Batteries43 listed
- Approved models
- 31
- Usable capacity
- 3.4-45 kWh
- Pair with an inverter listed for battery storage on Synergy's list
- 13 of 43 systems
- Chemistry
- LFP
Pylontech · manufacturer profile
The Force H3X all-in-one and the batteries that join another hybrid
Battery manufacturer
Updated 2 November 2026 · Checked against Pylontech's Australian warranties and spec sheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
Pylontech is a battery maker based in Shanghai. Its parent company stands behind every warranty sold here. The Force H3X builds the hybrid inverter into the battery stack, single-phase or three-phase. The Force-H3, ReefMagic, US5000 and Fidus run on a hybrid that Pylontech has certified. Every warranty runs 10 years and ties its cover or its energy allowance to daily use. Depending on the warranty, a claim goes to the reseller, Pylontech's own company in Sydney or its importer in South Australia. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The FH3X's own inverter is on Synergy's list dated 30 October 2026, so an FH3X pairs with an inverter listed for battery storage on Synergy's list. Check the full FH3X code on your quote.
Specifications and pricing change. Confirm them with the manufacturer.
The company
Pylontech says it was founded in 2009. It says it makes its own cells, modules, battery management and energy management. It says its shares have traded on Shanghai's STAR Market since 2020. It puts its headquarters in Shanghai, with factories in Jiangsu, Anhui and Italy.
Pylontech says it first delivered energy storage systems to the global market in 2013. It says its Australian arm, Pylon Technologies Australia Pty Ltd, opened a Sydney office in 2025. That office serves Australia and New Zealand. Redback says its battery systems now use Pylontech batteries. The Redback G3 enclosure's datasheet lists its battery unit as the US5000.
Every Pylontech warranty names Pylon Technologies Co., Ltd. in Shanghai as the warrantor. The local company that takes a claim depends on the battery. For the Force H3X, Fidus and ReefMagic it is Pylon Technologies Australia Pty Ltd, in Alexandria, Sydney. For the US series and the Pelio-L it is Forte Powertech Pty Ltd, in Lonsdale, South Australia. A Force-H3 claim goes to the reseller who sold it, and its warranty names Forte Powertech as the importer. No Pylontech document we read names a WA distributor.
Pylontech's warranties print three different phone numbers, and each belongs to a product. The band below labels each one. Call the number on the warranty that came with your battery.
From Pylontech Australia's contact page and each product warranty, read 8 and 29 October 2026.
Pylontech is a battery company first. Pylontech says it makes the cells and the battery management itself. Its batteries are sold two ways. Inside the Force H3X, with Pylontech's own hybrid inverter built in, or on their own, to run on another maker's hybrid.
For the batteries sold on their own, Pylontech publishes which hybrids it has certified. Its ReefMagic declaration lists hybrid series from 39 other makers, plus its own FHM hybrids. Its high-voltage list gives the module count each hybrid can run with a Force-H3 or ReefMagic stack. That list is what an installer matches a quote against. The warranties exclude a hybrid Pylontech has not certified.
The warranties also expect use. The Force H3X, US series, Fidus and Pelio-L warranties cover a battery used on a daily cycle basis, and the Force-H3 and ReefMagic tie their energy allowance to a daily cycle. On most of the range the capacity promise ends sooner once a set amount of energy has passed through.
Pylontech's battery lines and two hybrid lines are on the Clean Energy Council (CEC) register. Most of the batteries are listed until 31 December 2027, and the FHM hybrids to July 2029. The Pelio-L-5.12 is listed only until 25 November 2026, so a quote naming one needs a check that it is still listed. The US3000C is listed too, but no Australian document we read gives its figures, so this page prints none.
Battery modules and a hybrid inverter in one stack, 5 to 8 kW single-phase or 8 to 15 kW three-phase, 5.12 to 35.84 kWh nominal
CEC approved
Pylontech's own 5 kW and 8 kW single-phase hybrids, for a Force-H3 or ReefMagic stack
CEC approved
High-voltage stack of 5.12 kWh modules, 5.12 to 35.84 kWh usable, IP65
CEC approved
High-voltage stack of 7.5 kWh modules, 15 to 52.5 kWh, IP65
CEC approved
4.8 kWh nominal, 4.56 kWh usable, IP20, indoors or in a Pylontech enclosure
CEC approved
5.12 kWh nominal, 4.966 kWh usable, IP65
CEC approved
The Force H3X is Pylontech's all-in-one. Modules of 5.12 kWh stack under a hybrid inverter, and a hybrid inverter runs the panels, the battery and the house from one box. Single-phase builds take one to four modules, 5.12 to 20.48 kWh nominal. Three-phase builds take two to seven, 10.24 to 35.84 kWh nominal. The spec sheet prints no usable figure. On the CEC register, usable is 4.864 to 19.456 kWh single-phase and 10.24 to 35.84 kWh three-phase.
Single-phase models on the register run from 5 kW to 8 kW, and the battery can charge at 8 kW with more than one module. With one module, charge and discharge are held to 2.5 kW, so a one-module stack runs less at once. Three-phase models run from 8 kW to 15 kW and need more than two modules to reach full battery power.
In a blackout the switch to backup takes 10 milliseconds or less. The backup output is 5,000 VA on the smallest single-phase model on the register and 8,000 VA on the largest (VA is the rating the spec sheet uses for backup). Three-phase models give 8,000 to 15,000 VA. Each can run higher for 60 seconds, which covers a motor starting.
The stack is rated IP65, dust-tight and protected against water jets, and C5-M for salt spray (a marine-grade corrosion class). It runs from -10 to 55 °C and cuts its power above 45 °C. A four-module single-phase stack stands 1,175 mm tall and weighs 194 kg, so it goes on the floor. Pylontech's manuals fix it to the wall only with anti-toppling brackets, and say the stack still needs to stand on the support surface to carry its weight.
Pylontech says the stack installs and commissions in 15 minutes and pairs units in parallel on its own. It says the energy management plans charging around a dynamic tariff from the cloud and can run a heat pump remotely. No document we read puts a figure on what that saves, so this page does not either.
Both are high-voltage stacks that run on a separate hybrid. The Force-H3 stacks LFP modules (lithium iron phosphate) of 5.12 kWh, one to seven, for 5.12 to 35.84 kWh. Its datasheet gives usable equal to nominal, at 100% depth of discharge (the share of the battery you can use). Power rises with the stack, from 5.12 kW to 35.84 kW. A seven-module stack stands 1,380 mm tall and weighs 287 kg.
The ReefMagic stacks 7.5 kWh usable modules, two to seven, for 15 to 52.5 kWh. Its spec sheet prints the current rather than a kW figure: 50 A normal and 55 A for ten minutes. A two-module stack is 550 mm tall and 140 kg, and a seven-module stack 1,400 mm and 440 kg, so it needs a floor. Pylontech says the ReefMagic is for homes, farms and small businesses, with self-heating available.
Both are rated IP65 and the register lists them for outdoor use. Both run from -10 to 55 °C. The battery management cuts the power back from about 40 °C up and about 10 °C down. Both warranties still exclude an outdoor install that does not avoid direct sun and frost. Both datasheets give 8,000 cycles and a 15-year design life, and neither figure is a warranty term.
Pylontech's product pages give bigger numbers than its Australian spec sheets. They print over 10,000 cycles, a 34.01 kWh usable figure for the seven-module Force-H3, and ReefMagic towers of 75 kWh and 450 kWh in parallel. The spec sheets and the register carry none of those. So this page stays with the spec sheets.
The US5000 is Pylontech's low-voltage rack battery, 4.8 kWh nominal and 4.56 kWh usable at 95% depth of discharge, with 4.8 kW of power. It is rated IP20, with no water protection, so the warranty wants it indoors or in a Pylontech-qualified outdoor enclosure. It charges from 0 to 50 °C and discharges from -10 to 50 °C. It is 442 mm wide, 420 mm deep and 161 mm tall, and weighs about 40 kg. The US5000-B is the same size and capacity.
The Fidus FB-L-5.12-B is a single unit, 5.12 kWh nominal and 4.966 kWh usable at 97% depth of discharge. It gives 2.56 kW rated and up to 5.12 kW. It is rated IP65 and C5-M for salt spray, so it can go outside. It is 638 mm wide, 137 mm deep and 370 mm tall, and weighs 45 kg. Its manual gives 8,000 cycles at 25 °C and a 10-year design life.
The Force H3X pairs with the inverter built into it. The Force-H3 and ReefMagic pair with the hybrids on Pylontech's high-voltage compatibility list, version 2.45, which gives the module count for each one. Pylontech's ReefMagic declaration names hybrid series from 39 other makers and its own FHM. Some listed codes are European or American versions. So a series on Pylontech's list is not proof that the Australian code on a quote is on the CEC register or Synergy's list.
Pylontech's own single-phase FHM-5K-HY-1P and FHM-8K-HY-1P were approved by the CEC in July 2026. Each has two MPPTs (the trackers that get the most out of each string of panels). They take up to 8 kWp and 12.8 kWp of panels (kilowatts peak, the panels' combined rated output). Backup is 5 kW and 8 kW, with a switch under 10 milliseconds. On Pylontech's list the single-phase FHM runs one to four Force-H3 modules or two to five ReefMagic modules. Pylontech's own FHM hybrids are on Synergy's list dated 30 October 2026 for battery storage under the WA Battery Scheme.
The US5000 and Fidus warranties exclude an inverter or charger that Pylontech has not certified. No Pylontech document we read lists the certified hybrids for those two. So a quote naming one needs Pylontech's confirmation in writing. The Redback G3 enclosure is one known home for the US5000. Its datasheet names it as the battery unit.
Every Pylontech battery on this page uses LFP cells. The Force H3X, Force-H3, ReefMagic and Fidus are rated IP65, and the register lists all four for outdoor use. The older three-phase Force H3X manual prints IP55, while the current spec sheet prints IP65. The US5000 is IP20 and listed for indoors.
Pylontech says the Force H3X passed unit-level UL9540A testing (a fire-safety test), has arc-fault detection and an emergency power-off. No test report we read backs that, so it stays Pylontech's word. Our product safety alerts page lists every alert we track.
Every Australian Pylontech battery warranty runs 10 years. The clock starts at the earlier of installation or six months after manufacture. For the Force H3X, Force-H3, Fidus and ReefMagic it ends sooner if a set amount of energy has passed through first. The US series and Pelio-L warranties set no such limit.
The capacity floor differs by product. The Force H3X keeps at least 70% of its usable capacity. The Force-H3 and ReefMagic keep at least 70% of their nominal energy. The Fidus, the US series and the Pelio-L keep at least 60% of nominal. The energy allowance is 3.0 MWh (3,000 kWh) per kWh of nominal energy on the Force H3X, Force-H3 and ReefMagic, at the slower charge rate the warranty names. On the Fidus it is 2.8 MWh. At the faster rate the Force H3X and Force-H3 drop to 2.8 MWh, and the Fidus to 2.5 MWh.
Four conditions matter most. The battery has to come from Pylontech or an authorised reseller in Australia and be installed here. The Force H3X, US series, Fidus and Pelio-L warranties also ask that it be used on a daily cycle basis. Missing the daily cycle, or its equivalent, is left out of the performance warranty. The Force-H3 and ReefMagic warranties ask you to tell Pylontech within 48 hours of finding a fault. You do that by the website claim form or the warranty card. Every battery-only warranty excludes an inverter Pylontech has not certified. Outdoors, the Force-H3 and ReefMagic warranties exclude an install that does not avoid direct sun and frost. The manuals go wider: the Force H3X, Force-H3 and ReefMagic manuals say to avoid frost or direct sunlight, and the Fidus manual says the install area should be protected from direct sunlight. The US series has to live indoors or in a Pylontech-qualified enclosure.
A Force H3X claim needs the warranty declaration, the invoice, the warranty card emailed to Pylontech and the system's log data. The claim goes to the local company named on that product's warranty. That is Pylontech Australia for the Force H3X, Fidus and ReefMagic, and Forte Powertech for the US series and Pelio-L. A Force-H3 claim goes to the reseller, and Forte Powertech is its importer. Their numbers are in the Support in Australia section above.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The FH3X's own inverter is on Synergy's list dated 30 October 2026, so an FH3X pairs with an inverter listed for battery storage on Synergy's list. Check the full FH3X code on your quote.
Synergy's list names inverters, not batteries. The Force H3X counts through its own built-in inverter, which the line above covers. A Force-H3, ReefMagic, US5000 or Fidus counts through the hybrid it runs on, so that hybrid's exact code is the one that counts. Our inverter library badges each model Synergy lists for the scheme. Pylontech's own FHM hybrids count the same way, and the dated line for them is in the pairing chapter above.
Pylontech's inverters on Synergy's list are not yet marked activation-ready for a Synergy VPP program (list dated 30 October 2026). A virtual power plant (VPP) lets a retailer draw on home batteries, and joining one is a condition of the WA scheme. Synergy's VPP is Battery Rewards. The scheme also accepts an alternative VPP from the battery supplier, under conditions of its own.
The rest of the scheme's rules are on our WA battery rebate page. How Synergy's list works is in our Synergy approved products guide.
Pylontech says its Australian site has an installer map under Service and Support. It says its Sydney office takes support calls on weekdays, with callers pressing 1 for the Force H3X and FHM. No Pylontech document we read names a WA distributor or a Perth stock date.
Pylontech gives a Perth home two routes. The Force H3X is one stack with the inverter built in, single-phase or three-phase, and its own inverter is what Synergy's list checks. The Force-H3, ReefMagic, US5000 and Fidus are batteries only, and each runs on a hybrid Pylontech has certified. The warranties expect daily cycling, and a Force H3X claim needs the system's log data. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The FH3X's own inverter is on Synergy's list dated 30 October 2026, so an FH3X pairs with an inverter listed for battery storage on Synergy's list. Check the full FH3X code on your quote.
Ask the installer which hybrid each Pylontech battery on the quote runs on, and for its code against Pylontech's list. Keep the invoice and the warranty card, since a claim needs them, and note which support number the card prints.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 10 years on every Australian Pylontech battery warrantyPylontech's Australian battery warranties |
|---|---|
| Batteries | LFP (lithium iron phosphate), 3.4-45 kWh usable |
| Approved now | 31 batteries and 36 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office and phone line. Contact details |
| Local support | Yes, support handled through Australian channelsSource: maker's Australian site, checked 10 May 2026Confirmed |
| CEC listings | 67 approved right now · 12 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed Pylontech inverters in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare inverters from other brands
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
31 CEC-approved batteries, 12 not currently listed · grouped into 11 series
The CEC lists each size of this product, paired with each inverter, as its own approval. Pick a size to see its full specs.
CEC model: FH3X-5K-HY-1P-5 (AS4777-2 2020) · LFP
View seriesBased on manufacturer specifications and CEC-approved configurations. Always confirm system design with your installer.
Grouped by series. Open a series for each variant, or a model for full specs.
36 CEC-approved inverters · grouped into 2 series
FH3X-10K-HY-3P-10 (AS4777-2 2020)
FH3X-10K-HY-3P-15 (AS4777-2 2020)
FH3X-10K-HY-3P-20 (AS4777-2 2020)
FH3X-10K-HY-3P-25 (AS4777-2 2020)
FH3X-10K-HY-3P-30 (AS4777-2 2020)
FH3X-10K-HY-3P-35 (AS4777-2 2020)
FH3X-12K-HY-3P-10 (AS4777-2 2020)
FH3X-12K-HY-3P-15 (AS4777-2 2020)
FH3X-12K-HY-3P-20 (AS4777-2 2020)
FH3X-12K-HY-3P-25 (AS4777-2 2020)
FH3X-12K-HY-3P-30 (AS4777-2 2020)
FH3X-12K-HY-3P-35 (AS4777-2 2020)
FH3X-15K-HY-3P-10 (AS4777-2 2020)
FH3X-15K-HY-3P-15 (AS4777-2 2020)
FH3X-15K-HY-3P-20 (AS4777-2 2020)
FH3X-15K-HY-3P-25 (AS4777-2 2020)
FH3X-15K-HY-3P-30 (AS4777-2 2020)
FH3X-15K-HY-3P-35 (AS4777-2 2020)
FH3X-5K-HY-1P-10 (AS4777-2 2020)
FH3X-5K-HY-1P-15 (AS4777-2 2020)
FH3X-5K-HY-1P-20 (AS4777-2 2020)
FH3X-5K-HY-1P-5 (AS4777-2 2020)
FH3X-6K-HY-1P-10 (AS4777-2 2020)
FH3X-6K-HY-1P-15 (AS4777-2 2020)
FH3X-6K-HY-1P-20 (AS4777-2 2020)
FH3X-8K-HY-1P-10 (AS4777-2 2020)
FH3X-8K-HY-1P-15 (AS4777-2 2020)
FH3X-8K-HY-1P-20 (AS4777-2 2020)
FH3X-8K-HY-3P-10 (AS4777-2 2020)
FH3X-8K-HY-3P-15 (AS4777-2 2020)
FH3X-8K-HY-3P-20 (AS4777-2 2020)
FH3X-8K-HY-3P-25 (AS4777-2 2020)
FH3X-8K-HY-3P-30 (AS4777-2 2020)
FH3X-8K-HY-3P-35 (AS4777-2 2020)
What has happened to Pylontech on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
US Series Launch
Low-voltage battery modules for residential applications
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
🔋 50 Battery Listings
Battery range expanded to 50 CEC-approved listings.
No, except the Force H3X, which has one built in. The Force-H3 and ReefMagic run on the hybrids on Pylontech's compatibility list, which names series from 39 other makers as well as Pylontech's own FHM. The warranties exclude a hybrid Pylontech has not certified, so the list is the check.
The one printed on the warranty that came with your battery. The Force H3X warranty prints 1300 849 234 for Pylontech Australia, the ReefMagic warranty prints 1300 086 898, and the Fidus warranty prints 1800 930 606. The Force-H3, US series and Pelio-L warranties print 1300 086 898 for the importer, Forte Powertech. Pylontech Australia's contact page gives 1800 930 606 for support.
It expects it. The Force H3X, US series, Fidus and Pelio-L warranties cover a battery used on a daily cycle basis. The Force-H3 and ReefMagic tie their energy allowance to a daily cycle. Missing the daily cycle, or its equivalent, is left out of the performance warranty. On the Force H3X, Force-H3, Fidus and ReefMagic the capacity promise also ends once the energy allowance has passed through.
The Force H3X, Force-H3, ReefMagic and Fidus are rated IP65 and listed for outdoor use. Their manuals still want a spot out of direct sun: the Force H3X, Force-H3 and ReefMagic manuals say to avoid frost or direct sunlight, and the Fidus manual asks for protection from direct sunlight. For the Force-H3 and ReefMagic it is also a warranty condition. The US5000 is IP20 and has to live indoors or in a Pylontech-qualified outdoor enclosure.
Every battery on this page is on the Clean Energy Council (CEC) register. The Force H3X builds the hybrid inverter into the battery stack, single-phase or three-phase. The Force-H3 and ReefMagic are high-voltage stacks that pair with the hybrids on Pylontech's high-voltage compatibility list, which gives the module count for each one. The US5000 is Pylontech's low-voltage rack battery. No Pylontech document we read lists the certified hybrids for the US5000 or the Fidus, so a quote naming one needs Pylontech's confirmation in writing.
Every Australian Pylontech battery warranty runs 10 years. For the Force H3X, Force-H3, Fidus and ReefMagic it ends sooner if a set amount of energy has passed through first. The Force H3X keeps at least 70% of its usable capacity. The Force-H3 and ReefMagic keep at least 70% of their nominal energy. The Fidus, the US series and the Pelio-L keep at least 60% of nominal.
Pylontech is headquartered in Shanghai, China and was founded in 2009. Its products are sold in Australia through SAA-accredited installers.
Pylontech's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Are you Pylontech?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Redback's G3 enclosure holds Pylontech US5000 units.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.