Hybrid inverter · Jiangsu Weiheng Intelligent Technology · CEC approved May 2025
CEC listing: WH-TIA502 (AS4777-2 2020)
A 5 kW three-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Jiangsu Weiheng Intelligent Technology WH-TIA502, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 5 kW |
| Maximum power | 9 kW |
| Apparent power | 5 kVA |
| Phases | 3 |
| Efficiency | |
| European efficiency | 100% |
| CEC-weighted efficiency | 100% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 1000 V |
| MPPT voltage min | 850 V |
| MPPT voltage max | 880 V |
| Max input current | 16 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 5 kW |
| Physical | |
| Dimensions (H×W×D) | 500 × 400 × 200 mm |
| Weight | 50 kg |
| IP rating | IP65 |
| Cooling | Air |
| Operating temperature | -10°C to 50°C |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| AC breaker | 63 A |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Jiangsu Weiheng Intelligent Technology WH-TIA502 against the closest-power inverters from other brands.
| Specification | Jiangsu Weiheng Intelligent Technology WH-TIA502Jiangsu Weiheng Intelligent Technology | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | 1 | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in materials and workmanship for five years. To make a claim, ensure the product is not modified or improperly installed, and contact customer support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 3 of 3. The official install manual is the authoritative source — always confirm before acting.
DSP faultcriticalCall your installerDigital Signal Processing fault
Battery com. faultwarningBattery communication fault
Meter com. faultinfoMeter communication fault
WH-THA502 (AS4777-2 2020)
5 kW · 3φ
WH-THA602 (AS4777-2 2020)
6 kW · 3φ
WH-TIA602 (AS4777-2 2020)
6 kW · 3φ
WH-THA802 (AS4777-2 2020)
8 kW · 3φ
WH-TIA802 (AS4777-2 2020)
8 kW · 3φ
WH-THA103 (AS4777-2 2020)
10 kW · 3φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.