Loading Solar Battery Perth...

Hybrid inverter · Shenzhen Sinexcel Isuna Energy Technology · Isuna series · CEC approved August 2025

Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

CEC listing: Isuna 10000T (AS4777-2 2020)

A 10 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$4,750; Estimate for the inverter alone — your quote will vary
Rated power: 10kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Isuna series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 10kW
Max efficiency How much of the solar you make reaches the house: 98.2%
Phases Needs a three-phase supply — check your switchboard: 3-phase
MPPT trackers 2 roof faces can be tuned independently: 2
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Shenzhen Sinexcel Isuna Energy Technology Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	10 kW
Efficiency
Max efficiency	98.2%
European efficiency	97.7%
DC input & MPPT
MPPT trackers	2
Physical
Weight	35 kg
IP rating	IP65
Operating temperature	-25°C to 60°C
Installation requirements
AC breaker	120 A
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

22 Aug 2025

Approval expiry

22 Aug 2028

Status

Active

Eligible for rebates

Yes

About Shenzhen Sinexcel Isuna Energy Technology Co Ltd

Years in AU Market

1 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$3,500–$6,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.5 kWh
Annual yield: 15,513 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T against the closest-power inverters from other brands.

Specification	Shenzhen Sinexcel Isuna Energy Technology Isuna 10000TShenzhen Sinexcel Isuna Energy Technology	Energizer Force 10.0HS+Energizer	Energizer Force 10.0HT+Energizer

Rated power?	10 kW	10 kW	10 kW
Max efficiency?	98.2%best value	0.0%	0.0%
MPPT trackers?	2	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

The warranty covers defects in materials and workmanship under normal use for a period of 5 years. To make a claim, contact the manufacturer with proof of purchase, and modifications or unauthorized installations will void the warranty.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Modifications to the inverter or non-accredited installation void the warranty.

Read the official warranty document (PDF)

Fault & error codes — Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

From the install manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

FAN_FAILUREcriticalCall your installer
Manual (PDF)
Fan failure detected
Likely cause
External fan is blocked or malfunctioning.
What to do
Inspect and remove any obstructions, check fan operation.
INSULATION_FAULTcriticalCall your installer
Manual (PDF)
Insulation fault detected
Likely cause
Insulation resistance is below minimum requirement.
What to do
Check insulation resistance and rectify any shorts.
PV1/2_OVERVOLTAGEcriticalCall your installer
Manual (PDF)
PV 1 or 2 overvoltage
Likely cause
PV string voltage exceeds maximum input voltage of inverter.
What to do
Reduce PV string voltage to acceptable range.
PV1/2_REVERSE_CONNECTIONcriticalCall your installer
Manual (PDF)
PV 1 or 2 reverse connection
Likely cause
Positive and negative terminals are reversed.
What to do
Check connections and correct the polarity.
AMBIENT_TEMPERATURE_HIGHwarning
Manual (PDF)
Ambient temperature too high
Likely cause
Inverter is exposed to direct sunlight or high ambient heat.
What to do
Relocate inverter to a cooler area.
BATTERY1/2_NOT_CONNECTEDwarning
Manual (PDF)
Battery 1 or 2 not connected
Likely cause
Check whether the battery is correctly connected.
What to do
Verify battery connections.
BATTERY1/2_OVERVOLTAGEwarning
Manual (PDF)
Battery 1 or 2 overvoltage
Likely cause
Battery voltage is higher than specs.
What to do
Check battery specifications and adjust if necessary.
GRID_VOLTAGE_ANOMALYwarningCall your installer
Manual (PDF)
Grid voltage anomaly
Likely cause
Grid voltage is outside acceptable range.
What to do
Monitor grid voltage and report to a technician.
PV1/2_NOT_CONNECTEDwarning
Manual (PDF)
PV 1 or 2 not connected
Likely cause
Check whether the PV modules are correctly connected and the circuit breaker is closed.
What to do
Verify connections and close circuit breaker if necessary.
PV1/2_OVERLOAD_TIMEOUTwarning
Manual (PDF)
PV 1 or 2 overload timeout
Likely cause
Inverter is overloaded.
What to do
Allow inverter to cool down and then reset.

Part of the Shenzhen Sinexcel Isuna Energy Technology Isuna series

Compare every Shenzhen Sinexcel Isuna Energy Technology Isuna variant side by side →

More Shenzhen Sinexcel Isuna Energy Technology Co Ltd Inverters

Isuna 12000T (AS4777-2 2020)

12 kW · 3φ

Isuna 15000T (AS4777-2 2020)

15 kW · 3φ

Isuna 18000T (AS4777-2 2020)

18 kW · 3φ

Isuna 20000T (AS4777-2 2020)

20 kW · 3φ

Isuna 3000S (AS4777-2 2020)

3 kW · 1φ

Isuna 3600S (AS4777-2 2020)

3.6 kW · 1φ

View all Shenzhen Sinexcel Isuna Energy Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Shenzhen Sinexcel Isuna Energy Technology · Isuna series · CEC approved August 2025

Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

CEC listing: Isuna 10000T (AS4777-2 2020)

A 10 kW three-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$4,750; Estimate for the inverter alone — your quote will vary
Rated power: 10kW; How much solar it can run at once — a large roof
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Isuna series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It needs a three-phase supply — check your switchboard, or ask your installer.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 10kW
Max efficiency How much of the solar you make reaches the house: 98.2%
Phases Needs a three-phase supply — check your switchboard: 3-phase
MPPT trackers 2 roof faces can be tuned independently: 2
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Shenzhen Sinexcel Isuna Energy Technology Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	10 kW
Efficiency
Max efficiency	98.2%
European efficiency	97.7%
DC input & MPPT
MPPT trackers	2
Physical
Weight	35 kg
IP rating	IP65
Operating temperature	-25°C to 60°C
Installation requirements
AC breaker	120 A
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

22 Aug 2025

Approval expiry

22 Aug 2028

Status

Active

Eligible for rebates

Yes

About Shenzhen Sinexcel Isuna Energy Technology Co Ltd

Years in AU Market

1 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$3,500–$6,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 42.5 kWh
Annual yield: 15,513 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T against the closest-power inverters from other brands.

Specification	Shenzhen Sinexcel Isuna Energy Technology Isuna 10000TShenzhen Sinexcel Isuna Energy Technology	Energizer Force 10.0HS+Energizer	Energizer Force 10.0HT+Energizer

Rated power?	10 kW	10 kW	10 kW
Max efficiency?	98.2%best value	0.0%	0.0%
MPPT trackers?	2	Not verified	Not verified

Phases	Three-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Modifications to the inverter or non-accredited installation void the warranty.

Read the official warranty document (PDF)

Fault & error codes — Shenzhen Sinexcel Isuna Energy Technology Isuna 10000T

From the install manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

FAN_FAILUREcriticalCall your installer
Manual (PDF)
Fan failure detected
Likely cause
External fan is blocked or malfunctioning.
What to do
Inspect and remove any obstructions, check fan operation.
INSULATION_FAULTcriticalCall your installer
Manual (PDF)
Insulation fault detected
Likely cause
Insulation resistance is below minimum requirement.
What to do
Check insulation resistance and rectify any shorts.
PV1/2_OVERVOLTAGEcriticalCall your installer
Manual (PDF)
PV 1 or 2 overvoltage
Likely cause
PV string voltage exceeds maximum input voltage of inverter.
What to do
Reduce PV string voltage to acceptable range.
PV1/2_REVERSE_CONNECTIONcriticalCall your installer
Manual (PDF)
PV 1 or 2 reverse connection
Likely cause
Positive and negative terminals are reversed.
What to do
Check connections and correct the polarity.
AMBIENT_TEMPERATURE_HIGHwarning
Manual (PDF)
Ambient temperature too high
Likely cause
Inverter is exposed to direct sunlight or high ambient heat.
What to do
Relocate inverter to a cooler area.
BATTERY1/2_NOT_CONNECTEDwarning
Manual (PDF)
Battery 1 or 2 not connected
Likely cause
Check whether the battery is correctly connected.
What to do
Verify battery connections.
BATTERY1/2_OVERVOLTAGEwarning
Manual (PDF)
Battery 1 or 2 overvoltage
Likely cause
Battery voltage is higher than specs.
What to do
Check battery specifications and adjust if necessary.
GRID_VOLTAGE_ANOMALYwarningCall your installer
Manual (PDF)
Grid voltage anomaly
Likely cause
Grid voltage is outside acceptable range.
What to do
Monitor grid voltage and report to a technician.
PV1/2_NOT_CONNECTEDwarning
Manual (PDF)
PV 1 or 2 not connected
Likely cause
Check whether the PV modules are correctly connected and the circuit breaker is closed.
What to do
Verify connections and close circuit breaker if necessary.
PV1/2_OVERLOAD_TIMEOUTwarning
Manual (PDF)
PV 1 or 2 overload timeout
Likely cause
Inverter is overloaded.
What to do
Allow inverter to cool down and then reset.

Part of the Shenzhen Sinexcel Isuna Energy Technology Isuna series

Compare every Shenzhen Sinexcel Isuna Energy Technology Isuna variant side by side →

More Shenzhen Sinexcel Isuna Energy Technology Co Ltd Inverters

Isuna 12000T (AS4777-2 2020)

12 kW · 3φ

Isuna 15000T (AS4777-2 2020)

15 kW · 3φ

Isuna 18000T (AS4777-2 2020)

18 kW · 3φ

Isuna 20000T (AS4777-2 2020)

20 kW · 3φ

Isuna 3000S (AS4777-2 2020)

3 kW · 1φ

Isuna 3600S (AS4777-2 2020)

3.6 kW · 1φ

View all Shenzhen Sinexcel Isuna Energy Technology Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data