Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · Sigenergy · Sigen Hybrid Inverter series · CEC approved April 2025
CEC listing: Sigen Hybrid 30.0 TP AU (AS4777-2 2020)
A 30 kW three-phase solar inverter.
Sigenergy's SigenStor is a newer entrant offering an integrated inverter-battery design and a modern industrial-design aesthetic. Smart energy management features are part of the product proposition. For Perth installs, Sigenergy gives buyers a design-led alternative to established brands. As a recent arrival, verify installer experience and long-term support before specifying.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Needs a three-phase supply — check your switchboard
Type
Runs solar only
Warranty
How long Shanghai SIGEN New Energy Technology Co Ltd stands behind it
Every figure on file for the Sigenergy Sigen Hybrid 30.0 TP AU, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98% |
| European efficiency | 97% |
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
No
Backup capable
No
CEC approved
7 Apr 2025
Approval expiry
7 Apr 2028
Status
Active
Eligible for rebates
Yes
Years in AU Market
3 years
Australian Office
Yes
CEC-Approved Batteries
2118
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$6,000–$12,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Australian office
Has local presence
Website
www.sigenergy.com/auThe Sigenergy Sigen Hybrid 30.0 TP AU against the closest-power inverters from other brands.
| Specification | Sigenergy Sigen Hybrid 30.0 TP AUSigenergy | GoodWe GW29.999K-BTA-G20GoodWe | GoodWe GW29.999K-ETA-G20GoodWe |
|---|---|---|---|
| Rated power? | 29.999 kW | 29.999 kW | 29.999 kW |
| Max efficiency? | 98.0%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Battery | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for five years. It excludes damage from improper installation, external environmental factors, and modifications, among others. To make a claim, contact your installer or sales representative.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Sigenergy Sigen Hybrid Inverter series
Compare every Sigenergy Sigen Hybrid Inverter variant side by side →
Sigen Hybrid 10.0 SP AU (AS4777-2 2020)
9.999 kW · 1φ
Sigen Hybrid 10.0 TP AU (AS4777-2 2020)
9.999 kW · 3φ
Sigen Hybrid 12.0 SP AU (AS4777-2 2020)
12 kW · 1φ
Sigen Hybrid 12.0 TP AU (AS4777-2 2020)
12 kW · 3φ
Sigen Hybrid 15.0 TP AU (AS4777-2 2020)
15 kW · 3φ
Sigen Hybrid 17.0 TP AU (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from Shanghai SIGEN New Energy Technology Co Ltd available in Australia.
SigenStack M2-0.5C-20/241.15 kWh
234 kWh · LFP
SigenStack M2-0.5C-21/253.21 kWh
245.7 kWh · LFP
SigenStack M2-0.5C-22/265.27 kWh
257.4 kWh · LFP
SigenStack M2-0.5C-23/277.32 kWh
269.1 kWh · LFP
SigenStack M2-0.5C-24/289.38 kWh
280.8 kWh · LFP
SigenStack M2-0.5C-25/301.44 kWh
292.5 kWh · LFP
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.