Hybrid inverter · Shenzhen Sinexcel Isuna Energy Technology · CEC approved August 2025
CEC listing: Isuna 8000T (AS4777-2 2020)
An 8 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Shenzhen Sinexcel Isuna Energy Technology Isuna 8000T, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 10 kW |
| Efficiency | |
| Max efficiency | 98.2% |
| European efficiency | 97.7% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| Weight | 35 kg |
| IP rating | IP65 |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| AC breaker | 120 A |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Shenzhen Sinexcel Isuna Energy Technology Isuna 8000T against the closest-power inverters from other brands.
| Specification | Shenzhen Sinexcel Isuna Energy Technology Isuna 8000TShenzhen Sinexcel Isuna Energy Technology | Energizer Force 8.0HS+Energizer | Energizer Force 8.0HT+Energizer |
|---|---|---|---|
| Rated power? | 8 kW | 8 kW | 8 kW |
| Max efficiency? | 98.2% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The warranty covers defects in materials and workmanship under normal use for a period of 5 years. To make a claim, contact the manufacturer with proof of purchase, and modifications or unauthorized installations will void the warranty.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.
FAN_FAILUREcriticalCall your installerFan failure detected
INSULATION_FAULTcriticalCall your installerInsulation fault detected
PV1/2_OVERVOLTAGEcriticalCall your installerPV 1 or 2 overvoltage
PV1/2_REVERSE_CONNECTIONcriticalCall your installerPV 1 or 2 reverse connection
AMBIENT_TEMPERATURE_HIGHwarningAmbient temperature too high
BATTERY1/2_NOT_CONNECTEDwarningBattery 1 or 2 not connected
BATTERY1/2_OVERVOLTAGEwarningBattery 1 or 2 overvoltage
GRID_VOLTAGE_ANOMALYwarningCall your installerGrid voltage anomaly
PV1/2_NOT_CONNECTEDwarningPV 1 or 2 not connected
PV1/2_OVERLOAD_TIMEOUTwarningPV 1 or 2 overload timeout
Isuna D8K-TL-AU (AS4777-2 2020)
8 kW · 3φ
Isuna D8K-TL-S-AU (AS4777-2 2020)
8 kW · 3φ
Isuna D9.9K-TL-AU (AS4777-2 2020)
9.9 kW · 3φ
Isuna D9.9K-TL-S-AU (AS4777-2 2020)
9.9 kW · 3φ
Isuna 6000T (AS4777-2 2020)
6 kW · 3φ
Isuna D6K-TL-AU (AS4777-2 2020)
6 kW · 3φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.