Hybrid inverter · SolarEdge · CEC approved February 2025
CEC listing: SE8.25K-AUB (AS4777-2 2020)
An 8.3 kW three-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the SolarEdge SE8.25K-AUB, by section.
| Specification | Value |
|---|---|
| Physical | |
| Dimensions (H×W×D) | 317 × 550 × 273 mm |
| IP rating | IP65 |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Cable gauge | 50 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.solaredge.com/ausThe SolarEdge SE8.25K-AUB against the closest-power inverters from other brands.
| Specification | SolarEdge SE8.25K-AUBSolarEdge | SolarEdge SE8.25KSolarEdge | SolarEdge SE8250HSolarEdge |
|---|---|---|---|
| Rated power? | 8.25 kW | 8.25 kW | 8.25 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Single-phase |
| Type | Hybrid | Solar | Hybrid |
| Battery ready | Yes | No | Yes |
| Warranty | 20 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
SolarEdge offers a 12-year warranty on inverters, covering defects in workmanship and materials. Exclusions include misuse, unauthorized modifications, and damage due to external factors. To make a claim, contact SolarEdge with the product serial number and purchase receipt.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.
1Dx7DcriticalCall your installerHigh battery voltage
1Dx89criticalCall your installerInternal DC power connection error
1Dx8AcriticalCall your installerHigh DC voltage fault
1Dx8DcriticalCall your installerHigh battery voltage
1DxA0criticalCall your installerBattery error
1Dx7EwarningCall your installerLow battery voltage
1Dx88warningCall your installerInternal communication error
1Dx8EwarningCall your installerLow battery voltage
1Dx9FwarningCall your installerBattery communication error
1DxA2warningCall your installerOperation conditions verification failed
1DxA1infoBattery not selected
SE7K-AUB (AS4777-2 2020)
7 kW · 3φ
SE10K-RWB48 (AS4777-2 2020)
10 kW · 3φ
SE10K-AUB (AS4777-2 2020)
10 kW · 3φ
SE5K-AUB (AS4777-2 2020)
5 kW · 3φ
SE15K (AS4777-2 2020)
15 kW · 3φ
SE17K (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from SolarEdge available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.