Hybrid inverter · SAJ · CEC approved April 2025
CEC listing: CHS2-29.9K-T4-256.0V/280Ah/64.4kWh (AS4777-2 2020)
A 30 kW three-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the SAJ CHS2-29.9K-T4-256.0V/280Ah/64.4kWh, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98% |
| Physical | |
| IP rating | IP55 |
| Operating temperature | -30°C to 50°C |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Cable gauge | 6 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Website
www.saj-electric.comThe SAJ CHS2-29.9K-T4-256.0V/280Ah/64.4kWh against the closest-power inverters from other brands.
| Specification | GoodWe GW29.999K-BTA-G20GoodWe | GoodWe GW29.999K-ETA-G20GoodWe | |
|---|---|---|---|
| Rated power? | 29.999 kW | 29.999 kW | 29.999 kW |
| Max efficiency? | 98.0% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Hybrid | Battery | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The SAJ HYBRID SOLAR INVERTER is covered by a warranty for defects in materials and workmanship for up to 5 years. To make a claim, please contact your dealer with proof of purchase. The warranty does not cover damages from unauthorized modifications or installations.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.
1criticalCall your installerMaster Relay Error
10criticalCall your installerMaster Phase1 Voltage Low
9criticalCall your installerMaster Phase1 Voltage High
2warningMaster EEPROM Error
3warningMaster Temperature High Error
4warningMaster Temperature Low Error
5warningLost Communication M<->S
6warningGFCI Device Error
7warningDCI Device Error
8warningCurrent Sensor Error
CHS2-29.9K-T4-204.8V/280Ah/51.5kWh (AS4777-2 2020)
29.999 kW · 3φ
CHS2-29.9K-T4-307.2V/280Ah/77.3kWh (AS4777-2 2020)
29.999 kW · 3φ
CHS2-29.9K-T4-358.4V/280Ah/90.2kWh (AS4777-2 2020)
29.999 kW · 3φ
H2-30K-T3-AU (AS4777-2 2020)
29.999 kW · 3φ
R6-30K-T4-32-AUS (AS4777-2 2020)
29.999 kW · 3φ
R6-33K-T4-32-AUS (AS4777-2 2020)
33 kW · 3φ
Other CEC-approved products from SAJ available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.