Batteries23 listed
- Approved models
- 23
- Usable capacity
- 4.8-44.8 kWh
- Chemistry
- LFP, Lithium-ion
SAJ · manufacturer profile
The EK70 and EK90 HS5 modules
Inverter manufacturer
Updated 2 November 2026 · Checked against SAJ's Australian warranty and EK datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
SAJ is the brand name of Guangzhou Sanjing Electric, which makes hybrid inverters and the battery modules that pair with them. The two modules on this page, the EK70 and EK90, hold 7 or 9 kWh each and use LFP cells (lithium iron phosphate). Their datasheets rate them at 10,000 and 12,000 cycles. SAJ's Australian EK warranties give the EK70 system 10 years and the EK90 system 15 years, each with 70% of capacity kept for the term. The full term needs the system online. SAJ Digital Energy Australia Pty Ltd is the Australian contact printed on them. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. SAJ's single-phase and three-phase HS5 hybrids were on Synergy's list dated 30 October 2026, under the EK70 HS5 and EK90 HS5 series names. An EK module on one of them pairs with an inverter listed for battery storage on Synergy's list.
Specifications and pricing change. Confirm them with the manufacturer.
The company
Guangzhou Sanjing Electric Co., Ltd. is the maker printed on the datasheets. SAJ is the name on the products. It builds hybrid inverters and the battery modules that sit with them. It also gives the Australian battery warranty under the SAJ name. It is based in Guangzhou. No SAJ document we read gives a founding year or a staff count, so this page prints none.
In Australia, the warranty's contact block prints SAJ Digital Energy Australia Pty Ltd, a Victorian company. No SAJ document we read says whether it is SAJ's own arm or a distributor. Either way, it is the name a Perth owner reaches when a claim goes past the installer.
A fault goes first to the installer or distributor who supplied the system. The warranty asks for any failure or warning that stops the system working to be reported to the distributor within 30 days. SAJ then repairs or replaces the product at its own discretion.
From SAJ's Australian battery warranty (AU V4.0) and the Australian Business Register, read 14 October 2026.
SAJ treats the module and the hybrid as one sealed system. The IP66 rating on the datasheets (dust-tight and sealed against strong water jets) is for the module combined with the HS5 series inverter, not for the module on its own. So the enclosure claim only holds when the two are installed together as SAJ designed them.
The datasheets print large cycle figures. The EK90 is rated at 12,000 cycles and the EK70 at 10,000, both measured at 25 °C down to 60% of capacity. Both modules also give their whole capacity: on the datasheets, usable equals total, at 100% depth of discharge (the share of the battery the system lets you use). Those are laboratory figures and not warranty terms.
On the Clean Energy Council (CEC) register, SAJ's batteries sit in five series: B2, B2S, CHS2, EK70 HS5 and EK90 HS5. This page covers the two EK series, because those have an Australian datasheet we have read. The B2, B2S and CHS2 are on the register. No Australian datasheet we read covers them, so they get no card here.
Two sizes on the register, 7 kWh (EK90 BU5-7.0-TV) and 9 kWh (EK90 BU5-9.0-TV), LFP, rated at 12,000 cycles
CEC approved
Two sizes on the register, 7 kWh (EK70 BU5-7.0-TV) and 9 kWh (EK70 BU5-9.0-TV), LFP, rated at 10,000 cycles
CEC approved
On the CEC register; no Australian datasheet read, so no figures here
CEC approved
They are LFP battery modules made to sit with SAJ's HS5 hybrid inverter. Each comes as a 7 kWh or a 9 kWh module, and on the datasheets the usable capacity is the full 7 or 9 kWh. That capacity is tested at 25 °C, at a gentle charge and discharge rate, when the module is new. The cells inside are 314 Ah LFP cells.
Among the figures we took from the two datasheets, one sets them apart: the cycle rating. The EK90 is rated at 12,000 cycles and the EK70 at 10,000, both measured down to 60% of capacity. Both list the same five standards. Both are rated IP66 as a system with the HS5 inverter.
The datasheets give the rest. A 7 kWh module weighs 71.7 kg and a 9 kWh module 79.2 kg. Each is 835 by 270 by 270 mm. They charge and discharge at up to 3.5 kW and 4.6 kW respectively. One HS5 inverter takes one to six modules. The sources differ on a wall mount: the datasheets print one to six for floor-standing or wall-mounted with no split, but all four EK quick installation guides say a wall mount supports two batteries at most, with up to six on the floor. SAJ's EK90 HS5 manual gives a 10 millisecond switch to backup.
The HS5. The datasheets treat each module as part of an HS5 system, and their IP66 rating is for the module combined with the HS5 inverter. SAJ's EK warranties pair each EK family with its own HS5 inverters, from the 5 kW single-phase to the 20 kW three-phase. The datasheets allow one to six modules per inverter, and the quick installation guides cap a wall mount at two. So an EK90 module goes with an EK90 HS5, and an EK70 with an EK70 HS5. The HS5 code on the quote is also the code that matters for the WA rebate, because Synergy's list names inverters.
Both modules use LFP cells. The datasheets list five standards. UN 38.3 is the transport safety test for lithium batteries. IEC/EN 62619 and IEC/EN 63056 are safety standards for lithium cells and batteries in storage systems. IEC/EN 60730-1 and IEC/EN 62040 cover the control electronics. No test report we read backs those lines, so they stand as the datasheet's word.
No SAJ document we read describes a fire suppression system or a cell-level safety design, so this page says nothing about either.
SAJ's Australian limited warranty, version AU V4.0, applies to its B1, BU2, B2 and B2S batteries and its AS1, AS2 and HS2 storage systems, bought and installed in Australia. The BU2, B2, B2S, AS2 and HS2 get 10 years, counted as 120 months from commissioning or 126 months from shipment, whichever comes first. The AS1 and B1 get 7 years, counted the same way (84 or 90 months).
The capacity promise is 60% of usable capacity for 10 years. It ends sooner if a set amount of energy has passed through first. That amount is 3.06 MWh (megawatt-hours, or 3,060 kWh) for each kWh of usable capacity. At one full cycle a day it lasts about 8.4 years, by our arithmetic.
Three conditions matter most. The battery has to be installed within 6 months of leaving SAJ. It has to be installed and commissioned by a professional installer. And a failure or warning that stops the system working has to be reported to your distributor within 30 days. SAJ then repairs or replaces the product at its discretion. The warranty carries the Australian Consumer Law guarantee statement.
SAJ publishes a separate Australian warranty for each EK system, version 1.0 of 8 August 2026. The EK70 system gets 10 years and the EK90 system 15. Each term counts from first install or six months after shipment, whichever is earlier. The battery keeps 70% of nominal energy over the term, unless 3.25 MWh (EK70) or 4.4 MWh (EK90) per kWh has passed through first. A system that is not online or not registered with SAJ keeps at least 5.5 years (EK70) or 7.5 years (EK90). The AU V4.0 terms above cover SAJ's older battery series.
For the EK70 the warranty answer is 70% of nominal energy for 10 years or until 3.25 MWh per kWh has passed through. At one full cycle a day that allowance lasts about 8.9 years, by our arithmetic. For the EK90 it is 70% for 15 years or 4.4 MWh per kWh, about 12 years at one cycle a day. The datasheets add lab figures: 12,000 cycles for the EK90 and 10,000 for the EK70, measured at 25 °C down to 60% of capacity. Those are test results, not warranty terms.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. SAJ's single-phase and three-phase HS5 hybrids were on Synergy's list dated 30 October 2026, under the EK70 HS5 and EK90 HS5 series names. An EK module on one of them pairs with an inverter listed for battery storage on Synergy's list.
Synergy's list names inverters, not batteries. An EK module counts through the HS5 hybrid it is installed with, and the list carries SAJ's series under its register name, Guangzhou Sanjing Electric. So the listing above is matched against the HS5 model code on the quote, letter for letter.
SAJ's CHS2, H2, EK70 HS5 Single Phase, EK70 HS5 Three Phase, EK90 HS5 Single Phase and EK90 HS5 Three Phase inverters on Synergy's list are marked activation-ready for a Synergy VPP program, and its other listed series are not yet marked activation-ready for a Synergy VPP program (list dated 30 October 2026). Getting the WA rebate also means joining a virtual power plant (VPP), a program that lets a retailer call on a group of home batteries. Synergy runs its own, called Battery Rewards. The scheme also accepts a VPP run by the battery supplier, on its own conditions. No SAJ document we read says which VPPs its systems join, so ask the installer to name one.
Our WA battery rebate page sets out the rest of the scheme's conditions. Our Synergy approved products guide explains how the list is laid out.
An SAJ battery is an EK module installed with an SAJ HS5 hybrid, so the quote has to name both. The datasheets give cycle ratings, full usable capacity, weight and output, and allow one to six modules per inverter, though SAJ's quick installation guides cap a wall mount at two. SAJ's Australian EK warranties give 10 years (EK70) or 15 years (EK90), with the full term only while the system stays online. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. SAJ's single-phase and three-phase HS5 hybrids were on Synergy's list dated 30 October 2026, under the EK70 HS5 and EK90 HS5 series names. An EK module on one of them pairs with an inverter listed for battery storage on Synergy's list.
Ask the installer for the HS5 inverter code and the EK module code in writing, and for the EK warranty that covers it. Both EK series are on the CEC approved battery list as of 20 October 2026. Ask who the distributor is, because a fault has to be reported to them within 30 days of it appearing.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Batteries | LFP (lithium iron phosphate), Lithium-ion, 4.8-44.8 kWh usable |
|---|---|
| Approved now | 23 batteries and 76 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office. Contact details |
| Local support | Yes, support handled through Australian channelsSource: maker's Australian site, checked 8 May 2026Confirmed |
| CEC listings | 99 approved right now · 28 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
23 CEC-approved batteries · grouped into 3 series
Grouped by series. Open a series for each variant, or a model for full specs.
76 CEC-approved inverters, 28 not currently listed · grouped into 4 series · showing first 50 of 104
CHS2-29.9K-T4-204.8V/280Ah/51.5kWh (AS4777-2 2020)
CHS2-29.9K-T4-256.0V/280Ah/64.4kWh (AS4777-2 2020)
CHS2-29.9K-T4-307.2V/280Ah/77.3kWh (AS4777-2 2020)
CHS2-29.9K-T4-358.4V/280Ah/90.2kWh (AS4777-2 2020)
CHS2-50K-T6-204.8V/280Ah/51.5kWh (AS4777-2 2020)
CHS2-50K-T6-256.0V/280Ah/64.4kWh (AS4777-2 2020)
CHS2-50K-T6-307.2V/280Ah/154.6kWh (AS4777-2 2020)
CHS2-50K-T6-307.2V/280Ah/77.3kWh (AS4777-2 2020)
CHS2-50K-T6-358.4V/280Ah/180.4kWh (AS4777-2 2020)
CHS2-50K-T6-358.4V/280Ah/90.2kWh (AS4777-2 2020)
What has happened to SAJ on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
⚡ 5 Inverter Models Listed
Inverter range expanded to 5 CEC-approved models.
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
⚡ 50 Inverter Models Listed
Inverter range expanded to 50 CEC-approved models.
Yes. SAJ's Australian EK70 and EK90 warranties (8 August 2026) name the EK70 and EK90 BU5 modules and HS5 inverters: 10 years for the EK70 system and 15 for the EK90, with 70% capacity kept.
SAJ's EK warranties promise 70% of nominal energy for 10 years on the EK70 and 15 years on the EK90, unless 3.25 MWh or 4.4 MWh per kWh has passed through first. At one full cycle a day those allowances last about 8.9 and 12 years, by our arithmetic. The EK90 and EK70 datasheets rate the cells at 12,000 and 10,000 cycles in the lab, which is not a warranty term.
The datasheets rate the module and HS5 inverter together at IP66, dust-tight and sealed against strong water jets. The EK90 charges from -30 to 50 °C and the EK70 from 0 to 50 °C, and the warranty needs the system run inside the manual's temperature range with enough ventilation. SAJ's Australian manual for the EK90 and HS5 carries a danger warning, for risk of reduced life cycle, fire or explosion: do not place the battery near a heat source, such as direct sunlight or a fireplace. Both T3 manuals say the same, so keep it out of direct sun.
Your installer or distributor first. The warranty asks for a fault to be reported to the distributor within 30 days, and SAJ then repairs or replaces the product at its discretion. The Australian company printed on the warranty is SAJ Digital Energy Australia Pty Ltd.
SAJ's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 23 CEC-approved SAJ battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
SAJ has 76 CEC-approved inverter models from 0.7-125 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.
43 of SAJ's 76 inverter models are hybrid inverters, which connect a home battery directly. Confirm which batteries each model supports with your installer.
Are you SAJ?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.