Loading Solar Battery Perth...

Hybrid inverter · Hiconics Eco-energy Drive Technology Co Ltd · Power X1 series · CEC approved September 2026

Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

A 30 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$14,250; Estimate for the inverter alone — your quote will vary
Rated power: 30kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Power X1 series

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 30kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Hiconics Eco-energy Drive Technology Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020), by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP65
Installation requirements
Top clearance	500 mm
Side clearance	300 mm
AC breaker	50 A
Cable gauge	6 mm²
Earthing method	TN-S
DNSP pre-approval	Yes
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

16 Sept 2026

Approval expiry

16 Sept 2029

Status

Active

Eligible for rebates

Yes

About Hiconics Eco-energy Drive Technology Co Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$10,500–$18,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

3 years in Australian market

How it compares

The Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020) against the closest-power inverters from other brands.

Specification	Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)Hiconics Eco-energy Drive Technology Co Ltd	Afore New Energy Technology (shanghai) AF30K-TH (AS4777-2 2020)Afore New Energy Technology (shanghai)	Alpha ESS M30-INV-AU (AS4777-2 2020)Alpha ESS

Rated power?	30 kW	30 kW	30 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Three-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

HYXiPOWER warrants that products are covered for up to 25 years depending on the model. Major exclusions include improper installation and unauthorized repairs. Claims must be reported within 14 days.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Non-accredited installation, unauthorized repairs, damage due to negligence or improper use, using products for demonstration purposes.
Environment limits: Operating temperature must be between -10~50°C; warranty void if exceeded.

Read the official warranty document (PDF)

Fault & error codes — Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

From the install manual

20 documented

Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.

IE016criticalCall your installer
Manual (PDF)
EPS Overload Fault
Likely cause
EPS overload fault.
What to do
Shutdown high-power device and press the 'ESC' key to restart the inverter. Or ask the installer for help.
IE017criticalCall your installer
Manual (PDF)
OverLoad Fault
Likely cause
On-grid mode overload
What to do
Shutdown high-power device and press the 'ESC' key to restart the inverter. Or ask the installer for help.
IE001warningCall your installer
Manual (PDF)
TZ Protect Fault
Likely cause
Overcurrent fault.
What to do
Wait for a while to check if you're back to normal. Disconnect PV+ PV- and batteries, reconnect.
IE002warningCall your installer
Manual (PDF)
Grid Lost Fault
Likely cause
Grid input voltage out of normal range.
What to do
Check grid input voltage if it's within normal. Or ask the installer for help.
IE003warningCall your installer
Manual (PDF)
Grid Volt Fault
Likely cause
Power grid voltage overrun.
What to do
Wait a moment, if the utility returns to normal, the system will reconnect. Please check if the grid voltage is within normal range. Or ask the installer for help.
IE004warningCall your installer
Manual (PDF)
Grid Freq Fault
Likely cause
Electricity frequency beyond range.
What to do
If the utility returns to normal, the system will reconnect. Or ask the installer for help.
IE005warningCall your installer
Manual (PDF)
PV Volt Fault
Likely cause
PV voltage out of range.
What to do
Check the output voltage of the PV panel. Or ask the installer for help.
IE006warningCall your installer
Manual (PDF)
Bus Volt Fault
Likely cause
Bus voltage fault.
What to do
Press the 'ESC' key to restart the inverter. Check that the PV input open circuit voltage is in the normal range. Or ask the installer for help.
IE007warningCall your installer
Manual (PDF)
Bat Volt Fault
Likely cause
Battery voltage fault.
What to do
Check battery input voltage if it's within normal range. Or ask the installer for help.
IE008warningCall your installer
Manual (PDF)
AC10M Volt Fault
Likely cause
Grid voltage out of range in the last 10 minutes.
What to do
The system will return to normal if the grid returns to normal. Or ask the installer for help.
IE009warningCall your installer
Manual (PDF)
DCI OCP Fault
Likely cause
DCI overcurrent protection fault.
What to do
Wait for a while to check if it's back to normal. Or ask the installer for help.
IE010warningCall your installer
Manual (PDF)
DCV OVP Fault
Likely cause
DCV EPS overvoltage protection failure.
What to do
Wait for a while to check if it's back to normal. Or ask the installer for help.
IE011warningCall your installer
Manual (PDF)
SW OCP Fault
Likely cause
Software Detection of Overcurrent Fault.
What to do
Wait for a while to check if it's back to normal. Shut down photovoltaic, battery, and grid connections. Or ask the installer for help.
IE012warningCall your installer
Manual (PDF)
RC OCP Fault
Likely cause
Overcurrent protection fault.
What to do
Check the impedance of DC input and AC output. Wait for a while to check if it's back to normal. Or ask the installer for help.
IE013warningCall your installer
Manual (PDF)
Isolation Fault
Likely cause
Insulation Fault.
What to do
Please check the wire insulation for damage. Wait for a while to check if it’s back to normal. Or ask the installer for help.
IE014warningCall your installer
Manual (PDF)
Temp Over Fault
Likely cause
Temperature beyond limit.
What to do
Check if ambient temperature exceeds the limit. Or ask the installer for help.
IE015warningCall your installer
Manual (PDF)
Bat Power Low
Likely cause
Battery power is low.
What to do
Close the high-power device and press the 'ESC' key to restart the inverter. Please charge the battery to a level higher than the protection capacity or protection voltage.
IE018warningCall your installer
Manual (PDF)
BMS Lost
Likely cause
Battery communication loss.
What to do
Check that the communication lines between the battery and the inverter are properly connected. Or ask the installer for help.
IE019warningCall your installer
Manual (PDF)
Fan Fault
Likely cause
Fan Fault.
What to do
Check for any foreign matter that may have caused the fan not to function properly. Or ask the installer for help.
IE020warningCall your installer
Manual (PDF)
Low Temp
Likely cause
Low temperature fault.
What to do
Check if the ambient temperature is too low. Or ask the installer for help.

Part of the Hiconics Eco-energy Drive Technology Co Ltd Power X1 series

Compare every Hiconics Eco-energy Drive Technology Co Ltd Power X1 variant side by side →

More Hiconics Eco-energy Drive Technology Co Ltd Inverters

HEC-S 3K (AS4777-2 2020)

3.68 kW · 1φ

HEC-S 5K (AS4777-2 2020)

4.999 kW · 1φ

HEC2-S3.8Hr2 (AS4777-2 2020)

3.8 kW · 1φ

HEC2-S5.0Hr2 (AS4777-2 2020)

5 kW · 1φ

HEC2-S6.0Hr2 (AS4777-2 2020)

6 kW · 1φ

MD-HI3.8-SHO (AS4777-2 2020)

3.8 kW · 1φ

View all Hiconics Eco-energy Drive Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area — you choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Hiconics Eco-energy Drive Technology Co Ltd · Power X1 series · CEC approved September 2026

Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

A 30 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$14,250; Estimate for the inverter alone — your quote will vary
Rated power: 30kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Power X1 series

Spotted something outdated?

What we can tell you

Read from the figures on this page — no review written yet

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 30kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Hiconics Eco-energy Drive Technology Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020), by section.

Full datasheet, by section
Specification	Value
Physical
IP rating	IP65
Installation requirements
Top clearance	500 mm
Side clearance	300 mm
AC breaker	50 A
Cable gauge	6 mm²
Earthing method	TN-S
DNSP pre-approval	Yes
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

16 Sept 2026

Approval expiry

16 Sept 2029

Status

Active

Eligible for rebates

Yes

About Hiconics Eco-energy Drive Technology Co Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$10,500–$18,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

3 years in Australian market

How it compares

The Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020) against the closest-power inverters from other brands.

Specification	Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)Hiconics Eco-energy Drive Technology Co Ltd	Afore New Energy Technology (shanghai) AF30K-TH (AS4777-2 2020)Afore New Energy Technology (shanghai)	Alpha ESS M30-INV-AU (AS4777-2 2020)Alpha ESS

Rated power?	30 kW	30 kW	30 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Three-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Non-accredited installation, unauthorized repairs, damage due to negligence or improper use, using products for demonstration purposes.
Environment limits: Operating temperature must be between -10~50°C; warranty void if exceeded.

Read the official warranty document (PDF)

Fault & error codes — Hiconics Eco-energy Drive Technology Co Ltd MH-HYIV30.0-TH-AU (AS4777-2 2020)

From the install manual

20 documented

Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.

IE016criticalCall your installer
Manual (PDF)
EPS Overload Fault
Likely cause
EPS overload fault.
What to do
Shutdown high-power device and press the 'ESC' key to restart the inverter. Or ask the installer for help.
IE017criticalCall your installer
Manual (PDF)
OverLoad Fault
Likely cause
On-grid mode overload
What to do
Shutdown high-power device and press the 'ESC' key to restart the inverter. Or ask the installer for help.
IE001warningCall your installer
Manual (PDF)
TZ Protect Fault
Likely cause
Overcurrent fault.
What to do
Wait for a while to check if you're back to normal. Disconnect PV+ PV- and batteries, reconnect.
IE002warningCall your installer
Manual (PDF)
Grid Lost Fault
Likely cause
Grid input voltage out of normal range.
What to do
Check grid input voltage if it's within normal. Or ask the installer for help.
IE003warningCall your installer
Manual (PDF)
Grid Volt Fault
Likely cause
Power grid voltage overrun.
What to do
Wait a moment, if the utility returns to normal, the system will reconnect. Please check if the grid voltage is within normal range. Or ask the installer for help.
IE004warningCall your installer
Manual (PDF)
Grid Freq Fault
Likely cause
Electricity frequency beyond range.
What to do
If the utility returns to normal, the system will reconnect. Or ask the installer for help.
IE005warningCall your installer
Manual (PDF)
PV Volt Fault
Likely cause
PV voltage out of range.
What to do
Check the output voltage of the PV panel. Or ask the installer for help.
IE006warningCall your installer
Manual (PDF)
Bus Volt Fault
Likely cause
Bus voltage fault.
What to do
Press the 'ESC' key to restart the inverter. Check that the PV input open circuit voltage is in the normal range. Or ask the installer for help.
IE007warningCall your installer
Manual (PDF)
Bat Volt Fault
Likely cause
Battery voltage fault.
What to do
Check battery input voltage if it's within normal range. Or ask the installer for help.
IE008warningCall your installer
Manual (PDF)
AC10M Volt Fault
Likely cause
Grid voltage out of range in the last 10 minutes.
What to do
The system will return to normal if the grid returns to normal. Or ask the installer for help.
IE009warningCall your installer
Manual (PDF)
DCI OCP Fault
Likely cause
DCI overcurrent protection fault.
What to do
Wait for a while to check if it's back to normal. Or ask the installer for help.
IE010warningCall your installer
Manual (PDF)
DCV OVP Fault
Likely cause
DCV EPS overvoltage protection failure.
What to do
Wait for a while to check if it's back to normal. Or ask the installer for help.
IE011warningCall your installer
Manual (PDF)
SW OCP Fault
Likely cause
Software Detection of Overcurrent Fault.
What to do
Wait for a while to check if it's back to normal. Shut down photovoltaic, battery, and grid connections. Or ask the installer for help.
IE012warningCall your installer
Manual (PDF)
RC OCP Fault
Likely cause
Overcurrent protection fault.
What to do
Check the impedance of DC input and AC output. Wait for a while to check if it's back to normal. Or ask the installer for help.
IE013warningCall your installer
Manual (PDF)
Isolation Fault
Likely cause
Insulation Fault.
What to do
Please check the wire insulation for damage. Wait for a while to check if it’s back to normal. Or ask the installer for help.
IE014warningCall your installer
Manual (PDF)
Temp Over Fault
Likely cause
Temperature beyond limit.
What to do
Check if ambient temperature exceeds the limit. Or ask the installer for help.
IE015warningCall your installer
Manual (PDF)
Bat Power Low
Likely cause
Battery power is low.
What to do
Close the high-power device and press the 'ESC' key to restart the inverter. Please charge the battery to a level higher than the protection capacity or protection voltage.
IE018warningCall your installer
Manual (PDF)
BMS Lost
Likely cause
Battery communication loss.
What to do
Check that the communication lines between the battery and the inverter are properly connected. Or ask the installer for help.
IE019warningCall your installer
Manual (PDF)
Fan Fault
Likely cause
Fan Fault.
What to do
Check for any foreign matter that may have caused the fan not to function properly. Or ask the installer for help.
IE020warningCall your installer
Manual (PDF)
Low Temp
Likely cause
Low temperature fault.
What to do
Check if the ambient temperature is too low. Or ask the installer for help.

Part of the Hiconics Eco-energy Drive Technology Co Ltd Power X1 series

Compare every Hiconics Eco-energy Drive Technology Co Ltd Power X1 variant side by side →

More Hiconics Eco-energy Drive Technology Co Ltd Inverters

HEC-S 3K (AS4777-2 2020)

3.68 kW · 1φ

HEC-S 5K (AS4777-2 2020)

4.999 kW · 1φ

HEC2-S3.8Hr2 (AS4777-2 2020)

3.8 kW · 1φ

HEC2-S5.0Hr2 (AS4777-2 2020)

5 kW · 1φ

HEC2-S6.0Hr2 (AS4777-2 2020)

6 kW · 1φ

MD-HI3.8-SHO (AS4777-2 2020)

3.8 kW · 1φ

View all Hiconics Eco-energy Drive Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area — you choose whether to act on it. No obligation.

About this data