Hybrid inverter · Deye · CEC approved October 2026
CEC listing: SUN-75K-SG02HP3-AU-EM6 (AS4777-2 2020)
A 75 kW three-phase hybrid inverter that is battery-ready.
Commercial-scale inverter
At 75 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Deye SUN-75K-SG02HP3-AU-EM6, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.6% |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 500 mm |
| Side clearance | 500 mm |
| AC breaker | 100 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Website
au.deyeinverter.comThe Deye SUN-75K-SG02HP3-AU-EM6 against the closest-power inverters from other brands.
| Specification | Solplanet ASW75K-LTSolplanet | FoxESS H3-75-PlusFoxESS | |
|---|---|---|---|
| Rated power? | 75 kW | 75 kW | 75 kW |
| Max efficiency? | 97.6% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Hybrid | Solar | Hybrid |
| Battery ready | Yes | No | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This solar inverter has a warranty of up to 10 years, covering defects in materials and workmanship. It excludes issues from non-accredited installations, and claims can be made by contacting support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 25 of 25. The official install manual is the authoritative source — always confirm before acting.
F01criticalCall your installerDC input polarity reverse fault
F07criticalCall your installerDC_START_Failure
F15criticalCall your installerAC over current fault of software
F16criticalCall your installerAC leakage current fault
F18criticalCall your installerAC over current fault of hardware
F20criticalCall your installerDC over current fault of the hardware
F21criticalCall your installerBUS over current
F23criticalCall your installerTransient over current fault
F24criticalCall your installerDC insulation failure
F34criticalCall your installerAC Overcurrent fault
F46criticalCall your installerBackup battery fault
F55criticalCall your installerDC busbar voltage is too high
F56criticalCall your installerDC busbar voltage is too low
F58criticalCall your installerBMS communication fault
F64criticalCall your installerHeat sink high temperature failure
F22warningRemotely shutdown
F26warningDC busbar is unbalanced
F29warningCall your installerParallel CAN Bus fault
F41warningCall your installerParallel system stop
F42warningCall your installerAC line low voltage
F47warningCall your installerAC over frequency
F48warningCall your installerAC lower frequency
F62warningCall your installerDRM function issue
F63warningCall your installerARC fault detection
F13infoWorking mode change
SUN-70K-SG02HP3-AU-EM6 (AS4777-2 2020)
70 kW · 3φ
SUN-80K-SG02HP3-AU-EM6 (AS4777-2 2020)
80 kW · 3φ
SUN-60K-SG02HP3-AU-EM6 (AS4777-2 2020)
60 kW · 3φ
SUN-50K-SG01HP3-AU-BM4 (AS4777-2 2020)
50 kW · 3φ
SUN-100K-PCS01HP3-AU (AS4777-2 2020)
100 kW · 3φ
SUN-40K-SG01HP3-AU-BM4 (AS4777-2 2020)
40 kW · 3φ
Other CEC-approved products from Deye available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.