Sigenergy · manufacturer profile

Sigenergy battery review

The SigenStor stack that replaces the inverter

Solar manufacturer

Updated 2 November 2026 · Checked against Sigenergy's Australian datasheets and warranty, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth

In short

A SigenStor is one stack. The Sigen Energy Controller on top does the inverter's job. Sigenergy's battery datasheets put one to six modules beneath it. The current modules hold 6.0 or 9.0 kWh usable, and Sigenergy puts a stack at 6 to 54 kWh. An optional module charges an electric car from the same tower. The 10-year warranty on the battery and controller depends on staying online, and more than a year offline cuts it to 5 years. Sigenergy Australia Pty Ltd in North Sydney is the importer a warranty claim reaches. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Synergy's list dated 30 October 2026 names SigenStor controllers and complete systems by model, so a SigenStor on a listed model pairs with an inverter listed for battery storage on Synergy's list.

Specifications and pricing change. Confirm them with the manufacturer.

  • 2022Founded
  • 2024First CEC-approved products
  • 2,230Products on the CEC list today
On this page

The company

About Sigenergy

Sigenergy is young, and Australia has carried much of its short history. It was founded in Shanghai in May 2022 and unveiled the SigenStor in June 2023. Its 2026 listing prospectus puts Australia at none of its revenue in 2023, 15.4% in 2024 and 42.6% in 2025. The same filing counts 1,597 full-time staff at the end of 2025, with 605 of them in research and development.

The prospectus set 16 April 2026 as the expected first day of trading for its shares in Hong Kong, under stock code 6656. Sigenergy sells mainly through distributors, who supply the installers that fit its systems. At the end of 2025 it counted 172 distributors in 85 countries and regions, and 17,614 registered installers worldwide. No Sigenergy document we read gives an Australian installer count.

In Australia, Sigenergy Australia Pty Ltd in North Sydney is the importer named in the Australian and New Zealand warranty. It is the company a warranty claim reaches.

Support in Australia

A fault is reported within 30 days of the failure, through the mySigen app first. If the app is unavailable, the claim goes through the installer or Sigenergy's national office.

From Sigenergy Australia's contact page, read 5 October 2026.

What's different about a SigenStor?

There is no separate inverter box on the wall. The Sigen Energy Controller on top of the stack is the inverter, the box that turns panel and battery power into household power.

The Sigenergy range

Every SigenStor module, controller and SigenStack on this page is on the Clean Energy Council (CEC) register in our 20 October 2026 snapshot. The first SigenStor systems were approved on 5 June 2024. The builds made only from the current 6.0 and 9.0 kWh modules were approved on 16 April 2026. The earlier 5.2 and 7.8 kWh builds were approved between June 2024 and September 2025 and stay listed into 2027, so they still turn up on quotes. Our read of the council's suspension and de-listing tables on 5 October 2026 found no Sigenergy product on either.

  • SigenStor BAT 6.0

    Current module, 6.0 kWh usable, 3.0 kW charge or discharge, 62 kg, IP66

    CEC approved

  • SigenStor BAT 10.0

    Current module, 9.0 kWh usable, 4.6 kW charge or discharge, 78 kg, IP66

    CEC approved

  • SigenStor BAT 5.0 and BAT 8.0

    Earlier modules, 5.2 and 7.8 kWh usable, 2.5 and 4.0 kW, still on the register

    CEC approved, listed into 2027

  • Sigen Energy Controller

    The stack's inverter, 3 to 12 kW single-phase or 5 to 30 kW three-phase

    CEC approved

  • Sigen EV DC Charging Module

    12.5 kW or 25 kW car charging from the stack

    In Sigenergy's Australian brochure

  • Sigen Energy Gateway

    The separate unit that gives the stack blackout backup, and lets more than one stack run on a home

    In Sigenergy's Australian brochure

  • SigenStack

    Sigenergy's larger system, listed from 46.8 kWh usable

    CEC approved 17 February 2026

How does a SigenStor work for a Perth home?

The modules set how much the stack holds and how much it can run at once. Each 6.0 kWh module supplies up to 3.0 kW, and each 9.0 kWh module up to 4.6 kW.

Which SigenStor modules run on which controller?

The module generation decides it. The earlier 5.2 and 7.8 kWh modules run on the SigenStor controller.

What keeps a SigenStor safe?

Every SigenStor module uses LFP cells, and the register says the same. The modules are rated IP66 and work in ambient heat up to 55°C. Sigenergy's Australian brochure lists five layers of battery protection: cell-level temperature monitoring, an internal fire extinguishing kit, heat-resistant and aerogel insulating pads, and a decompression valve. No datasheet we read gives a fire test result.

What does the Sigenergy warranty cover in Australia?

The battery modules and the controller carry 10 years, and the car-charging module 3 years. The years start at installation and registration, or 180 days after the factory shipped the unit if that comes first.

Does a SigenStor qualify for the WA battery rebate?

Showing: Western Australia, Synergy network. Other states: not covered yet

A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Synergy's list dated 30 October 2026 names SigenStor controllers and complete systems by model, so a SigenStor on a listed model pairs with an inverter listed for battery storage on Synergy's list.

Synergy's list names inverters, not batteries. With a SigenStor, the controller is the inverter, so the controller or complete-system code on the quote is what to check.

Where Sigenergy fits in WA

A SigenStor puts the inverter's job inside the battery stack, so a Perth home replacing an old inverter or building a new system adds no second box. Storage is chosen in 6.0 or 9.0 kWh modules, from 6 to 54 kWh in one stack, and an optional module charges the car from the same tower. The modules are rated IP66 and work up to 55°C, so a sheltered outside wall is within their rating. Blackout backup needs a separate Sigen Energy Gateway. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Synergy's list dated 30 October 2026 names SigenStor controllers and complete systems by model, so a SigenStor on a listed model pairs with an inverter listed for battery storage on Synergy's list.

A good fit if

  • Your quote names a SigenStor controller and the modules, each by model code
  • You want storage chosen in 6.0 or 9.0 kWh steps, from 6 to 54 kWh in one stack
  • You plan to charge an electric car from the same stack

Might not suit you if

  • Your home internet is unreliable, since more than a year offline cuts the warranty to 5 years
  • You want a battery that runs on another maker's inverter
  • You want blackout backup without a separate Gateway on the quote

Get the exact controller or complete-system code in writing, and ask which module generation the quote pairs with it. The installer's quote sets the price, and the module count, controller size and Gateway on it are the parts to check against this page.

Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.

For checking

Key facts

Warranty10 years on the battery modules and controller, 3 years on the car-charging moduleSigenergy's Australian and New Zealand warranty
BatteriesLFP (lithium iron phosphate), 5.2-50 kWh usable
Approved now107 batteries and 2,123 inverters on the CEC (Clean Energy Council) register
Support in AustraliaOffice. Contact details
Local supportYes, support handled through Australian channelsSource: Australian warranty, checked 5 Oct 2026Confirmed
CEC listings2,230 approved right now · 0 delistedApproved
Documents

Everything on the CEC register

Sigenergy by product type

Each product type at a glance. The full lists, grouped by series, are below.

Batteries107 listed

Approved models
107
Usable capacity
5.2-50 kWh
Pair with an inverter listed for battery storage on Synergy's list
106 of 107 systems
Warranty
10 years · terms listed for 1 of 107 models
Chemistry
LFP
Backup capable
1 of 107 models

Inverters2,123 listed

Approved models
2,123
Power range
3-125 kW
Hybrid models
2,098 of 2123
Phases
1,271 single phase · 852 three phase
Inverter types
2,098 hybrid · 25 standard

Sigenergy full lists, by product type

Pick a type to open its full list, grouped by series.

Market timeline

What has happened to Sigenergy on the CEC register.

Approved right now
2,230107 batteries · 2,123 inverters
Delisted
0Of 2,230 ever listed
Safety notices
1Open, 2025. Details in the review above

Events on the register, by year

  • Approval or launch
  • Safety
  • Other

Each block is one register event. Tap a year to see its events in the list below.

Key moments

6 of 17 events
  1. 2024

    First CEC Approval

    Received initial Clean Energy Council certification.

    Approval
  2. 2025

    🔋 250 Battery Listings

    Battery range expanded to 250 CEC-approved listings.

    Approval
  3. 2025

    ACCC recall: SigenStor Energy Controllers

    The AC plugs on these controllers, which use a quick connect that needs ferrules and crimping, may overheat and become damaged, which is a fire risk. Incidents have occurred, with no property damage, injuries or deaths reported.

    Safety
  4. 2026

    🔋 2000 Battery Listings

    Battery range expanded to 2000 CEC-approved listings.

    Approval
  5. 2026

    🔋 1000 Battery Listings

    Battery range expanded to 1000 CEC-approved listings.

    Approval
  6. 2026

    🔋 500 Battery Listings

    Battery range expanded to 500 CEC-approved listings.

    Approval

Questions about Sigenergy

About Sigenergy

Is Sigenergy a Chinese company?

Yes. Sigenergy was founded in Shanghai in May 2022, and its head office is there. In Australia the importer named in the warranty is Sigenergy Australia Pty Ltd in North Sydney, so a warranty claim lands with an Australian company.

Can I add modules to a SigenStor later?

Sigenergy's battery datasheets put one to six modules under one controller. The warranty's model list allows one to six of the BAT 5.0, 6.0, 8.0 or 10.0 modules under a controller. Sigenergy's brochure says the stack supports mixed use of new and aged batteries. The Clean Energy Council register lists approved builds that mix both module generations as of 20 October 2026.

How long does a SigenStor last?

The warranty promises 70% of usable capacity for 10 years, or until the energy allowance is used up. At one full cycle a day the 10 years arrive first on every module size. The allowance works out at about 3,700 to 3,800 full cycles.

Who handles a Sigenergy warranty claim in Perth?

A claim goes through the mySigen app within 30 days of the fault. If the app is unavailable, it goes through your installer or Sigenergy's national office. The importer behind the warranty is Sigenergy Australia Pty Ltd in North Sydney.

Can a SigenStor go outside in Perth?

The battery modules are rated IP66 and work from -20°C to 55°C, so they are rated for a sheltered outside wall. The warranty recommends 10°C to 30°C, so a spot out of the afternoon sun is the better one. The three-phase controllers are rated IP66.

Where is Sigenergy based?

Sigenergy is headquartered in Shanghai, China and was founded in 2022. Its products are sold in Australia through SAA-accredited installers.

Are Sigenergy products CEC approved?

Sigenergy has held Clean Energy Council approved-product listings since 2024. CEC approval is a baseline safety and quality check, and rebates are only paid on approved products.

Batteries

What battery chemistry does Sigenergy use?

Sigenergy's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.

Sources

Are you Sigenergy?

Help us keep this profile up to date.

Get in touch

Where next

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.