years, allowing 80% capacity at year 10. Warranty void if installation is non-accredited. Claims can be made via phone or email.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Pro-rata — value reduces with age
If you sell the home: Transfers to the next homeowner
What voids it: Non-accredited installations, modifications, tampering void warranty
Environment limits: None specified

Read the official warranty document (PDF)

Fault & error codes — HopeTrek Innovations Co Ltd SUN-TH-HP8K-A2 (AS4777-2 2020)

From the install manual

9 documented

Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.

05criticalCall your installer
Manual (PDF)
Output short circuited or over temperature detected
Likely cause
Temperature of internal converter components is over load or wiring issue.
What to do
Check wiring and remove abnormal loads.
06criticalCall your installer
Manual (PDF)
Output voltage is abnormal
Likely cause
Inverter voltage is below 190Vac or above 260Vac.
What to do
Reduce the connected load and check for faults.
07critical
Manual (PDF)
Overload timeout
Likely cause
The inverter is overloaded (105% load and time is up).
What to do
Reduce the connected load by switching off some equipment.
08criticalCall your installer
Manual (PDF)
Bus voltage is too high
Likely cause
Internal components may have failed.
What to do
Return to repair center.
09criticalCall your installer
Manual (PDF)
Bus soft start failed
Likely cause
Internal components may have failed.
What to do
Return to repair center.
02warning
Manual (PDF)
Over temperature
Likely cause
Temperature of inverter inside is high.
What to do
Remove the loads and reduce the operation environment temperature.
03warningCall your installer
Manual (PDF)
Battery voltage is too high
Likely cause
The battery voltage is too high.
What to do
Check if spec and quantity of batteries meet requirements.
04warningCall your installer
Manual (PDF)
Battery voltage is too low
Likely cause
Battery voltage is too low (<1.91V/Cell).
What to do
Recharge battery or replace battery.
12warningCall your installer
Manual (PDF)
NTC temperature sensor failure
Likely cause
NTC temperature sensor on the heatsink is failed.
What to do
Return to repair center.

Part of the HopeTrek Innovations Co Ltd TH-A series

Compare every HopeTrek Innovations Co Ltd TH-A variant side by side →

More HopeTrek Innovations Co Ltd Inverters

SUN-SL-HP5K-A2 (AS4777-2 2020)

5 kW · 1φ

SUN-SL-HP6K-A2 (AS4777-2 2020)

6 kW · 1φ

SUN-TH-HP10K-A2 (AS4777-2 2020)

10 kW · 3φ

SUN-TH-HP12K-A2 (AS4777-2 2020)

12 kW · 3φ

View all HopeTrek Innovations Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area — you choose whether to act on it. No obligation.

About this data