Solar inverter · Ningbo Sunways Technologies · STT-4~25KTL series · CEC approval expired
CEC listing: STT-17KTL (AS4777-2 2020)
A 17 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Ningbo Sunways Technologies STT-17KTL, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98.1% |
| European efficiency | 98.2% |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 500 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
| Earthing method | PE |
| DNSP pre-approval | No |
| Estimated install time | 5 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
The Ningbo Sunways Technologies STT-17KTL against the closest-power inverters from other brands.
| Specification | Ningbo Sunways Technologies STT-17KTLNingbo Sunways Technologies | Afore AF17K-THAfore | Solplanet ASW17K-LT-G2-ASolplanet |
|---|---|---|---|
| Rated power? | 17 kW | 17 kW | 17 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Three-phase | Three-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
The warranty covers defects for 5 years. It excludes damages from non-authorized modification and must be claimed with the original purchase receipt.
The warranty covers defects for 5 years. It excludes damages from non-authorized modification and must be claimed with the original purchase receipt.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 19 of 19. The official install manual is the authoritative source — always confirm before acting.
AC Transducer FaultcriticalCall your installerAC transducer anomaly.
Bus Voltage FaultcriticalCall your installerBUS voltage is over-high.
DCI FaultcriticalCall your installerDC Injection High.
E2 FaultcriticalCall your installerInternal storage anomaly.
Flash FaultcriticalCall your installerInternal storage anomaly.
GFCI Device FaultcriticalCall your installerGFCI device anomaly.
GFCI FaultcriticalCall your installerExcessive leakage current.
Grid Frequency FaultcriticalCall your installerGrid over frequency or under-frequency.
Grid Voltage FaultcriticalCall your installerGrid overvoltage or undervoltage.
Relay Check FailcriticalCall your installerSelf-checking of relay fails.
SCI FaultcriticalCall your installerInternal communication fails.
SPI FaultcriticalCall your installerInternal communication fails.
External Fan FaultwarningCall your installerExternal fan anomaly.
Internal Fan FaultwarningCall your installerInternal fan anomaly.
Inverter Over TemperaturewarningCall your installerTemperature anomaly inside the inverter.
ISO Over LimitationwarningCall your installerLow system insulation resistance.
Mains LostwarningCall your installerGrid power outage, AC switch or circuit is disconnected.
No DisplaywarningNo Display
PV Over VoltagewarningCall your installerPV over voltage is too high.
STT-15KTL (AS4777-2 2020)
15 kW · 1φ
STT-20KTL (AS4777-2 2020)
20 kW · 1φ
STT-12KTL-P (AS4777-2 2020)
12 kW · 1φ
STS-11KTL (AS4777-2 2020)
11 kW · 1φ
STS-10KTL (AS4777-2 2020)
10 kW · 1φ
STT-10KTL (AS4777-2 2020)
10 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.