Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · Sigenergy · Sigen PV Inverter series · CEC approved January 2026
CEC listing: Sigen PV 50M1-AU (AS4777-2 2020)
A 50 kW three-phase solar inverter.
Commercial-scale inverter
At 50 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Needs a three-phase supply — check your switchboard
Type
Runs solar only
Every figure on file for the Sigenergy Sigen PV 50M1-AU, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Cable gauge | 6 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
No
Backup capable
No
CEC approved
29 Jan 2026
Approval expiry
29 Jan 2029
Status
Active
Eligible for rebates
Yes
Years in AU Market
3 years
Australian Office
Yes
CEC-Approved Batteries
2118
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$10,000–$20,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Australian office
Has local presence
Website
www.sigenergy.com/auThe Sigenergy Sigen PV 50M1-AU against the closest-power inverters from other brands.
| Specification | Sigenergy Sigen PV 50M1-AUSigenergy | Solplanet ASW50K-LT-G3Solplanet | Alpha ESS M50-INV-AUAlpha ESS |
|---|---|---|---|
| Rated power? | 50 kW | 50 kW | 50 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Solar | Hybrid |
| Battery ready | No | No | Yes |
| Warranty | 0 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Plain-English warranty summary not yet extracted for this product. The official warranty document is the authoritative source.
Part of the Sigenergy Sigen PV Inverter series
Compare every Sigenergy Sigen PV Inverter variant side by side →
Sigen Hybrid 10.0 SP AU (AS4777-2 2020)
9.999 kW · 1φ
Sigen Hybrid 10.0 TP AU (AS4777-2 2020)
9.999 kW · 3φ
Sigen Hybrid 12.0 SP AU (AS4777-2 2020)
12 kW · 1φ
Sigen Hybrid 12.0 TP AU (AS4777-2 2020)
12 kW · 3φ
Sigen Hybrid 15.0 TP AU (AS4777-2 2020)
15 kW · 3φ
Sigen Hybrid 17.0 TP AU (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from Sigenergy Technology Co Ltd available in Australia.
SigenStack M2-0.5C-20/241.15 kWh
234 kWh · LFP
SigenStack M2-0.5C-21/253.21 kWh
245.7 kWh · LFP
SigenStack M2-0.5C-22/265.27 kWh
257.4 kWh · LFP
SigenStack M2-0.5C-23/277.32 kWh
269.1 kWh · LFP
SigenStack M2-0.5C-24/289.38 kWh
280.8 kWh · LFP
SigenStack M2-0.5C-25/301.44 kWh
292.5 kWh · LFP
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.