Loading Solar Battery Perth...
Loading Solar Battery Perth...
Rated Power
2.7 kW
Max Efficiency
—
Phases
Three Phase
Max Input Voltage
—
Min Input Voltage
—
Max Input Current
—
Output Voltage
—
Max Output Current
—
Country of Origin
Unknown
Series
RSI 0100
Dimensions
0 x 0 x 0 mm
IP Rating
IP65
Operating Temp
-25°C to 60°C
Cooling
Natural
Battery Compatible
No
Backup Capable
No
ESM Compliant
No
Black Start
No
Grid Forming
No
Export Limiting
No
Remote Monitoring
No
CEC Approved
20 May 2024
Approval Expiry
20 May 2027
Status
Active
Eligible for Rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Unknown
$540–$1,080
Perth installed price estimate · medium confidence
Prices vary by installer, configuration, and site complexity. Get exact quotes via our installer matching.
From May 1, 2026, all new battery installations in WA require CSIP-AUS compliant inverters. Verify ESM status with your installer.
Perth's high ambient temperatures (regularly 35°C+) can reduce inverter efficiency and trigger thermal throttling. For installations in direct sun or non-ventilated garages, consider inverters with active cooling and wide operating temperature ranges. All grid-connected installations require Western Power approval.
Compare this inverter with batteries for a complete system analysis
Based on 5 PSH/day (BOM) with 15% system derate.
The Grundfos Holding A S RSI0100-3L-0005-4-X against the closest-power inverters from other brands.
| Specification | Grundfos Holding A S RSI0100-3L-0005-4-XGrundfos Holding A S | Vacon Ltd VACON0100-3L-0005-4-XVacon Ltd | |
|---|---|---|---|
| Rated power? | 2.7 kW | 2.7 kW | 2.7 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | 0 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Warranty summary
This warranty covers defects in materials and workmanship under normal use. It does not cover damages due to improper installation or use in environments outside of specified conditions.
This warranty covers defects in materials and workmanship under normal use. It does not cover damages due to improper installation or use in environments outside of specified conditions.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 5 of 5. The official install manual is the authoritative source — always confirm before acting.
1criticalCall your installerOvercurrent (hardware fault)
10criticalCall your installerOvervoltage (hardware fault)
2criticalCall your installerOvercurrent (software fault)
20criticalCall your installerEarth fault (hardware fault)
30criticalCall your installerSafe Torque Off
Part of the Grundfos Holding A S RSI 0100 series
Compare every Grundfos Holding A S RSI 0100 variant side by side →
RSI0100-3L-0009-4-X
4.6 kW · 3φ
RSI0100-3L-0012-4-X
5.8 kW · 3φ
RSI0100-3L-0016-4-X
7.7 kW · 3φ
RSI0100-3L-0031-4-X
14.9 kW · 3φ
RSI0100-3L-0038-4-X
18.2 kW · 3φ
RSI0100-3L-0061-4-X
29.3 kW · 3φ
Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.