Batteries22 listed
- Approved models
- 16
- Usable capacity
- 5-28.8 kWh
- Pair with an inverter listed for battery storage on Synergy's list
- 8 of 22 systems
- Warranty
- 10 years · terms listed for 1 of 22 models
- Chemistry
- LFP
- Backup capable
- 1 of 22 models
GoodWe · manufacturer profile
The ESA with Lynx D G2 packs and the Lynx Home F G2 stack
Solar manufacturer
Updated 2 November 2026 · Checked against GoodWe's Australian warranties and datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
GoodWe makes its own hybrid inverters, and the two home batteries in this GoodWe battery review run on them. The ESA pairs a GoodWe power module with Lynx D G2 battery packs, and packs can be added at any time. The Lynx Home F G2 is a floor-standing stack that takes extra modules only in its first year. GoodWe Technologies in Suzhou gives the warranties, and they name GoodWe Australia Pty Ltd as the importer. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The ESA hybrid power modules (EHA and ETA codes) and the EH PLUS, EHB, ET, ET G2 and GEH hybrids a Lynx Home F pairs with were on Synergy's list dated 30 October 2026. Either battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Specifications and pricing change. Confirm them with the manufacturer.
The company
GoodWe was founded in 2010 and is headquartered in Suzhou, China. It has built hybrid inverters from the start. A hybrid inverter runs the solar panels, the battery and the house from one box. That is why both battery systems on this page are designed around a GoodWe inverter rather than sold as a box on their own.
GoodWe's 2025 sustainability report puts its staff at 4,521, with about a quarter of them in research. The same report says GoodWe has shipped more than 100 GW of solar inverters worldwide, and it names Shanghai's STAR Market as where the shares trade. The range now runs past inverters and batteries into EV chargers and solar built into roofing and cladding.
GoodWe Australia Pty Ltd of Rowville in Victoria is the importer named on both battery warranties. The warranties themselves come from GoodWe Technologies Co., Ltd in Suzhou.
Warranty claims start with your installer or the distributor who supplied the system. If they cannot resolve it, you can open a service ticket with GoodWe through the link in the warranty.
From GoodWe Australia's contact page, read 29 October 2026.
GoodWe builds the inverter, the battery and the monitoring app. The warranties on this page all come from GoodWe Technologies and all name the same importer. GoodWe says its SEMS monitoring is free, with separate logins for the owner and the installer.
The real difference between the two systems is how they grow. The ESA takes extra packs at any time, and under the warranty a pack can be added whatever its production date. The datasheet allows old and new packs, and packs of different sizes, in the same stack. The Lynx Home F G2 takes extra modules only in its first year, so its size is settled on the first quote.
The single-phase ESA also does whole-house backup without a separate gateway, GoodWe says. Its datasheet gives it an internal 63 A bypass (the path that carries grid power through the unit to the house). The switch to backup takes under 4 milliseconds.
Four GoodWe products make up the two systems on this page. All four are on the Clean Energy Council (CEC) register. The battery rows are listed until 31 December 2027. The single-phase power modules run to 25 July 2028 and the three-phase modules to 16 February 2029. The first-generation Lynx Home F left the register in November 2025. A current quote carries a code ending in -H-20.
Fanless power module, 3 kW to just under 10 kW, with a backup output of 3.0 to 10.0 kVA
CEC approved
Power module, 5 kW to just under 30 kW, with fan cooling
CEC approved
The ESA's packs: 5.0, 5.9, 8.0 or 8.85 kWh usable, IP66, floor or wall
CEC approved
Floor-standing stack of 3.2 kWh modules, 6.4 to 28.8 kWh usable
CEC approved
The ESA is GoodWe's pairing of a hybrid power module with Lynx D G2 battery packs. The power module sits on top of the packs, and the whole stack goes on a wall or the floor. The Clean Energy Council lists the two apart: the power modules on its inverter register, the packs on its battery register. Single-phase power modules run from 3 kW to just under 10 kW. Three-phase modules run from 5 kW to just under 30 kW. The register also lists AC-coupled ESA modules with BHA and BTA codes. This page does not cover them.
In a blackout, the backup output decides what keeps running. On the single-phase models it is 3.0 kVA on the smallest and 10.0 kVA on the largest (kVA is the rating the datasheet uses for backup output). The switch to backup takes under 4 milliseconds. GoodWe says the single-phase ESA backs up the whole house without a separate gateway.
Packs come in 5.0, 8.0, 5.9 and 8.85 kWh usable. The 5 and 8 kWh packs can put out their full size in kilowatts. The 6 and 9 kWh packs put out 3.0 and 4.5 kW, about half, so the pack on the quote sets how much the battery can run at once.
Packs can be added at any time, so the first quote need not be the last. On the floor the single-phase manual takes up to six packs, and the three-phase manual takes four away from the wall or six against it. A wall bracket takes three 5 or 6 kWh packs or two 8 or 9 kWh packs. A system stops at 12 packs. Mixing models or splitting a stack needs current battery software, the manual says. The packs and the single-phase module are rated IP66, which means dust-tight and protected against powerful water jets.
The smaller single-phase models have two MPPTs (the trackers that get the most out of each string of panels), and the 8 kW and larger ones have four. The single-phase module takes panels rated up to twice its own output. It has no fan, runs at 30 to 35 decibels, and starts to cut its output (derate) once the air around it passes 40 °C. The three-phase module uses a fan instead. The warranty also asks for a spot out of direct sunlight.
GoodWe's ESA datasheets headline a percentage bill saving from AI-driven energy management. They state no basis for it, so this page does not repeat it.
The Lynx Home F G2 is a floor-standing stack of 3.2 kWh LFP (lithium iron phosphate) modules. Two modules give 6.4 kWh usable and nine give 28.8 kWh. Every height stands on the same 600 by 380 mm footprint, and a full nine-module stack weighs 324 kg, so it needs a floor rather than a wall.
Its size is settled in the first year. The warranty does not allow extra modules after one year from installation, so the first quote has to cover the household it serves.
The modules recognise each other as they stack, with plug-and-play wiring between them. The inverter can diagnose and update the battery remotely, so a firmware fix need not mean a site visit. After an undervoltage shutdown the battery restarts itself.
The datasheet rates the cells at more than 4,000 cycles at 25 °C, measured down to 80% of capacity. It gives a round-trip efficiency of 94%, the share of stored energy that comes back out. Neither figure is a warranty term.
It is rated IP55 (dust-protected and protected against water jets), and the CEC register lists it for outdoor use. The warranty still asks for a spot out of direct sunlight, between -10 and 50 °C.
Yes, if it is one of the series GoodWe names. A Lynx Home F G2 runs on an EH PLUS, EHB, ET, ET G2 or GEH hybrid, from the 9.6 kWh stack up. An ESA is different: its power module is the inverter. The first packs stack under it, and the manual also allows more packs in a separate stack.
The Lynx Home F G2 pairs with GoodWe's EH PLUS, EHB, ET, ET G2 and GEH hybrids, from the 9.6 kWh stack up. No Australian GoodWe document we read pairs the smallest 6.4 kWh stack with a hybrid. The Lynx D G2 packs pair with the ESA power modules and with GoodWe storage inverters including the ET G2 and ET30.
The inverter also caps the stack. One Lynx Home F G2 stack stops at 19.2 kWh on the EH series, 22.4 kWh on EHB and 28.8 kWh on the other series. GoodWe's datasheet says EH series, and its compatibility statement places EH PLUS inside that series, so we read the 19.2 kWh cap as applying to EH PLUS.
The Lynx Home F G2 warranty expects a GoodWe inverter. Any other brand needs a compatibility check with GoodWe in advance.
Each Lynx D G2 pack carries its own battery management unit and a built-in aerosol fire extinguisher. Both batteries use LFP cells. GoodWe also says the ESA has six layers of protection from cell to system. No test report we read backs that, so it stays GoodWe's word.
Both batteries carry 10 years on the electronics and enclosure, and both promise 70% of usable capacity for 10 years. That capacity promise ends sooner if a set amount of energy has passed through first. The ESA power modules carry their own 10-year limited warranty. Ten years is also the term the federal energy department says many battery makers offer.
The energy allowance is 3.65 MWh (3,650 kWh) per usable kWh on the Lynx Home F G2, which covers one full cycle a day for all 10 years. The Lynx D G2 packs allow 3.0 MWh per kWh, which a pack cycled fully every day uses up in about 8.2 years.
Four conditions matter most. The Lynx Home F G2 needs an internet connection for monitoring, or its warranty may become void. Neither warranty covers faults or damage from exposure to sea coasts or saltwater unless GoodWe approved the site in writing before installation, so a site near the sea needs that approval first. The ESA manuals generally treat land within 500 m of the coast as a salt-damage area. Both must sit out of direct sunlight. A fault has to be reported within one month on the Lynx Home F G2 and within two weeks on the Lynx D G2.
Freight and labour are capped. In its first five years the Lynx Home F G2 warranty covers transport in some areas and may rebate on-site labour, both up to amounts GoodWe sets. After that it covers hardware only. The Lynx D G2 covers hardware throughout, with capped transport and a labour rebate at GoodWe's discretion. The ESA power module follows GoodWe's inverter warranty, which adds transport up to a set amount per case and on-site labour.
A claim goes to the installer or the distributor first, then to GoodWe as a service ticket. Each warranty carries the Australian Consumer Law guarantee statement. One gap to know about: the Lynx D G2 warranty names the G20 pack codes, while the register also lists GW5.1 and GW8.3 packs ending in G21. No GoodWe document we read says whether G21 packs are covered, so a quote naming one needs GoodWe's written answer first.
The warranty answer is 10 years, with 70% of usable capacity promised for that long, unless the energy allowance runs out first. On the Lynx Home F G2 the allowance lasts the full 10 years at one full cycle a day. On the Lynx D G2 packs it runs out after about 8.2 years at that rate. The datasheets add lab figures. The Lynx Home F G2 cells are rated at more than 4,000 cycles. The 5 and 8 kWh Lynx D G2 packs are rated at 8,000 cycles, and the 6 and 9 kWh packs at 10,000. Those come from laboratory tests and are not warranty terms.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The ESA hybrid power modules (EHA and ETA codes) and the EH PLUS, EHB, ET, ET G2 and GEH hybrids a Lynx Home F pairs with were on Synergy's list dated 30 October 2026. Either battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Synergy's list names inverters, not batteries. A GoodWe battery counts through the hybrid it is paired with. The list carries GoodWe's EH PLUS series and not the older EH. So with a Lynx Home F G2 on an EH-family inverter, the exact inverter model is the one that counts. Our inverter library badges each model Synergy lists for the scheme.
GoodWe's inverters on Synergy's list are not yet marked activation-ready for a Synergy VPP program (list dated 30 October 2026). Joining a virtual power plant (VPP) is a condition of the WA scheme. A VPP is a program that lets a retailer draw on home batteries, and Synergy's own VPP is Battery Rewards. The scheme also accepts an alternative VPP offered by the battery supplier, under conditions of its own.
The scheme's other conditions are on our WA battery rebate page. Our Synergy approved products guide explains the list itself.
Both GoodWe systems on this page run on a GoodWe hybrid inverter, so the inverter on the quote decides which battery can join it. The ESA goes on a wall or the floor and grows at any time within its stack limits. The Lynx Home F G2 stands on the floor and is sized in its first year. A home near the coast should get GoodWe's written approval for the site before installation, because both warranties exclude damage from sea exposure without it. Both batteries need a spot out of direct sun. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. The ESA hybrid power modules (EHA and ETA codes) and the EH PLUS, EHB, ET, ET G2 and GEH hybrids a Lynx Home F pairs with were on Synergy's list dated 30 October 2026. Either battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Ask the installer for the exact battery and inverter model codes. The installer's quote sets the price, and the pack count, power-module size, phase and inverter on it are the parts to check against this page.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 10 years on both batteries and on the ESA power modulesGoodWe's Australian battery and inverter warranties |
|---|---|
| Batteries | LFP (lithium iron phosphate), 5-28.8 kWh usable |
| Approved now | 16 batteries and 115 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office and phone line. Contact details |
| Local support | Yes, support handled through Australian channelsSource: Australian warranty, checked 8 Oct 2026Confirmed |
| CEC listings | 251 approved right now · 168 delisted · listed since 2014Approved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed GoodWe panels in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare panels from other brands
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
16 CEC-approved batteries, 6 not currently listed · grouped into 19 series
Based on manufacturer specifications and CEC-approved configurations. Always confirm system design with your installer.
Grouped by series. Open a series for each variant, or a model for full specs.
115 CEC-approved inverters, 114 not currently listed · grouped into 169 series · showing first 50 of 229
GEP10-1-10 (AS4777-2 2020)
GEP10-1C-30 (AS4777-2 2020)
GEP10-3-10 (AS4777-2 2020)
GEP10-3-AU10 (AS4777-2 2020)
GEP100-10 (AS4777-2 2020)
GEP110-10 (AS4777-2 2020)
GEP12-3-10 (AS4777-2 2020)
GEP120-10 (AS4777-2 2020)
GEP15-3-10 (AS4777-2 2020)
GEP20-3-10 (AS4777-2 2020)
GEP50-10 (AS4777-2 2020)
GEP60-10 (AS4777-2 2020)
GEP8-3-AU10 (AS4777-2 2020)
Compatible batteries: Lynx Home U 2.7kWh, Lynx Home F 3.2kWh
| Battery Model | Lynx Home F 3.2kWh |
|---|---|
| Charge/Discharge (kW) | 5/5 |
| Battery Model | Lynx Home F 3.2kWh |
|---|---|
| Charge/Discharge (kW) | 8/8 |
| Battery Model | Lynx Home F 3.2kWh |
|---|---|
| Charge/Discharge (kW) | 10/10 |
Compatible batteries: Lynx Home U 2.7kWh, Lynx Home F 3.2kWh
| Battery Model | Lynx Home U 2.7kWh |
|---|---|
| Charge/Discharge (kW) | 5/5 |
Understanding Power Ratings:
* DC charge/discharge power varies from AC power due to inverter efficiency. Always consult with your installer for specific system design.
Grouped by series. Open a series for each variant, or a model for full specs.
120 CEC-approved panels, 48 not currently listed · grouped into 13 series · showing first 50 of 168
BMT-P2/108A (435W) (IEC 61215-2021)
BMT-P2/108A (440W) (IEC 61215-2021)
BMT-P2/108A (505W) (IEC 61215-2021)
BMT-P2/108A (510W) (IEC 61215-2021)
BMT-P2/120A (485W) (IEC 61215-2021)
BMT-P2/120A (490W) (IEC 61215-2021)
BMT-P2/120A (560W) (IEC 61215-2021)
BMT-P2/120A (565W) (IEC 61215-2021)
BMT-P2/120A (570W) (IEC 61215-2021)
BMT-P2/132A (535W) (IEC 61215-2021)
BMT-P2/132A (540W) (IEC 61215-2021)
BMT-P2/132A(505W) (IEC 61215-2021)
BMT-P2/132A(525W) (IEC 61215-2021)
BMT-P2/132A(600W) (IEC 61215-2021)
BMT-P2/132A(605W) (IEC 61215-2021)
BMT-P2/144A (585W) (IEC 61215-2021)
BMT-P2/144A(550W) (IEC 61215-2021)
BMT-P2/144A(555W) (IEC 61215-2021)
BMT-P2/144A(570W) (IEC 61215-2021)
BMT-P2/144A(575W) (IEC 61215-2021)
BMT-P2/144A(580W) (IEC 61215-2021)
BMT-P2/144A(600W) (IEC 61215-2021)
BMT-P2/144A(605W) (IEC 61215-2021)
BMT-P2/144A(610W) (IEC 61215-2021)
BMT-P2/080A (300W)
BMT-P2/080A (305W)
BMT-P2/096A (360W)
BMT-P2/096A (365W)
BMT-P2/132A (500W)
BMT-P2/132A (505W)
BMT-P2/144A (545W)
BMT-P2/144A (550W)
BMT-P2/144A (555W)
GoodWe has been on the CEC list since 2014. It may have been in Australia earlier. Here is what has happened on the CEC register since then.
Each block is one register event. Tap a year to see its events in the list below.
First CEC listing we can see
Sourced from CEC Inverter Approvals. Earliest CEC listing we can see. The brand may have been in Australia earlier.
ACCC recall: MS-30 Solar Inverter
The AC plug does not meet the electrical safety standard: it can be removed without a tool, which could expose live terminals.
☀️ 50 Panel Models Listed
Panel range expanded to 50 CEC-approved models.
ACCC recall update: MS-30 Solar Inverter
Status: still active
☀️ 100 Panel Models Listed
Panel range expanded to 100 CEC-approved models.
ACCC recall: EHB & GEH Series Solar Inverters
When the bypass switch is in the bypass position and the inverter is in backup mode, the inverter can export power to the grid through the bypass switch. If the grid is down (an islanding situation), this is a serious safety hazard with a risk of electric shock.
Yes. Under the Lynx D G2 warranty, packs can be added whatever their production date, and the datasheet allows old and new packs, and different sizes, in one stack. The Lynx Home F G2 is different: its warranty allows extra modules only in the first year after installation.
Your installer or the distributor first. If they cannot resolve it, you can open a service ticket with GoodWe through the link in the warranty. GoodWe Australia's tech support line and service email are on its Australian website.
The Lynx D G2 packs are rated IP66 and the Lynx Home F G2 IP55, and the CEC register lists both for outdoor use. Both warranties still require a spot out of direct sunlight, and a site near the sea should have GoodWe's written approval before installation.
The warranty promises 70% of usable capacity for 10 years, or until the energy allowance is used up. At one full cycle a day the Lynx Home F G2 allowance lasts the full 10 years and the Lynx D G2 allowance about 8.2 years. In lab tests the cells are rated at more than 4,000 cycles (Lynx Home F G2) and 8,000 to 10,000 cycles (Lynx D G2).
No. The first Lynx Home F left the CEC register in November 2025. A current quote carries a G2 code ending in -H-20. The register still lists other GoodWe batteries, the Lynx U G3 and LX U5.4-20 among them. GoodWe publishes Australian datasheets and warranties for those two, and this page does not cover them.
GoodWe is headquartered in Suzhou, China and was founded in 2010. Its products are sold in Australia through SAA-accredited installers.
GoodWe's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 16 CEC-approved GoodWe battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
Are you GoodWe?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.