Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Batteries
  3. Energizer
  4. Powerstack series
  5. PS2900H-5

Home battery · Energizer · Powerstack series · CEC approved April 2024

Energizer PS2900H-5

A 14.4 kWh home battery. Smaller home size, the 10 to 15 kWh band.

WA Battery Scheme rebate
Depends on your inverterThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter
Usable capacity
14.4kWh
Warranty
10yrs
Datasheet (PDF)

Get this battery quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

PS2900H-5: the short answer

In the Powerstack seriesOne of 6 sizes, from 5.76 to 20.16 kWh
14.4kWhOne of 6 sizes, from 5.76 to 20.16 kWh
WA Battery SchemeThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter
Check eligibilityThe battery needs to pair with an inverter listed for battery storage on Synergy's list; we don't know your inverter

Other sizes in the Powerstack series

  • 5.76 kWh
  • 8.64 kWh
  • 11.52 kWh
  • 14.4 kWh (this one)
  • 17.28 kWh
  • 20.16 kWh
  • See the whole series →

What we can tell you

Read from the figures on this page. No review written yet.

  • 14.4 kWh sits in the smaller home band (10 to 15 kWh).
  • It is CEC-approved, which is a condition of both the federal STC discount and the WA Battery Scheme.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Usable capacity
14.4kWh
How much energy it stores for you to use
Round-trip efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the energy you store comes back out
Warranty
10yr
How long the manufacturer stands behind it
Battery chemistry
LiFePO4 Prismatic Cell
The cell type inside it
Size and weight
164.3kg
710 × 570 × 380 mm, roughly a large suitcase on the wall

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Warranty and support

The Energizer Solar Powerstack has a 10-year warranty covering defects, with the major exclusion being non-accredited installation. Claims can be made via customer support.

Product
10 years; transferable; full replacement
Throughput
Not on file
Installation
Must be installed by an SAA-accredited installer
Support
Australian supportAustralian support contact on record; 3 years on the CEC list. Confirm the claim process with your installer.
Perth heat
Rated to 55°C, which covers Perth's hottest days.

Warranty documentDatasheetCompare warranties

WA Battery Scheme eligibility

Check eligibility

Whether this battery pairs with an inverter listed for battery storage on Synergy's list, whether it can join a VPP, and whether it qualifies for the state rebate. Rebate and STC amounts are shown in the pricing panel.

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
VPP activation ready
Needs to pair with an inverter listed for battery storage on Synergy's list.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

Full datasheet

Every figure on file for the Energizer Powerstack, by section.

Cell & chemistry

Chemistry
LiFePO4 Prismatic Cell
Cell type
Prismatic

Capacity & power

Nominal capacity
14.4 kWh
Continuous power
0 kW
Peak power
0 kW
Nominal voltage
288 V

Modularity & stacking

Modular / stackable
Yes
Maximum stack
20.16 kWh

Backup & grid services

Backup capable
No
VPP ready
No

Physical

Dimensions (H×W×D)
710 × 570 × 380 mm
Weight
164.3 kg
IP rating
IP65

Operating environment

Operating temperature
-10°C to 55°C

Installation requirements

Cable gauge
6 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualOpens in a new tab
  • Compliance certificatePDF, opens in a new tab

Fault & error codes — Energizer Powerstack

Extracted from the installation manual

20 documented

Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.

  • 10min Volt Faultcritical
    Manual (PDF)

    The grid voltage is out of range for the last 10 Minutes.

    Likely cause
    Persistent abnormal voltage levels from the grid.
    What to do
    System will reconnect if the utility is back to normal. Seek help if it does not return to normal state.
  • Grid Freq Faultcritical
    Manual (PDF)

    Grid frequency out of range.

    Likely cause
    Frequency wave fluctuation from the power grid.
    What to do
    System will reconnect if the utility is back to normal. Seek help if it does not return to normal state.
  • Grid Lost Faultcritical
    Manual (PDF)

    Grid is lost.

    Likely cause
    Loss of connection to the power grid.
    What to do
    System will reconnect if the utility is back to normal. Seek help if it does not return to normal state.
  • Grid Volt Faultcritical
    Manual (PDF)

    Grid voltage out of range.

    Likely cause
    Voltage being too high or too low from the power grid.
    What to do
    System will reconnect if the utility is back to normal. Seek help if it does not return to normal state.
  • Ground FaultcriticalCall your installer
    Manual (PDF)

    The ground connection is failed.

    Likely cause
    Issue with the ground wiring or connections.
    What to do
    Check the voltage of neutral and PE. Check AC wiring. Disconnect PV, grid, and battery, then reconnect. Seek help if necessary.
  • Iso FaultcriticalCall your installer
    Manual (PDF)

    The isolation is failed.

    Likely cause
    Damaged insulation of electric wires.
    What to do
    Check if the insulation of electric wires is damaged. Wait for a while to see if it returns to normal. Seek help if necessary.
  • PLL_OverTimecritical
    Manual (PDF)

    Three-phase system access single-phase AC.

    Likely cause
    Improper connection to the AC grid.
    What to do
    System will reconnect if the utility is back to normal. Seek help if it does not return to normal state.
  • Res Cur FaultcriticalCall your installer
    Manual (PDF)

    The residual current is high.

    Likely cause
    Faulty insulation or a short circuit.
    What to do
    Check if the insulation of electric wires is damaged. Wait for a while to see if it returns to normal. Seek help if needed.
  • Bat Volt Faultwarning
    Manual (PDF)

    Battery voltage fault.

    Likely cause
    Battery voltage is too low or too high.
    What to do
    Check if the battery input voltage is within the normal range. Seek help if necessary.
  • DCI Faultwarning
    Manual (PDF)

    DC component is out of limit in output current.

    Likely cause
    Unbalanced current levels at the DC output.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • Eps Over Loadwarning
    Manual (PDF)

    Over load in off grid mode.

    Likely cause
    Load power exceeds inverter capacity in EPS mode.
    What to do
    Check if the EPS load power exceeds the limit. Seek assistance if necessary.
  • HW Inv Cur Faultwarning
    Manual (PDF)

    Output current high detected by hardware.

    Likely cause
    Excessive current draw by the system or load.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • Over Load Faultwarning
    Manual (PDF)

    Over load in on grid mode.

    Likely cause
    Load power exceeds inverter limit.
    What to do
    Check if the load power exceeds the limit. Seek assistance if necessary.
  • Pv Volt Faultwarning
    Manual (PDF)

    PV voltage out of range.

    Likely cause
    The output voltage of PV panels is not within specifications.
    What to do
    Check the output voltage of PV panels. Seek help if necessary.
  • SW Bat Cur Faultwarning
    Manual (PDF)

    Battery current high detected by software.

    Likely cause
    Excessive current draw from the battery.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • SW Bus Vol Faultwarning
    Manual (PDF)

    Bus voltage out of range detected by software.

    Likely cause
    Voltage irregularities on the system bus.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • SW Inv Cur Faultwarning
    Manual (PDF)

    Output current high detected by software.

    Likely cause
    Excessive current draw by the system or load.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • SW Pv Cur Faultwarning
    Manual (PDF)

    PV input current high detected by software.

    Likely cause
    Excessive current draw from the PV input.
    What to do
    Disconnect PV, grid, and battery, then reconnect. Seek help if it does not return to normal state.
  • Temp Faultwarning
    Manual (PDF)

    The inverter temperature is high.

    Likely cause
    Environmental temperature is too high.
    What to do
    Check if the environment temperature is appropriate. Wait for a while to see if it returns to normal. Seek help if necessary.
  • Bat Power Lowinfo
    Manual (PDF)

    The battery power is low.

    Likely cause
    Battery has insufficient charge.
    What to do
    Wait for the battery to be recharged. Seek help if needed.

About Energizer

Years on the CEC list
3+ (CEC-approved products since 2023)
Local support
Available
CEC-listed products
14 models
View full profile →

What it costs in Perth

We price batteries by size rather than by model. The average installed price before rebates:

10 kWh
$7,000–$9,000
20 kWh
$10,000–$15,000

Solar Battery Perth’s estimate, Oct 2026. Other sizes are not priced here, and a quote prices this model.

Rebates on this battery

WA Battery Scheme
Depends on your inverter
Federal STCs
−$3,830

The WA Battery Scheme (up to $1,300) needs VPP enrolment, and the battery needs to pair with an inverter listed for battery storage on Synergy's list. We don't know which inverter you'd pair this with, so we can't say whether it applies. Ask your installer. STCs assume about $39.9 a certificate.

Explore your options
  • Compare with the nearest batteries→
  • Already have a quote? Check it→
  • Get quotes on this battery→
  • Not sure what size you need?→

Which size band is your home?

Usable capacity, for one battery system

Smaller home
10 to 15 kWh
Medium home
20 to 30 kWh
Big home
30 to 40 kWh
Very big home
40+ kWh

This battery is one unit in the smaller home band. The WA rebate caps at 10 kWh, but that is a rebate limit, not a sizing guide.

Does waiting change the rebate?

Estimated federal rebate (STCs) for this 14.4 kWh battery

How it compares

The Energizer PS2900H-5 against the closest-sized batteries from other brands.

Specification
Energizer PS2900H-5Energizer
PotisEdge ALOE-MB15PotisEdge
PotisEdge ALOE PRO-M15PotisEdge
Usable capacity?14.4 kWh14.4 kWh14.4 kWh
Continuous power?0 kWNot verifiedNot verified
Peak power?0 kWNot verifiedNot verified
Round-trip efficiency?Not verifiedNot verifiedNot verified
Warranty10 yearsNot verifiedNot verified
ChemistryLiFePO4 Prismatic CellLFPLFP

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

More from Energizer

Other CEC-approved products from Energizer available in Australia.

Energizer Inverters

Force 10.0HS+

10 kW

Force 10.0HT+

10 kW · 3φ

Force 10.0S

10 kW

Force 10.5HS+

10.5 kW

Force 10.5S

10.5 kW

Force 12.0HT+

12 kW · 3φ

View all Energizer inverters

Energizer Solar Panels

ENSP48NDG3440BF

440W

ENSP48NDG3440BL

440W

ENSP48NDG3445BF

445W

ENSP48NDG3445BL

445W

ENSP48NDG3450BF

450W

ENSP48NDG3450BL

450W

View all Energizer panels
View full Energizer manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

This model is one entry in the desk's index of solar batteries for Perth: every CEC-approved battery on one comparable dataset.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Explore your optionsCompare batteries
Spotted something outdated?