Hybrid inverter · Pylontech · CEC approved November 2025
CEC listing: FH3X-8K-HY-3P-20 (AS4777-2 2020)
An 8 kW three-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Pylontech FH3X-8K-HY-3P-20, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98% |
| European efficiency | 97.5% |
| DC input & MPPT | |
| MPPT trackers | 3 |
| Physical | |
| Weight | 300 kg |
| IP rating | IP55 |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
en.pylontech.com.cnThe Pylontech FH3X-8K-HY-3P-20 against the closest-power inverters from other brands.
| Specification | Pylontech FH3X-8K-HY-3P-20Pylontech | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | 98.0% | Not on file | Not on file |
| MPPT trackers? | 3 | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Pylontech offers a 10-year warranty covering defects in workmanship or materials for their Force H3X Series Hybrid Energy Storage System. To make a claim, retain your invoice, complete the warranty card, and submit it along with any required product data.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 18 of 18. The official install manual is the authoritative source — always confirm before acting.
E0criticalCall your installerPV overvoltage protection
E3criticalCall your installerAC overvoltage/undervoltage protection
E4criticalCall your installerAC over-frequency and under-frequency protection
F3criticalCall your installerUnrecoverable System Failures
F4criticalCall your installerUnrecoverable Critical Failures
E1warningBattery voltage overrun
E2warningCall your installerBattery not connected
FEwarningProlonged network failure
FFwarningWIFI collector communication failure
L0warningOverheating
L1warningUnder-temperature
L2warningOvervoltage
L3warningUndervoltage
L4warningCall your installerSleep
L5warningCharge overcurrent
L6warningDischarge overcurrent
E5infoAbnormal heat dissipation of the system
F2infoOther routine failures that can be recovered
FH3X-8K-HY-3P-10 (AS4777-2 2020)
8 kW · 3φ
FH3X-8K-HY-3P-15 (AS4777-2 2020)
8 kW · 3φ
FH3X-8K-HY-3P-25 (AS4777-2 2020)
8 kW · 3φ
FH3X-8K-HY-3P-30 (AS4777-2 2020)
8 kW · 3φ
FH3X-8K-HY-3P-35 (AS4777-2 2020)
8 kW · 3φ
FH3X-10K-HY-3P-10 (AS4777-2 2020)
10 kW · 3φ
Other CEC-approved products from Pylontech available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.