Loading Solar Battery Perth...
Loading Solar Battery Perth...
Home battery · PotisEdge · CEC approved December 2024
A 19.2 kWh home battery with backup power.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Usable capacity
How much energy it stores for you to use
Continuous power
How much it can run at once — the essentials, not the whole house
Round-trip efficiency
How much of the energy you store comes back out
Depth of discharge
You can use the whole battery, not just part of it
Warranty
80% of capacity guaranteed at the end of it
Battery chemistry
Lithium iron phosphate — the long-cycle-life type
Every figure on file for the PotisEdge ALOE, by section.
| Specification | Value |
|---|---|
| Cell & chemistry | |
| Chemistry | LFP |
| Capacity & power | |
| Nominal capacity | 19.2 kWh |
| Usable capacity | 19.2 kWh |
| Continuous power | 4.8 kW |
| Peak power | 4.8 kW |
| Depth of discharge | 100% |
| Round-trip efficiency | 97.3% |
| Nominal voltage | 48 V |
| Lifespan & degradation | |
| Cycle life | 6000 cycles |
| Capacity retained at year 10 | 80% |
| Warranted throughput | 5000 MWh |
| Modularity & stacking | |
| Modular / stackable | Yes |
| Maximum stack | 19.2 kWh |
| Backup & grid services | |
| Backup capable | Yes |
| VPP ready | No |
| Physical | |
| Dimensions (H×W×D) | 806 × 600 × 430 mm |
| Weight | 180 kg |
| IP rating | IP65 |
| Operating environment | |
| Operating temperature | -10°C to 45°C |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| Front clearance | 300 mm |
| AC breaker | 50 A |
| Cable gauge | 25 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
This warranty covers defects for 10 years. It excludes damage from misuse and claims can be made by contacting support.
10
years
5000
MWh
45°
celsius
Level 0
No Backup
We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.
Rated to 45°C. Give it a shaded or indoor spot through Perth summers.
CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.
Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings
2 years in the Australian market
Extracted from the installation manual
Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.
E12criticalCall your installerBattery pack offline
E13criticalCall your installerLoss of communication between BMS and inverter
E14criticalCall your installerOutnumbered parallel-connection
E15criticalCall your installerControl circuit fuse is triggered
E16criticalCall your installerPre-charging failure
E17criticalCall your installerSystem short circuit/overcurrent
E18criticalCall your installerMOS short circuit fault
E19criticalCall your installerPACK air switch disconnection fault
R01 E01warningCall your installerHigh cell voltage
R02 E02warningCall your installerLow cell voltage
R03 E03warningCall your installerHigh battery voltage
R04 E04warningCall your installerLow battery voltage
R07 E07warningCall your installerLow cell temperature
R08 E05warningCall your installerHigh cell voltage difference
R08 E08warningHigh cell temperature difference
R09 E09warningCall your installerHigh charging current
R10 E10warningCall your installerHigh discharge current
R11 E11warningCall your installerHigh MOS temperature
R12 E12warningBattery pack offline
R86 E06warningCall your installerHigh cell temperature
$17,280
Typical installed price, before rebates
The WA Battery Scheme (up to $1,300) needs a Synergy-approved inverter and VPP enrolment. We don't know which inverter you'd pair this with, so it isn't deducted above — ask your installer. STCs assume about $39.9 a certificate. Estimates only; your quote will vary.
Usable capacity, for one battery system
This battery sits between the smaller home and medium home bands. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.
Estimated federal rebate (STCs) for this 19.2 kWh battery
The PotisEdge ALOE-MB20 against the closest-sized batteries from other brands.
| Specification | PotisEdge ALOE-MB20PotisEdge | Alpha ESS SMILE-G3-BAT-10.1P IIAlpha ESS | GoodWe LX F19.2-H-20GoodWe |
|---|---|---|---|
| Usable capacity? | 19.2 kWh | 19.2 kWh | 19.2 kWh |
| Continuous power? | 4.8 kW | Not verified | Not verified |
| Peak power? | 4.8 kW | Not verified | Not verified |
| Round-trip efficiency? | 97%best value | 92% | 92% |
| Warranty | 10 years | Not verified | Not verified |
| Chemistry | LFP | LFP | LFP |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Other CEC-approved products from PotisEdge available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
This model is one entry in the desk's index of solar batteries for Perth — every CEC-approved battery on one comparable dataset.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.