Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. GoodWe
  4. GW120K-HT

Solar inverter · GoodWe · CEC approval expired

GoodWe GW120K-HT

CEC listing: GW120K-HT (AS4777-2 2020)

A 120 kW three-phase solar inverter.

Rated power
120kWHow much solar it can run at once: a large roof
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter

Commercial-scale inverter

At 120 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.

Browse home-size inverters →
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

GW120K-HT: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It needs a three-phase supply, so check your switchboard or ask your installer.
  • Its CEC approval has expired, so a new install with it wouldn't qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
120kW
How much solar it can turn into usable power at once
Max efficiency
98.6%
How much of the solar you make reaches the house
Phases
3-phase
Needs a three-phase supply, so check your switchboard
Type
Solar
Runs solar only
Warranty
5yr
How long GoodWe Technologies Co Ltd stands behind it

Full datasheet

Every figure on file for the GoodWe GW120K-HT, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency98.6%
European efficiency98.3%
Physical
IP ratingIP66

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
25 Aug 2025
Approval expiry
10 Sept 2026
Status
Not listed
Listed for STCs
No (not listed)

About GoodWe

Years on the CEC list
12 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
229
CEC-approved batteries
30
CEC-approved panels
168
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • GoodWe Technologies Co Ltd batteries and panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Australian office

Has local presence

Website

www.goodwe.com.au
12 years on the CEC list

How it compares

The GoodWe GW120K-HT against the closest-power inverters from other brands.

Specification
GoodWe GW120K-HTGoodWe
GoodWe GEP120-10GoodWe
Ping An Electric Power Technology PA-ESS-241L120-APing An Electric Power Technology
Rated power?120 kW120 kW120 kW
Max efficiency?98.6%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesThree-phaseSingle-phaseThree-phase
TypeSolarSolarBattery
Battery readyNoNoYes
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty terms and installation guidePDF, opens in a new tab

5-year inverter warranty

GoodWe GW120K-HT

The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by unauthorized modifications. For claims, contact the service center with proof of purchase.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Pro-rata — value reduces with age
If you sell the home
Transfers to the next homeowner
What voids it
Non-accredited installation, modification of the inverter, damage due to improper handling or negligence.
Environment limits
None specified
Read the official warranty document (PDF)

Fault & error codes — GoodWe GW120K-HT

From the install manual

17 documented

Showing 17 of 17. The official install manual is the authoritative source — always confirm before acting.

  • DC Bus HighcriticalCall your installer
    Manual (PDF)

    DC Bus High

    Likely cause
    Issues with voltage levels in DC bus
    What to do
    Contact local service department for assistance.
  • DCI HighcriticalCall your installer
    Manual (PDF)

    DC Injection High

    Likely cause
    Excess DC injection
    What to do
    Contact local service department for assistance.
  • EEPROM FailcriticalCall your installer
    Manual (PDF)

    EEPROM Read/Write Failure

    Likely cause
    Malfunctioning EEPROM component
    What to do
    Contact local service department for assistance.
  • Fac FailcriticalCall your installer
    Manual (PDF)

    Frequency Adjustment Failure

    Likely cause
    Issues with grid frequency
    What to do
    Contact local service department for assistance.
  • GFCI FailurecriticalCall your installer
    Manual (PDF)

    GFCI Device Failure

    Likely cause
    Ground Fault Circuit Interrupter issue
    What to do
    Inspect GFCI connections; contact service if needed.
  • Gnd I FailcriticalCall your installer
    Manual (PDF)

    Ground I Failure

    Likely cause
    Grounding issues detected
    What to do
    Follow troubleshooting steps; contact service if unresolved.
  • Isolation FailcriticalCall your installer
    Manual (PDF)

    Isolation Failure

    Likely cause
    Grounding issue or fault
    What to do
    Disconnect DC switch and measure impedance; contact support if low.
  • PV Over VoltagecriticalCall your installer
    Manual (PDF)

    PV Over Voltage

    Likely cause
    PV string voltage exceeds limits
    What to do
    Disconnect DC switch and check PV voltage; reconfigure if necessary.
  • PV** over CurrcriticalCall your installer
    Manual (PDF)

    PV hardware current over range

    Likely cause
    Excess current from PV strings
    What to do
    Check PV string connection; if error persists, contact support.
  • Ref-V Chek FailcriticalCall your installer
    Manual (PDF)

    Reference Voltage Check Failure

    Likely cause
    Incorrect reference voltage detected
    What to do
    Contact local service department for assistance.
  • Relay FailcriticalCall your installer
    Manual (PDF)

    Relay Check Failure

    Likely cause
    Relay malfunction
    What to do
    Contact local service department for assistance.
  • SPI Comm FailcriticalCall your installer
    Manual (PDF)

    Internal Communication Failure

    Likely cause
    Faulty internal communication connections
    What to do
    Contact local service department for assistance.
  • Utility LosscriticalCall your installer
    Manual (PDF)

    Utility Loss

    Likely cause
    Grid connection issue
    What to do
    Check grid connections and rectify; contact service if needed.
  • Vac FailcriticalCall your installer
    Manual (PDF)

    Voltage AC Failure

    Likely cause
    Inadequate grid voltage
    What to do
    Check grid connections and contact service department.
  • ExFan Failwarning
    Manual (PDF)

    External Fan Failure

    Likely cause
    Faulty external fan
    What to do
    Inspect and possibly replace external fan; contact support if needed.
  • InFan Failwarning
    Manual (PDF)

    Internal Fan Failure

    Likely cause
    Faulty internal fan
    What to do
    Check internal fan operation; contact service if not functioning.
  • Over Temperaturewarning
    Manual (PDF)

    Over Temperature

    Likely cause
    Inadequate cooling or high ambient temperature
    What to do
    Inspect for proper cooling; contact service if issue persists.

More GoodWe Technologies Co Ltd inverters

GW125K-GT (AS4777-2 2020)

125 kW · 3φ

GW125K-PCS-N-G10 (AS4777-2 2020)

125 kW · 3φ

GW125K-PCS-N-G11 (AS4777-2 2020)

125 kW · 3φ

GW110K-GT (AS4777-2 2020)

110 kW · 3φ

GW110K-HT (AS4777-2 2020)

110 kW · 3φ

GW100K-ET-G10 (AS4777-2 2020)

100 kW · 3φ

View all GoodWe Technologies Co Ltd inverters

More from GoodWe

Other CEC-approved products from GoodWe available in Australia.

GoodWe Batteries

GW100KWH-D-10

100.8 kWh · LFP

GW102.4-BAT-AC-G10

100 kWh · LFP

GW112.6-BAT-AC-G10

110 kWh · LFP

GW5.1-BAT-D-G20

5 kWh · LFP

GW5.1-BAT-D-G21

5 kWh · LFP

GW6.0-BAT-D-G20

5.9 kWh · LFP

View all GoodWe batteries

GoodWe Solar Panels

BMM-T3/108A(505W)

505W

BMM-T3/108A(510W)

510W

BMM-T3/108A(515W)

515W

BMM-T3/120A(565W)

565W

BMM-T3/120A(570W)

570W

BMM-T3/120A(575W)

575W

View all GoodWe panels
View full GoodWe manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?