Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Hiconics Eco-energy Drive Technology
  4. MD-HI3.8-SHO

Hybrid inverter · Hiconics Eco-energy Drive Technology · CEC approved May 2026

Hiconics Eco-energy Drive Technology MD-HI3.8-SHO

CEC listing: MD-HI3.8-SHO (AS4777-2 2020)

A 3.8 kW single-phase hybrid inverter that is battery-ready.

Rated power
3.8kWHow much solar it can run at once
Battery-ready
YesHybrid: a battery plugs straight in, no second box
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

MD-HI3.8-SHO: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
3.8kW
How much solar it can turn into usable power at once
Max efficiency
97.6%
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
Type
Hybrid
Runs solar and a battery from one unit
Warranty
10yr
How long Hiconics Eco-energy Drive Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the Hiconics Eco-energy Drive Technology MD-HI3.8-SHO, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency97.6%
Physical
Dimensions (H×W×D)638 × 408 × 237 mm
Weight30.5 kg
IP ratingIP65
Installation requirements
Top clearance100 mm
Side clearance100 mm
AC breaker32 A
Cable gauge4 mm²
Earthing methodTN-S
DNSP pre-approvalYes
Estimated install time8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
20 May 2026
Approval expiry
30 Apr 2029
Status
Active
Listed for STCs
Yes

About Hiconics Eco-energy Drive Technology

Years on the CEC list
3 years
Australian office
Not verified
Category
Budget
CEC-approved inverters
50
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • Browse CEC-approved panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
16.1 kWh
Annual yield
5,895 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years on the CEC list

How it compares

The Hiconics Eco-energy Drive Technology MD-HI3.8-SHO against the closest-power inverters from other brands.

Specification
Hiconics Eco-energy Drive Technology MD-HI3.8-SHOHiconics Eco-energy Drive Technology
Hiconics Eco-energy Drive Technology HEC2-S3.8Hr2Hiconics Eco-energy Drive Technology
Hiconics Eco-energy Drive Technology MEI2-HS3.8H-AIO1Hiconics Eco-energy Drive Technology
Rated power?3.8 kW3.8 kW3.8 kW
Max efficiency?97.6%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeHybridHybridHybrid
Battery readyYesYesYes
Warranty10 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

10-year inverter warranty

Hiconics Eco-energy Drive Technology MD-HI3.8-SHO

The GOODWE warranty covers the inverter for up to 10 years and includes a 5-year spare parts warranty. Claims must be made within one month of the fault.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Void if installed by unaccredited installers, modified, or tampered with.
Environment limits
Not covered if exposed to sea coasts/saltwater or aggressive environmental conditions without prior approval.
Read the official warranty document (PDF)

Fault & error codes — Hiconics Eco-energy Drive Technology MD-HI3.8-SHO

From the install manual

20 documented

Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.

  • 1088criticalCall your installer
    Manual (PDF)

    Grid overvoltage/high voltage

    Likely cause
    Grid voltage is higher than the set value.
    What to do
    Measure the actual grid voltage. If it's higher, contact the power company. Check protection parameter settings and confirm they are correct. Contact customer service if problems persist.
  • 1090criticalCall your installer
    Manual (PDF)

    Grid overvoltage (10 minutes)

    Likely cause
    Grid voltage has been over the threshold for 10 minutes.
    What to do
    Wait for the inverter to return to normal. Check the grid voltage. Contact customer service if problems persist.
  • 1091criticalCall your installer
    Manual (PDF)

    Grid undervoltage/low voltage

    Likely cause
    Grid voltage is lower than the set value.
    What to do
    Measure the actual grid voltage. If it's lower, contact the power company. Check protection parameter settings. Contact customer service if problems persist.
  • 1092criticalCall your installer
    Manual (PDF)

    Grid overfrequency/high frequency

    Likely cause
    Grid frequency is higher than the set threshold.
    What to do
    Measure the actual grid frequency. If it's higher, contact the power company. Check protection parameter settings. Contact customer service if problems persist.
  • 1093criticalCall your installer
    Manual (PDF)

    Grid underfrequency/low frequency

    Likely cause
    Grid frequency is lower than the set threshold.
    What to do
    Measure the actual grid frequency. If it's lower, contact the power company. Check protection parameter settings. Contact customer service if problems persist.
  • 1095criticalCall your installer
    Manual (PDF)

    Inverter overcurrent fault

    Likely cause
    Fail-safe threshold is set too low.
    What to do
    Contact customer service to adjust fail-safe thresholds.
  • 1096criticalCall your installer
    Manual (PDF)

    Inverter transient overcurrent fault

    Likely cause
    Fail-safe threshold is set too low or hardware issue.
    What to do
    Check fail-safe settings, contact customer service if the problem persists.
  • 1218criticalCall your installer
    Manual (PDF)

    Ground Fault

    Likely cause
    AC cable may be incorrectly wired or insulation is damaged.
    What to do
    Check wiring sequence and insulation integrity. Contact customer service if the issue persists.
  • 1300criticalCall your installer
    Manual (PDF)

    Output short circuit fault

    Likely cause
    Incorrect wiring has caused a short circuit.
    What to do
    Confirm wiring and correct any issues. Power down the inverter until resolved.
  • 1301criticalCall your installer
    Manual (PDF)

    Insulation impedance fault

    Likely cause
    Either the insulation value is too low or there's a fault in the circuits.
    What to do
    Consult the battery manufacturer for a solution.
  • 1302criticalCall your installer
    Manual (PDF)

    Battery reverse fault

    Likely cause
    Incorrect battery connections or polarity.
    What to do
    Consult the battery manufacturer for resolution.
  • 1089warningCall your installer
    Manual (PDF)

    Grid transient overvoltage

    Likely cause
    Transient overvoltage condition detected on the grid.
    What to do
    Wait for the grid to return to normal. Contact customer service if the fault occurs repeatedly.
  • 1152warningCall your installer
    Manual (PDF)

    PV1 Reverse Fault

    Likely cause
    The polarity of the PV input is reversed.
    What to do
    Check and correct the polarity of the PV input.
  • 1163warningCall your installer
    Manual (PDF)

    PV1 Overcurrent Fault

    Likely cause
    Current exceeds allowable limit on PV1 input.
    What to do
    Power down the inverter and restart. Contact customer service if the issue remains.
  • 1164warningCall your installer
    Manual (PDF)

    PV2 Overcurrent Fault

    Likely cause
    Current exceeds allowable limit on PV2 input.
    What to do
    Power down the inverter and restart. Contact customer service if the issue remains.
  • 1181warningCall your installer
    Manual (PDF)

    PV1 Overvoltage

    Likely cause
    Voltage on PV1 input is above the allowable limit.
    What to do
    Power down the inverter and restart. If the issue persists, contact customer service.
  • 1182warningCall your installer
    Manual (PDF)

    PV1 Undervoltage

    Likely cause
    Voltage on PV1 input is below the allowable limit.
    What to do
    Power down the inverter and restart. If the issue persists, contact customer service.
  • 1183warningCall your installer
    Manual (PDF)

    PV2 Overvoltage

    Likely cause
    Voltage on PV2 input is above the allowable limit.
    What to do
    Power down the inverter and restart. If the issue persists, contact customer service.
  • 1184warningCall your installer
    Manual (PDF)

    PV2 Undervoltage

    Likely cause
    Voltage on PV2 input is below the allowable limit.
    What to do
    Power down the inverter and restart. If the issue persists, contact customer service.
  • 1216warningCall your installer
    Manual (PDF)

    Leakage current exceeds the standard

    Likely cause
    Humid conditions or poor insulation may have led to this fault.
    What to do
    Improve environmental conditions, check insulation of cables. Contact customer service if the issue persists.

More Hiconics Eco-energy Drive Technology Co Ltd inverters

HEC2-S3.8Hr2 (AS4777-2 2020)

3.8 kW · 1φ

MEI2-HS3.8H-AIO1 (AS4777-2 2020)

3.8 kW · 1φ

MH-HYIV3.8-SHE-AU (AS4777-2 2020)

3.8 kW · 1φ

HEC-S 3K (AS4777-2 2020)

3.68 kW · 1φ

MEI2-HS3.68H-AIO1 (AS4777-2 2020)

3.68 kW · 1φ

MH-HYIV3.68-SHE-AU (AS4777-2 2020)

3.68 kW · 1φ

View all Hiconics Eco-energy Drive Technology Co Ltd inverters

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?