Solar inverter · Grundfos Holding A S · RSI 0100 series · CEC approved May 2024
A 14.9 kW three-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Grundfos Holding A S RSI0100-3L-0031-4-X, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Physical | |
| IP rating | IP66 |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Grundfos Holding A S RSI0100-3L-0031-4-X against the closest-power inverters from other brands.
| Specification | Grundfos Holding A S RSI0100-3L-0031-4-XGrundfos Holding A S | Sofar HYD-14.9K-T1-ASofar | |
|---|---|---|---|
| Rated power? | 14.9 kW | 14.9 kW | 14.9 kW |
| Max efficiency? | 97.0% | Not on file | Not on file |
| MPPT trackers? | 1 | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
This warranty covers defects in materials and workmanship under normal use. It does not cover damages due to improper installation or use in environments outside of specified conditions.
This warranty covers defects in materials and workmanship under normal use. It does not cover damages due to improper installation or use in environments outside of specified conditions.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 5 of 5. The official install manual is the authoritative source — always confirm before acting.
1criticalCall your installerOvercurrent (hardware fault)
10criticalCall your installerOvervoltage (hardware fault)
2criticalCall your installerOvercurrent (software fault)
20criticalCall your installerEarth fault (hardware fault)
30criticalCall your installerSafe Torque Off
RSI0100-3L-0038-4-X
18.2 kW · 3φ
RSI0100-3L-0016-4-X
7.7 kW · 3φ
RSI0100-3L-0012-4-X
5.8 kW · 3φ
RSI0100-3L-0009-4-X
4.6 kW · 3φ
RSI0100-3L-0005-4-X
2.7 kW · 3φ
RSI0100-3L-0061-4-X
29.3 kW · 3φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.