Enphase · manufacturer profile

Enphase battery review

The IQ Battery 5P with FlexPhase and the original 5P

Inverter manufacturer

Updated 2 November 2026 · Checked against Enphase's Australian warranty and datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth

In short

Enphase puts the inverter inside the battery. Each 5 kWh IQ Battery 5P carries six microinverters. So it joins on the household side of the wiring. The FlexPhase model is set on site for single-phase or three-phase supply, and the original 5P is single-phase only. Both carry a 15-year warranty, or 6,000 cycles if that comes first. At year 10 the promise is 70% of capacity, for batteries activated on or after 15 June 2025. Enphase Energy in California stands behind that warranty, with an importer in South Melbourne. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.

Specifications and pricing change. Confirm them with the manufacturer.

  • 2006Founded
  • 25Products on the CEC list today
On this page

The company

About Enphase

Enphase says it was founded in 2006, and that its shares trade on the NASDAQ as ENPH. Its business is the microinverter: a small inverter that sits at one solar panel and turns that panel's power into household power. The IQ Battery is that idea moved into a battery box, with six microinverters built in.

On the roof, Enphase says, one microinverter per panel means each panel works on its own, and production carries on if one fails. It says rapid shutdown is built in, so the roof's solar can be switched off in an emergency. The Clean Energy Council (CEC) register carries Enphase's IQ7, IQ8 and IQ9N microinverters, the newest approved in March 2026.

In Australia, Enphase Energy Aust. Pty Ltd in South Melbourne is the importer named on the battery warranty. The warranty itself comes from Enphase Energy, Inc. in Fremont, California, the maker. A claim goes through Enphase's returns process.

Support in Australia

A warranty claim goes through Enphase's returns process (its RMA procedure), during the warranty period and within 90 days of finding the fault.

From Enphase's Australian battery warranty, effective 15 June 2025, read 8 October 2026.

What's different about Enphase?

An Enphase battery brings its own inverters. Six sit inside each 5 kWh unit, IQ8T-BAT in the FlexPhase and IQ8D-BAT in the original.

The Enphase range

Two batteries, a controller and the microinverters make up the Enphase range on this page. The IQ Battery 5P with FlexPhase covers ten listed models, on the CEC register to 31 December 2027. The original IQ Battery 5P is listed to 13 December 2026. No Enphase AC Battery is on the register.

  • IQ Battery 5P with FlexPhase

    5 kWh usable, LFP (lithium iron phosphate); 1.65 to 3.84 kVA single-phase or 1.84 to 3.84 kVA three-phase, set on site; any rating other than 3.84 kVA needs at least two batteries to comply with AS/NZS 4777.2

    CEC approved

  • IQ Battery 5P

    5 kWh usable, LFP; six IQ8D-BAT microinverters; 3.84 kVA, single-phase

    CEC listed to 13 December 2026

  • IQ System Controller 3 INT

    Needed for backup on both; the original 5P needs it for grid-tied running too

    Sold as its own unit

  • IQ microinverters

    IQ7, IQ8 and IQ9N families on the register, listed to dates from December 2026 to March 2029

    CEC approved

What is the IQ Battery 5P with FlexPhase?

The FlexPhase unit holds 5.0 kWh usable. That figure already allows a 2% safety limit, and a further 3% is held back at night to keep the battery's electronics running.

How does the original IQ Battery 5P work?

The original 5P is the single-phase unit, with six grid-forming IQ8D-BAT microinverters and the same 5.0 kWh of LFP cells. All of it is usable at 100% depth of discharge (the share of the battery that can be drained).

Which Enphase parts go with the battery?

Three parts sit around the battery on an Enphase quote. The IQ System Controller 3 INT handles backup on both batteries, and everyday running on the original 5P.

How safe are Enphase batteries?

Both batteries use LFP cells. Enphase says IQ Batteries run on low-voltage DC and avoid the dangers of high-voltage DC. It also says they meet the performance criteria of UL 9540A, a unit-level test of whether fire spreads inside a wall-mounted home battery. No test report we read backs either claim, so both stay Enphase's word. On the roof, Enphase says, its IQ microinverters have rapid shutdown built in.

What does the Enphase warranty cover in Australia?

Both batteries carry 15 years from the activation date, or 6,000 discharged cycles, whichever comes first. Activation is the earlier of registering the battery with Enphase or switching it on through the installer portal.

Does an Enphase battery qualify for the WA battery rebate?

Showing: Western Australia, Synergy network. Other states: not covered yet

A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.

Synergy's list names inverters. For an Enphase battery, the inverters are the six microinverters inside the unit.

Where Enphase fits in WA

An Enphase battery carries its own inverters, so it joins on the household side of the wiring beside solar that is already there. The FlexPhase unit is set on site for single-phase or three-phase supply, and the original 5P is single-phase. Both are 5 kWh units, so a bigger store means more units. In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. The warranty runs 15 years from activation, with the battery online and bought from an authorised reseller. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.

A good fit if

  • Your quote names the IQ Battery 5P with FlexPhase and says which supply, single or three-phase, it is set for
  • Your roof already runs Enphase IQ Series microinverters
  • Backup matters and the quote carries an IQ System Controller 3 INT as its own line

Might not suit you if

  • You need more than 3.84 kVA of continuous output from one unit
  • The battery would sit offline for long stretches (the warranty asks for a continuous internet connection)
  • Your budget counts on the WA Battery Scheme rebate, and the Synergy line above is the current answer

Ask where the installer buys the battery, and get the answer in writing. The warranty covers only batteries sold by Enphase or an Enphase-authorised reseller. Get the model code on the quote. If backup matters, agree which circuits stay on in a blackout.

Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.

For checking

Key facts

Warranty15 years from activation or 6,000 discharged cycles, whichever comes first, on both batteriesEnphase's Australian storage warranty, effective 15 June 2025
BatteriesLFP (lithium iron phosphate), 5 kWh usable
Approved now2 batteries and 23 inverters on the CEC (Clean Energy Council) register
Support in AustraliaOffice and phone line. Contact details
Local supportYes, support handled through Australian channelsSource: maker's Australian site, checked 8 May 2026Confirmed
CEC listings25 approved right now · 10 delistedApproved
Documents

Everything on the CEC register

Enphase by product type

Each product type at a glance. The full lists, grouped by series, are below.

Enphase full lists, by product type

Pick a type to open its full list, grouped by series.

Market timeline

What has happened to Enphase on the CEC register.

Approved right now
252 batteries · 23 inverters
Delisted
10Of 35 ever listed
Safety notices
0None on our record

Events on the register, by year

  • Approval or launch
  • Safety
  • Other

Each block is one register event. Tap a year to see its events in the list below.

Key moments

2 of 19 events
  1. 2020

    IQ Battery Launch in Australia

    AC-coupled modular battery system with microinverter integration

    Approval
  2. 2025

    ⚡ 20 Inverter Models Listed

    Inverter range expanded to 20 CEC-approved models.

    Approval

Questions about Enphase

About Enphase

Can I add a second Enphase battery later?

Enphase says yes: a home can start small and add IQ Batteries as its needs grow. Each unit is 5 kWh. In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. So ask the installer what a second unit involves.

Does an Enphase battery need the IQ System Controller?

The original 5P needs the IQ System Controller 3 INT for everyday grid-tied running and for backup. The FlexPhase needs it for backup only. It is sold as its own unit, so look for it as a line on the quote.

Does the Enphase battery need internet?

Yes, for the warranty. The battery should stay online for the whole 15 years. A break outside your control does not count against you. The term starts on the activation date: when the battery is registered with Enphase, or switched on through the installer portal, whichever is earlier.

Can an Enphase battery go outside in Perth?

Both are IP55 (dust-protected and protected against water jets). The FlexPhase is rated for indoor or outdoor use and the original 5P for outdoor. Charging slows above 45 °C on the FlexPhase, and both discharge up to 55 °C. Enphase's IQ Battery 5P quick install guide, citing AS/NZS 5139, asks for a well-ventilated location out of direct sunlight.

Where is Enphase based?

Enphase is headquartered in Fremont, California, USA and was founded in 2006. Its products are sold in Australia through SAA-accredited installers.

Batteries

What battery chemistry does Enphase use?

Enphase's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.

How many Enphase batteries can I compare on Solar Battery Perth?

Solar Battery Perth lists 2 CEC-approved Enphase battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.

Inverters

What Enphase inverters are on the CEC register?

Enphase has 23 CEC-approved inverter models from 0.3-3.8 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.

Sources

Are you Enphase?

Help us keep this profile up to date.

Get in touch

Where next

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.