Loading Solar Battery Perth...
Loading Solar Battery Perth...
Deye
Rated Power
4.6 kW
Max Efficiency
—
Phases
Single Phase
Max Input Voltage
—
Min Input Voltage
—
Max Input Current
—
Output Voltage
—
Max Output Current
—
Country of Origin
Unknown
Series
Grid-connected PV inverter
Dimensions
0 x 0 x 0 mm
IP Rating
IP65
Operating Temp
-25°C to 60°C
Cooling
Natural
Battery Compatible
No
Backup Capable
No
ESM Compliant
No
Black Start
No
Grid Forming
No
Export Limiting
No
Remote Monitoring
No
CEC Approved
6 Mar 2026
Approval Expiry
6 May 2027
Status
Active
Eligible for Rebates
Yes
Years in AU Market
6 years
Australian Office
Not verified
CEC-Approved Batteries
53
CEC-Approved Panels
0
Category
Mid-Tier
$782–$1,564
Perth installed price estimate · medium confidence
Prices vary by installer, configuration, and site complexity. Get exact quotes via our installer matching.
From May 1, 2026, all new battery installations in WA require CSIP-AUS compliant inverters. Verify ESM status with your installer.
Perth's high ambient temperatures (regularly 35°C+) can reduce inverter efficiency and trigger thermal throttling. For installations in direct sun or non-ventilated garages, consider inverters with active cooling and wide operating temperature ranges. All grid-connected installations require Western Power approval.
Compare this inverter with batteries for a complete system analysis
Based on 5 PSH/day (BOM) with 15% system derate.
Website
www.dfrdsolar.com.auThe Deye SUN-4.6K-G04-AU (AS4777-2 2020) against the closest-power inverters from other brands.
| Specification | 8 Star Energy Pty Ltd FORCE 4.6HS (AS4777-2 2020)8 Star Energy Pty Ltd | 8 Star Energy Pty Ltd Force 4.6S (AS4777-2 2020)8 Star Energy Pty Ltd | |
|---|---|---|---|
| Rated power? | 4.6 kW | 4.6 kW | 4.6 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | Not verified | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Warranty summary
This inverter is covered under a 10-year warranty that includes parts and labor for manufacturing defects. It excludes damage resulting from improper installation or operation.
This inverter is covered under a 10-year warranty that includes parts and labor for manufacturing defects. It excludes damage resulting from improper installation or operation.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 9 of 9. The official install manual is the authoritative source — always confirm before acting.
F01criticalDC input polarity reverse fault
F02criticalDC insulation impedance permanent fault
F04criticalGround fault GFDI
F05criticalCall your installerRead the memory error
F06criticalCall your installerWrite the memory error
F10criticalCall your installerAuxiliary switch power supply failure
F15criticalCall your installerAC firmware over current
F03warningCall your installerDC leakage current fault
F13warningCall your installerWorking mode changed/Grid mode changed
Part of the Deye Grid-connected PV inverter series
Compare every Deye Grid-connected PV inverter variant side by side →
AI-W5.1-10P3-AU-B (AS4777-2 2020)
10 kW · 3φ
AI-W5.1-12P3-AU-B (AS4777-2 2020)
12 kW · 3φ
AI-W5.1-3.6P1-AU-B (AS4777-2 2020)
3.6 kW · 1φ
AI-W5.1-5P1-AU-B (AS4777-2 2020)
5 kW · 1φ
AI-W5.1-5P3-AU-B (AS4777-2 2020)
5 kW · 3φ
AI-W5.1-6P1-AU-B (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from Deye available in Australia.
Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.