Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · PotisEdge · IPS Series series · CEC approved December 2024
CEC listing: IPS-5K-L120-S (AS4777-2 2020)
A 5 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
MPPT trackers
2 roof faces can be tuned independently
Type
Runs solar and a battery from one unit
Warranty
How long iPotisEdge Co Ltd stands behind it
Every figure on file for the PotisEdge IPS-5K-L120-S, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.3% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| AC breaker | 40 A |
| Cable gauge | 6 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
16 Dec 2024
Approval expiry
16 Dec 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
16
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$1,750–$3,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The PotisEdge IPS-5K-L120-S against the closest-power inverters from other brands.
| Specification | PotisEdge IPS-5K-L120-SPotisEdge | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 97.3%best value | 0.0% | 0.0% |
| MPPT trackers? | 2 | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in design or manufacture for 5 years from the date of purchase. Exclusions include unauthorized modifications, improper installation, and damage caused by misuse. To make a claim, provide the product model, serial number, purchase invoice, and error details.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the PotisEdge IPS Series series
Compare every PotisEdge IPS Series variant side by side →
IPS-4.6K-L120-S (AS4777-2 2020)
4.6 kW · 1φ
IPS-4.6K-L60-S (AS4777-2 2020)
4.6 kW · 1φ
IPS-5K-L60-S (AS4777-2 2020)
5 kW · 1φ
IPS-6K-L120-S (AS4777-2 2020)
6 kW · 1φ
IPS-6K-L60-S (AS4777-2 2020)
6 kW · 1φ
IPT-10K-S (AS4777-2 2020)
10 kW · 3φ
Other CEC-approved products from iPotisEdge Co Ltd available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.