Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Energizer · Force HS-AS Series series · CEC approved April 2024
CEC listing: FORCE 4.6HS (AS4777-2 2020)
A 4.6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page — no review written yet
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Warranty
How long 8 Star Energy Pty Ltd stands behind it
Every figure on file for the Energizer FORCE 4.6HS, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97.8% |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
4 Apr 2024
Approval expiry
4 Apr 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
3 years
Australian Office
Not verified
CEC-Approved Batteries
6
CEC-Approved Panels
72
Category
Budget
Typical installed, inverter only
$1,610–$2,760
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Energizer FORCE 4.6HS against the closest-power inverters from other brands.
| Specification | Energizer FORCE 4.6HSEnergizer | Energizer Force 4.6SEnergizer | Afore New Energy Technology AF4.6K-SLAfore New Energy Technology |
|---|---|---|---|
| Rated power? | 4.6 kW | 4.6 kW | 4.6 kW |
| Max efficiency? | 97.8%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Solar | Hybrid |
| Battery ready | Yes | No | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for Energizer Solar inverters for up to 10 years. It excludes damages due to improper installation, misuse, and failure to follow claim procedures.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Energizer Force HS-AS Series series
Compare every Energizer Force HS-AS Series variant side by side →
Force 10.0HS+ (AS4777-2 2020)
10 kW · 1φ
Force 10.0HT+ (AS4777-2 2020)
10 kW · 3φ
Force 10.0S (AS4777-2 2020)
10 kW · 1φ
Force 10.5HS+ (AS4777-2 2020)
10.5 kW · 1φ
Force 10.5S (AS4777-2 2020)
10.5 kW · 1φ
Force 12.0HT+ (AS4777-2 2020)
12 kW · 3φ
Other CEC-approved products from 8 Star Energy Pty Ltd available in Australia.
PS2900H-2
5.76 kWh · LFP
PS2900H-3
8.64 kWh · LFP
PS2900H-4
11.52 kWh · LFP
PS2900H-5
14.4 kWh · LFP
PS2900H-6
17.28 kWh · LFP
PS2900H-7
20.16 kWh · LFP
ENSP48NDG3440BF (IEC 61215-2021)
440W · 22.5% · Mono PERC
ENSP48NDG3440BL (IEC 61215-2021)
440W · 22.5% · Mono PERC
ENSP48NDG3445BF (IEC 61215-2021)
445W · 22.8% · Mono PERC
ENSP48NDG3445BL (IEC 61215-2021)
445W · 22.8% · Mono PERC
ENSP48NDG3450BF (IEC 61215-2021)
450W · 23.0% · Mono PERC
ENSP48NDG3450BL (IEC 61215-2021)
450W · 23.0% · Mono PERC
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.