Hybrid inverter · Deye · CEC approved July 2026
CEC listing: AI-W5.1-10P1-AU-B (AS4777-2 2020)
A 10 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Deye AI-W5.1-10P1-AU-B, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 250 A |
| Cable gauge | 70 mm² |
| Earthing method | Stable and reliable ground point, resistance not less than 0.1Ω |
| DNSP pre-approval | No |
| Estimated install time | 4 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
au.deyeinverter.comThe Deye AI-W5.1-10P1-AU-B against the closest-power inverters from other brands.
| Specification | Solplanet ASW010K-SHSolplanet | Solplanet ASW10000-S-ASolplanet | |
|---|---|---|---|
| Rated power? | 9.999 kW | 9.999 kW | 9.999 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The product has a 10-year warranty covering defects in materials and workmanship. It excludes damage from improper installation or modifications. Claims can be made by contacting support at the provided email.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 7 of 7. The official install manual is the authoritative source — always confirm before acting.
BMS faultcriticalCall your installerBMS fault detected
Charge low temperature protectioncriticalCall your installerMin cell temperature below operational range
Charge or discharge high temperature protectioncriticalCall your installerMax cell temperature exceeded
Discharge low temperature protectioncriticalCall your installerMin cell temperature is too low
Electrochemical cell faultcriticalCall your installerCell voltage is low or unbalanced
Overvoltage protectioncriticalCall your installerCell voltage exceeds safe limit
Under voltage protectioncriticalCall your installerBattery voltage is too low
SUN-10K-G02P1-AU-AM2 (AS4777-2 2020)
9.999 kW · 1φ
SUN-10K-SG02LP1-AU-AM3 (AS4777-2 2020)
9.999 kW · 1φ
SUN-10K-SG05LP1-AU-AM2-P (AS4777-2 2020)
9.999 kW · 1φ
Al-W5.1-10P1-AU-B (AS4777-2 2020)
10 kW · 1φ
SUN-10.5K-G02P1-AU-AM2 (AS4777-2 2020)
10.5 kW · 1φ
SUN-9K-G02P1-AU-AM2 (AS4777-2 2020)
9 kW · 1φ
Other CEC-approved products from Deye available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.