Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Batteries
  3. PotisEdge
  4. ALOE series
  5. ALOE PRO-M15

Home battery · PotisEdge · ALOE series · CEC approved December 2024

PotisEdge ALOE PRO-M15

A 14.4 kWh home battery. Smaller home size, the 10 to 15 kWh band.

WA Battery Scheme rebate
Depends on your inverterThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter
Usable capacity
14.4kWh
Warranty
10yrs
Datasheet (PDF)

Get this battery quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

ALOE PRO-M15: the short answer

In the ALOE seriesThe series' closest fit to the WA rebate cap
14.4kWhThe series' closest fit to the WA rebate cap
WA Battery SchemeThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter
ConditionalThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter

Other sizes in the ALOE series

  • 4.8 kWh
  • 9.6 kWh
  • 14.4 kWh (this one)
  • 19.2 kWh
  • 24 kWh
  • 28.8 kWh
  • See the whole series →

What we can tell you

Read from the figures on this page. No review written yet.

  • 14.4 kWh sits in the smaller home band (10 to 15 kWh).
  • It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity
14.4kWh
How much energy it stores for you to use
Continuous power
Not on file: we don't have this figure from the manufacturer's documents yet
How much it can run at once
Round-trip efficiency
97%
How much of the energy you store comes back out
Warranty
10yr
How long the manufacturer stands behind it
Battery chemistry
LFP
Lithium iron phosphate, the long-cycle-life type
Size and weight
25kg
Installed weight

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Warranty and support

This warranty covers defects for 10 years. It excludes damage from misuse and claims can be made by contacting support.

Product
10 years; transferable; pro-rata
Throughput
Not on file
Installation
Must be installed by an SAA-accredited installer
Support
Not verifiedWe have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.
Perth heat
Rated to 45°C. Give it a shaded or indoor spot through Perth summers.

Warranty documentDatasheetCompare warranties

WA Battery Scheme eligibility

Conditional

Whether this battery pairs with an inverter listed for battery storage on Synergy's list, whether it can join a VPP, and whether it qualifies for the state rebate. Rebate and STC amounts are shown in the pricing panel.

This battery is AC-coupled. To get the WA rebate, the interest-free loan, VPP payments or DEBS export credits, it needs a gateway device from Synergy's approved list (for example SMA or Redback), or an inverter and battery from the same brand (Sungrow or Fronius). Without one, exports are capped at 1.5kW.

Some third-party gateways struggle to pass compliance testing, and adding anything to an AC-coupled system later means the whole system has to be re-checked. For many homes, switching to a hybrid (DC-coupled) inverter is the simpler path. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
VPP activation ready
Needs to pair with an inverter listed for battery storage on Synergy's list.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Full datasheet

Every figure on file for the PotisEdge ALOE, by section.

Cell & chemistry

Chemistry
LFP

Capacity & power

Nominal capacity
9.6 kWh
Usable capacity
14.4 kWh
Round-trip efficiency
97.3%

Physical

Weight
25 kg
IP rating
IP65

Operating environment

Operating temperature
-10°C to 45°C

Installation requirements

Top clearance
300 mm
Side clearance
300 mm
Front clearance
300 mm
AC breaker
50 A
Cable gauge
25 mm²
Earthing method
TN-S
DNSP pre-approval
No
Estimated install time
8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty terms and installation guide and user manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

Fault & error codes — PotisEdge ALOE

Extracted from the installation manual

20 documented

Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.

  • E12criticalCall your installer
    Manual (PDF)

    Battery pack offline

    Likely cause
    Connection issues with the battery pack
    What to do
    Reconnect the battery pack and check status.
  • E13criticalCall your installer
    Manual (PDF)

    Loss of communication between BMS and inverter

    Likely cause
    Faulty wiring or device failure
    What to do
    Inspect wiring and reset devices.
  • E14criticalCall your installer
    Manual (PDF)

    Outnumbered parallel-connection

    Likely cause
    Too many devices connected in parallel leading to faults
    What to do
    Reduce the number of parallel devices.
  • E15criticalCall your installer
    Manual (PDF)

    Control circuit fuse is triggered

    Likely cause
    Overcurrent leading to fuse failure
    What to do
    Replace the fuse and check load conditions.
  • E16criticalCall your installer
    Manual (PDF)

    Pre-charging failure

    Likely cause
    Insufficient voltage during pre-charging
    What to do
    Restart the charging sequence.
  • E17criticalCall your installer
    Manual (PDF)

    System short circuit/overcurrent

    Likely cause
    Improper connections or faulty components
    What to do
    Disconnect power and check for short circuits.
  • E18criticalCall your installer
    Manual (PDF)

    MOS short circuit fault

    Likely cause
    Internal fault in the battery management system
    What to do
    Disconnect the system and notify technical support.
  • E19criticalCall your installer
    Manual (PDF)

    PACK air switch disconnection fault

    Likely cause
    Air switch turned off causing disconnection
    What to do
    Reconnect the switch and check system status.
  • R01 E01warningCall your installer
    Manual (PDF)

    High cell voltage

    Likely cause
    Cell voltage exceeds the maximum limit
    What to do
    Wait for cooldown, and ensure battery is charged correctly.
  • R02 E02warningCall your installer
    Manual (PDF)

    Low cell voltage

    Likely cause
    Cell voltage drops below the minimum threshold
    What to do
    Recharge the battery immediately.
  • R03 E03warningCall your installer
    Manual (PDF)

    High battery voltage

    Likely cause
    Battery connected incorrectly or overcharging occurs
    What to do
    Check connections and reduce input voltage.
  • R04 E04warningCall your installer
    Manual (PDF)

    Low battery voltage

    Likely cause
    Insufficient charge in the battery
    What to do
    Recharge the battery immediately.
  • R07 E07warningCall your installer
    Manual (PDF)

    Low cell temperature

    Likely cause
    Cold conditions affecting battery performance
    What to do
    Move the battery to a warm environment.
  • R08 E05warningCall your installer
    Manual (PDF)

    High cell voltage difference

    Likely cause
    Voltage imbalance between cells
    What to do
    Check for damaged cells or connections.
  • R08 E08warning
    Manual (PDF)

    High cell temperature difference

    Likely cause
    Temperature variance among cells exceeds safe range
    What to do
    Investigate cell heating conditions
  • R09 E09warningCall your installer
    Manual (PDF)

    High charging current

    Likely cause
    Exceeding recommended charging rate
    What to do
    Reduce input current and monitor.
  • R10 E10warningCall your installer
    Manual (PDF)

    High discharge current

    Likely cause
    Overloading connected devices
    What to do
    Reduce load and monitor battery discharge.
  • R11 E11warningCall your installer
    Manual (PDF)

    High MOS temperature

    Likely cause
    Overheating from high current or poor airflow
    What to do
    Check for overheating and ensure airflow.
  • R12 E12warning
    Manual (PDF)

    Battery pack offline

    Likely cause
    More than one battery pack has a minor fault
    What to do
    Check connections and restore online
  • R86 E06warningCall your installer
    Manual (PDF)

    High cell temperature

    Likely cause
    Overheating due to environmental conditions or internal failure
    What to do
    Allow the battery to cool down and check ventilation.

About PotisEdge

Years on the CEC list
2+ (CEC-approved products since 2024)
Local support
Not verified
CEC-listed products
16 models
View full profile →

What it costs in Perth

We price batteries by size rather than by model. The average installed price before rebates:

10 kWh
$7,000–$9,000
20 kWh
$10,000–$15,000

Solar Battery Perth’s estimate, Oct 2026. Other sizes are not priced here, and a quote prices this model.

Rebates on this battery

WA Battery Scheme
Depends on your inverter
Federal STCs
−$3,830

The WA Battery Scheme (up to $1,300) needs VPP enrolment, and the battery needs to pair with an inverter listed for battery storage on Synergy's list. We don't know which inverter you'd pair this with, so we can't say whether it applies. Ask your installer. STCs assume about $39.9 a certificate.

Explore your options
  • Compare with the nearest batteries→
  • Already have a quote? Check it→
  • Get quotes on this battery→
  • Not sure what size you need?→

Which size band is your home?

Usable capacity, for one battery system

Smaller home
10 to 15 kWh
Medium home
20 to 30 kWh
Big home
30 to 40 kWh
Very big home
40+ kWh

This battery is one unit in the smaller home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Does waiting change the rebate?

Estimated federal rebate (STCs) for this 14.4 kWh battery

How it compares

The PotisEdge ALOE PRO-M15 against the closest-sized batteries from other brands.

Specification
PotisEdge ALOE PRO-M15PotisEdge
Energizer PS2900H-5Energizer
Renon R-XL014031Renon
Usable capacity?14.4 kWh14.4 kWh14.4 kWh
Continuous power?Not verifiedNot verifiedNot verified
Peak power?Not verifiedNot verifiedNot verified
Round-trip efficiency?97%Not verifiedNot verified
Warranty10 yearsNot verifiedNot verified
ChemistryLFPLFPNot verified

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

More from PotisEdge

Other CEC-approved products from PotisEdge available in Australia.

PotisEdge Inverters

IPS-4.6K-L120-S

4.6 kW

IPS-4.6K-L60-S

4.6 kW

IPS-5K-L120-S

5 kW

IPS-5K-L60-S

5 kW

IPS-6K-L120-S

6 kW

IPS-6K-L60-S

6 kW

View all PotisEdge inverters
View full PotisEdge manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

This model is one entry in the desk's index of solar batteries for Perth: every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Explore your optionsCompare batteries
Spotted something outdated?