Loading Solar Battery Perth...

Hybrid inverter · SolarEdge · Three Phase Inverter series · CEC approved February 2025

SolarEdge SE7K-AUB

CEC listing: SE7K-AUB (AS4777-2 2020)

A 7 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,325; Estimate for the inverter alone — your quote will vary
Rated power: 7kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Three Phase Inverter series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 7kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long SolarEdge Technologies Ltd stands behind it: 20yr

Full datasheet

Every figure on file for the SolarEdge SE7K-AUB, by section.

Full datasheet, by section
Specification	Value
Physical
Dimensions (H×W×D)	317 × 550 × 273 mm
IP rating	IP65
Installation requirements
Cable gauge	50 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

26 Feb 2025

Approval expiry

17 Dec 2026

Status

Active

Eligible for rebates

Yes

About SolarEdge Technologies Ltd

Years in AU Market

15 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,450–$4,200

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 29.8 kWh
Annual yield: 10,859 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.solaredge.com/aus

15 years in Australian market

How it compares

The SolarEdge SE7K-AUB against the closest-power inverters from other brands.

Specification	SolarEdge SE7K-AUBSolarEdge	Energizer Force 7.0HS+Energizer	Energizer Force 7.0SEnergizer

Rated power?	7 kW	7 kW	7 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Single-phase	Single-phase
Type	Hybrid	Hybrid	Solar
Battery ready	Yes	Yes	No
Warranty	20 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

20-year inverter warranty

SolarEdge SE7K-AUB

SolarEdge offers a 12-year warranty on inverters, covering defects in workmanship and materials. Exclusions include misuse, unauthorized modifications, and damage due to external factors. To make a claim, contact SolarEdge with the product serial number and purchase receipt.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Misuse, abuse, negligence, unauthorized modifications, use with non-permitted equipment, failure to observe safety regulations, and damage from events beyond control (e.g., floods, lightning) can void warranty.

Read the official warranty document (PDF)

Fault & error codes — SolarEdge SE7K-AUB

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

1Dx7DcriticalCall your installer
Manual (PDF)
High battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx89criticalCall your installer
Manual (PDF)
Internal DC power connection error
Likely cause
Verify that the connection between the DCDC PCB and the inverter PCB is connected as required.
What to do
Inspect and secure the internal DC connections.
1Dx8AcriticalCall your installer
Manual (PDF)
High DC voltage fault
Likely cause
Verify that the connection between the DCDC PCB and the inverter PCB is connected as required and check for short in string-inverter power connection.
What to do
Investigate DC voltage levels and ensure proper connections.
1Dx8DcriticalCall your installer
Manual (PDF)
High battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1DxA0criticalCall your installer
Manual (PDF)
Battery error
Likely cause
Call battery vendor support.
What to do
Contact battery vendor for support.
1Dx7EwarningCall your installer
Manual (PDF)
Low battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx88warningCall your installer
Manual (PDF)
Internal communication error
Likely cause
Verify that the RS485 connector on the communication board is connected as required.
What to do
Check connections and ensure they are secure.
1Dx8EwarningCall your installer
Manual (PDF)
Low battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx9FwarningCall your installer
Manual (PDF)
Battery communication error
Likely cause
Verify that the CAN connectors are connected as required.
What to do
Inspect CAN communication connections.
1DxA2warningCall your installer
Manual (PDF)
Operation conditions verification failed
Likely cause
Verify that the battery is connected to the inverter as required, battery voltage is within range and the battery is enabled.
What to do
Check battery conditions and settings.
1DxA1info
Manual (PDF)
Battery not selected
Likely cause
Configure battery as required.
What to do
Complete battery configuration in the inverter settings.

Part of the SolarEdge Three Phase Inverter series

Compare every SolarEdge Three Phase Inverter variant side by side →

More SolarEdge Technologies Ltd Inverters

SE10K-RWB48 (AS4777-2 2020)

10 kW · 3φ

PCS050BA (AS4777-2 2020)

49.9 kW · 3φ

SE10000H (AS4777-2 2020)

10 kW · 1φ

SE10000H-MM (AS4777-2 2020)

10 kW · 1φ

SE100K (AS4777-2 2020)

100 kW · 3φ

SE10K (AS4777-2 2020)

10 kW · 1φ

View all SolarEdge Technologies Ltd inverters

More from SolarEdge Technologies Ltd

Other CEC-approved products from SolarEdge Technologies Ltd available in Australia.

SolarEdge Technologies Ltd Batteries

BAT-05K48

4.85 kWh · LFP

BAT-10K1P

9.7 kWh · LFP

CSS-OU-090

85.12 kWh · LFP

View all SolarEdge Technologies Ltd batteries

SolarEdge Technologies Ltd Solar Panels

SPV370-R60JWMG

370W · 18.9% · Mono PERC

SPV375-R60JWMG

375W · 19.2% · Mono PERC

SPV410-R54JWML

410W · 21.0% · Mono PERC

SPV415-R54JWML

415W · 21.3% · Mono PERC

View all SolarEdge Technologies Ltd panels

View full SolarEdge Technologies Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · SolarEdge · Three Phase Inverter series · CEC approved February 2025

SolarEdge SE7K-AUB

CEC listing: SE7K-AUB (AS4777-2 2020)

A 7 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,325; Estimate for the inverter alone — your quote will vary
Rated power: 7kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Three Phase Inverter series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 7kW
Phases Needs a three-phase supply — check your switchboard: 3-phase
Type Runs solar and a battery from one unit: Hybrid
Warranty How long SolarEdge Technologies Ltd stands behind it: 20yr

Full datasheet

Every figure on file for the SolarEdge SE7K-AUB, by section.

Full datasheet, by section
Specification	Value
Physical
Dimensions (H×W×D)	317 × 550 × 273 mm
IP rating	IP65
Installation requirements
Cable gauge	50 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

26 Feb 2025

Approval expiry

17 Dec 2026

Status

Active

Eligible for rebates

Yes

About SolarEdge Technologies Ltd

Years in AU Market

15 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,450–$4,200

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 29.8 kWh
Annual yield: 10,859 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.solaredge.com/aus

15 years in Australian market

How it compares

The SolarEdge SE7K-AUB against the closest-power inverters from other brands.

Specification	SolarEdge SE7K-AUBSolarEdge	Energizer Force 7.0HS+Energizer	Energizer Force 7.0SEnergizer

Rated power?	7 kW	7 kW	7 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Three-phase	Single-phase	Single-phase
Type	Hybrid	Hybrid	Solar
Battery ready	Yes	Yes	No
Warranty	20 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

20-year inverter warranty

SolarEdge SE7K-AUB

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Misuse, abuse, negligence, unauthorized modifications, use with non-permitted equipment, failure to observe safety regulations, and damage from events beyond control (e.g., floods, lightning) can void warranty.

Read the official warranty document (PDF)

Fault & error codes — SolarEdge SE7K-AUB

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

1Dx7DcriticalCall your installer
Manual (PDF)
High battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx89criticalCall your installer
Manual (PDF)
Internal DC power connection error
Likely cause
Verify that the connection between the DCDC PCB and the inverter PCB is connected as required.
What to do
Inspect and secure the internal DC connections.
1Dx8AcriticalCall your installer
Manual (PDF)
High DC voltage fault
Likely cause
Verify that the connection between the DCDC PCB and the inverter PCB is connected as required and check for short in string-inverter power connection.
What to do
Investigate DC voltage levels and ensure proper connections.
1Dx8DcriticalCall your installer
Manual (PDF)
High battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1DxA0criticalCall your installer
Manual (PDF)
Battery error
Likely cause
Call battery vendor support.
What to do
Contact battery vendor for support.
1Dx7EwarningCall your installer
Manual (PDF)
Low battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx88warningCall your installer
Manual (PDF)
Internal communication error
Likely cause
Verify that the RS485 connector on the communication board is connected as required.
What to do
Check connections and ensure they are secure.
1Dx8EwarningCall your installer
Manual (PDF)
Low battery voltage
Likely cause
Verify that the battery is connected to the inverter as required.
What to do
Check battery connection and ensure it is within the specified voltage range.
1Dx9FwarningCall your installer
Manual (PDF)
Battery communication error
Likely cause
Verify that the CAN connectors are connected as required.
What to do
Inspect CAN communication connections.
1DxA2warningCall your installer
Manual (PDF)
Operation conditions verification failed
Likely cause
Verify that the battery is connected to the inverter as required, battery voltage is within range and the battery is enabled.
What to do
Check battery conditions and settings.
1DxA1info
Manual (PDF)
Battery not selected
Likely cause
Configure battery as required.
What to do
Complete battery configuration in the inverter settings.

Part of the SolarEdge Three Phase Inverter series

Compare every SolarEdge Three Phase Inverter variant side by side →

More SolarEdge Technologies Ltd Inverters

SE10K-RWB48 (AS4777-2 2020)

10 kW · 3φ

PCS050BA (AS4777-2 2020)

49.9 kW · 3φ

SE10000H (AS4777-2 2020)

10 kW · 1φ

SE10000H-MM (AS4777-2 2020)

10 kW · 1φ

SE100K (AS4777-2 2020)

100 kW · 3φ

SE10K (AS4777-2 2020)

10 kW · 1φ

View all SolarEdge Technologies Ltd inverters